Analysis of corona motors and micromotors by means of effective gap conductivity

Corona motors are of possible interest in miniature applications because of their insensitivity to material properties and their ability to produce torque with DC excitation. These motors act through repulsive forces, and can be built in self-levitating arrangements to minimize friction. The nonlinear electrical characteristics are modeled through Fourier analysis of the stator input voltage and current waveforms. An equivalent gap conductivity is defined, and used to provide a linearized model of the charge and field distributions at the rotor surface. The analysis helps explain how a corona motor generates high speeds with DC excitation, and points out the basis for its asynchronous operation. Experimental tests of a macroscopic motor confirm that the model successfully describes the basic behavior of a corona motor. Operation of a small (100 /spl mu/m) cylindrical motor is considered through simulation. Such a device is expected to be capable of very high speeds with DC input and no special control. >

[1]  R. D. Findlay,et al.  An examination of the scaling properties of electric micromotors and their magnetic duals , 1991 .

[2]  W. J. Orvis,et al.  Field emission from tungsten-clad silicon pyramids , 1989 .

[3]  R. Muller,et al.  Frictional study of IC-processed micromotors , 1990 .

[4]  Stephen F. Bart,et al.  An analysis of electroquasistatic induction micromotors , 1989 .

[5]  J. Lang,et al.  Electric micromotor dynamics , 1992 .

[6]  Mehran Mehregany,et al.  Micromotor operation in a liquid environment , 1992, Technical Digest IEEE Solid-State Sensor and Actuator Workshop.

[7]  J. Lang,et al.  A comparative study of bearing designs and operational environments for harmonic side-drive micromotors , 1992, [1992] Proceedings IEEE Micro Electro Mechanical Systems.

[8]  Paul C. Krause,et al.  Analysis of electric machinery , 1987 .

[9]  Stephen F. Bart,et al.  Design considerations for micromachined electric actuators , 1988 .

[10]  Stephen C. Jacobsen,et al.  A design overview of an eccentric-motion electrostatic microactuator (the wobble motor) , 1989 .

[11]  J. H. Lang,et al.  Operation of microfabricated harmonic and ordinary side-drive motors , 1990, IEEE Proceedings on Micro Electro Mechanical Systems, An Investigation of Micro Structures, Sensors, Actuators, Machines and Robots..

[12]  Yu-Chong Tai,et al.  IC-processed electrostatic synchronous micromotors , 1989 .

[13]  D. A. Dunn,et al.  A surface-charge induction motor , 1971 .

[14]  G. Quincke,et al.  Ueber Rotationen im constanten electrischen Felde , 1896 .

[15]  H. Sandmaier,et al.  An electrohydrodynamic micropump , 1990, IEEE Proceedings on Micro Electro Mechanical Systems, An Investigation of Micro Structures, Sensors, Actuators, Machines and Robots..

[16]  J. Lang,et al.  Micromotor fabrication , 1992 .

[17]  Philip T. Krein,et al.  Harmonic Effects in Electrostatic Induction Motors , 1985 .

[18]  R. Muller,et al.  IC-processed electrostatic micromotors , 1989 .

[19]  W. Benecke,et al.  Microfabricated electrohydrodynamic (EHD) pumps for liquids of higher conductivity , 1992 .