Preparation of pH-Responsive Hydrogels Based on Chondroitin Sulfate/Alginate for Oral Drug Delivery

This study investigates pH-sensitive hydrogels based on biocompatible, biodegradable polysaccharides and natural polymers such as chondroitin sulfate and alginate in combination with synthetic monomer such as acrylic acid, as controlled drug carriers. Investigations were conducted for chondroitin sulfate/alginate-graft-poly(acrylic acid) hydrogel in various mixing ratios of chondroitin sulfate, alginate and acrylic acid in the presence of ammonium persulfate and N′,N′-Methylene bisacrylamide. Crosslinking and loading of drug were confirmed by Fourier transform infrared spectroscopy. Thermal stability of both polymers was enhanced after crosslinking as indicated by thermogravimetric analysis and differential scanning calorimeter thermogram of developed hydrogel. Similarly, surface morphology was evaluated by scanning electron microscopy, whereas crystallinity of the polymers and developed hydrogel was investigated by powder X-ray diffraction. Furthermore, swelling and drug-release studies were investigated in acidic and basic medium of pH 1.2 and 7.4 at 37 °C, respectively. Maximum swelling and drug release were detected at pH 7.4 as compared to pH 1.2. Increased incorporation of hydrogel contents led to an increase in porosity, drug loading, and gel fraction while a reduction in sol fraction was seen. The polymer volume fraction was found to be low at pH 7.4 compared to pH 1.2, indicating a prominent and greater swelling of the prepared hydrogels at pH 7.4. Likewise, a biodegradation study revealed a slow degradation rate of the developed hydrogel. Hence, we can conclude from the results that a fabricated system of hydrogel could be used as a suitable carrier for the controlled delivery of ketorolac tromethamine.

[1]  P. Wu,et al.  In-vitro and in-vivo evaluation of biocompatible polymeric microgels for pH- driven delivery of Ketorolac tromethamine. , 2022, International journal of pharmaceutics.

[2]  M. Suhail,et al.  Designing and In Vitro Characterization of pH-Sensitive Aspartic Acid-Graft-Poly(Acrylic Acid) Hydrogels as Controlled Drug Carriers , 2022, Gels.

[3]  Yu-Wen Lin,et al.  Fabrication of alginate based microgels for drug-sustained release: In-vitro and in-vivo evaluation. , 2021, International journal of biological macromolecules.

[4]  K. Khan,et al.  Designing gelatin-based swellable hydrogels system for controlled delivery of salbutamol sulphate: characterization and toxicity evaluation , 2021, Polymer Bulletin.

[5]  Narsimha Mamidi,et al.  Design, fabrication and drug release potential of dual stimuli-responsive composite hydrogel nanoparticle interfaces. , 2021, Colloids and surfaces. B, Biointerfaces.

[6]  M. Al-Tabakha,et al.  Synthesis, Characterization and Safety Evaluation of Sericin-Based Hydrogels for Controlled Delivery of Acyclovir , 2021, Pharmaceuticals.

[7]  N. Akhtar,et al.  Porous and highly responsive cross-linked β-cyclodextrin based nanomatrices for improvement in drug dissolution and absorption. , 2020, Life sciences.

[8]  S. Noreen,et al.  Fabrication and evaluation of pH sensitive chemically cross-linked interpenetrating network [Gelatin/Polyvinylpyrrolidone-co-poly(acrylic acid)] for targeted release of 5-fluorouracil , 2020, Polymer Bulletin.

[9]  Zhanhu Guo,et al.  Tunneling-induced negative permittivity in Ni/MnO nanocomposites by a bio-gel derived strategy , 2020, Journal of Materials Chemistry C.

[10]  Z. Hussain,et al.  HEMA based pH-sensitive semi IPN microgels for oral delivery; a rationale approach for ketoprofen , 2020, Drug development and industrial pharmacy.

[11]  A. Mujumdar,et al.  Generation of sustained release chitosan nanoparticles for delivery of ketorolac tromethamine: a tubular microreactor approach , 2020, International Journal of Polymeric Materials and Polymeric Biomaterials.

[12]  N. Malik,et al.  Chondroitin sulfate-based smart hydrogels for targeted delivery of oxaliplatin in colorectal cancer: preparation, characterization and toxicity evaluation , 2019, Polymer Bulletin.

[13]  G. Murtaza,et al.  Pectin-based (LA-co-MAA) Semi-IPNS as a Potential Biomaterial for Colonic Delivery of Oxaliplatin. , 2019, International journal of pharmaceutics.

[14]  A. Lugao,et al.  PVGA/Alginate-AgNPs hydrogel as absorbent biomaterial and its soil biodegradation behavior , 2019, Polymer Bulletin.

[15]  M. Minhas,et al.  pH-responsive smart gels of block copolymer [pluronic F127-co-poly(acrylic acid)] for controlled delivery of Ivabradine hydrochloride: its toxicological evaluation , 2019, Journal of Polymer Research.

[16]  A. Mujumdar,et al.  Preparation and characterization of ketorolac tromethamine-loaded ethyl cellulose micro-/nanospheres using different techniques , 2019 .

[17]  A. Mujumdar,et al.  Preparation and characterization of miglitol-loaded Poly (d, l-lactide-co-glycolide) microparticles using high pressure homogenization-solvent evaporation method , 2019 .

[18]  F. Azam,et al.  Thiolation of arabinoxylan and its application in the fabrication of pH-sensitive thiolated arabinoxylan grafted acrylic acid copolymer , 2019, Drug development and industrial pharmacy.

[19]  G. Murtaza,et al.  Gelatin-based hydrogels as potential biomaterials for colonic delivery of oxaliplatin. , 2019, International journal of pharmaceutics.

[20]  Baljit Singh,et al.  Functionalization of carbopol with NVP for designing antibiotic drug loaded hydrogel dressings for better wound management , 2019, Journal of Pharmaceutical and Biopharmaceutical Research.

[21]  G. Murtaza,et al.  Facile Synthesis of Chitosan Based-(AMPS-co-AA) Semi-IPNs as a Potential Drug Carrier: Enzymatic Degradation, Cytotoxicity, and Preliminary Safety Evaluation. , 2019, Current drug delivery.

[22]  G. Murtaza,et al.  Fabrication and in vitro characterization of HPMC-g-poly(AMPS) hydrogels loaded with loxoprofen sodium. , 2018, International journal of biological macromolecules.

[23]  Mahmood Ahmad,et al.  Development and characterization of pH-responsive polyethylene glycol-co-poly(methacrylic acid) polymeric network system for colon target delivery of oxaliplatin: Its acute oral toxicity study , 2018 .

[24]  Ikrima Khalid,et al.  Synthesis and evaluation of chondroitin sulfate based hydrogels of loxoprofen with adjustable properties as controlled release carriers. , 2018, Carbohydrate polymers.

[25]  Deepa K. Raj,et al.  Preparation, characterization and biological evaluation of curcumin loaded alginate aldehyde-gelatin nanogels. , 2016, Materials science & engineering. C, Materials for biological applications.

[26]  David J. Mooney,et al.  Designing hydrogels for controlled drug delivery. , 2016, Nature reviews. Materials.

[27]  A. Oladipo,et al.  Facile synthesis of glucose-sensitive chitosan-poly(vinyl alcohol) hydrogel: Drug release optimization and swelling properties. , 2016, International journal of biological macromolecules.

[28]  M. Sabaa,et al.  Synthesis, characterization and applications of N-quaternized chitosan/poly(vinyl alcohol) hydrogels. , 2015, International journal of biological macromolecules.

[29]  M. Sohail,et al.  Controlled delivery of valsartan by cross-linked polymeric matrices: Synthesis, in vitro and in vivo evaluation. , 2015, International journal of pharmaceutics.

[30]  S. El-hamouly,et al.  RADIATION PREPARATION OF SMART HYDROGEL HAS ANTIMICROBIAL PROPERTIES FOR CONTROLLED RELEASE OF CIPROFLOXACIN IN DRUG DELIVERY SYSTEMS , 2015 .

[31]  H. Khan,et al.  Formulation and Evaluation of Mouth Disintegrating Tablets of Atenolol and Atorvastatin , 2015, Indian journal of pharmaceutical sciences.

[32]  Samiullah Khan,et al.  Effect of degree of cross-linking on swelling and on drug release of low viscous chitosan/poly(vinyl alcohol) hydrogels , 2014, Polymer Bulletin.

[33]  M. Türk,et al.  Ketorolac Tromethamine Loaded Chitosan Nanoparticles as a Nanotherapeutic System for Ocular Diseases Göz Hastaliklari İçin Nanoterapötik Sistem Olarak Ketorolak Trometamin Yüklü Kitosan , 2013 .

[34]  K. Abbulu,et al.  Ketorolac Tromethamine Loaded Liposomes of Long Alkyl Chain Lipids: Development, Characterization and In Vitro Performance , 2012 .

[35]  M. Qadir,et al.  Water uptake and drug release behaviour of methyl methacrylateco-itaconic acid [P(MMA/IA)] hydrogels cross-linked with methylene bis-acrylamide , 2011 .

[36]  M. S. Hossain,et al.  Evaluation of Kollidon SR based Ketorolac Tromethamine Loaded Transdermal Film , 2011 .

[37]  E. Tambourgi,et al.  Smart hollow microspheres of chondroitin sulfate conjugates and magnetite nanoparticles for magnetic vector. , 2010, Journal of colloid and interface science.

[38]  T. Aminabhavi,et al.  Novel pH-Sensitive Hydrogels Prepared from the Blends of Poly(vinyl alcohol) with Acrylic Acid-graft-Guar Gum Matrixes for Isoniazid Delivery , 2010 .

[39]  B. Stoica,et al.  CELLULOSE / CHONDROITIN SULFATE HYDROGELS : SYNTHESIS , DRUG LOADING / RELEASE PROPERTIES AND BIOCOMPATIBILITY , 2010 .

[40]  V. Sinha,et al.  Ketorolac tromethamine formulations: an overview , 2009, Expert opinion on drug delivery.

[41]  J. R. Amrutkar,et al.  Chitosan–Chondroitin Sulfate Based Matrix Tablets for Colon Specific Delivery of Indomethacin , 2009, AAPS PharmSciTech.

[42]  H. Mansur,et al.  Properties and biocompatibility of chitosan films modified by blending with PVA and chemically crosslinked , 2009, Journal of materials science. Materials in medicine.

[43]  R. V. Kulkarni,et al.  Polyacrylamide-Grafted-Alginate-Based pH-Sensitive Hydrogel Beads for Delivery of Ketoprofen to the Intestine: in Vitro and in Vivo Evaluation , 2009, Journal of biomaterials science. Polymer edition.

[44]  Mehrdad Hamidi,et al.  Hydrogel nanoparticles in drug delivery. , 2008, Advanced drug delivery reviews.

[45]  S. Mathew,et al.  Formulation and evaluation of ketorolac tromethamine-loaded albumin microspheres for potential intramuscular administration , 2007, AAPS PharmSciTech.

[46]  M. A. Moharram,et al.  Application of FTIR spectroscopy for structural characterization of ternary poly(acrylic acid)–metal–poly(vinyl pyrrolidone) complexes , 2007 .

[47]  O. Şanlı,et al.  Release characteristics of diclofenac sodium from poly(vinyl alcohol)/sodium alginate and poly(vinyl alcohol)-grafted-poly(acrylamide)/sodium alginate blend beads. , 2007, European journal of pharmaceutics and biopharmaceutics : official journal of Arbeitsgemeinschaft fur Pharmazeutische Verfahrenstechnik e.V.

[48]  Yu‐Der Lee,et al.  Synthesis and characterizations of amphiphilic poly(L-lactide)-grafted chondroitin sulfate copolymer and its application as drug carrier. , 2007, Biomolecular engineering.

[49]  Bruno Sarmento,et al.  Characterization of insulin-loaded alginate nanoparticles produced by ionotropic pre-gelation through DSC and FTIR studies , 2006 .

[50]  A. Khademhosseini,et al.  Hydrogels in Biology and Medicine: From Molecular Principles to Bionanotechnology , 2006 .

[51]  M. Shoaib,et al.  Evaluation of drug release kinetics from ibuprofen matrix tablets using HPMC. , 2006, Pakistan journal of pharmaceutical sciences.

[52]  S. A. Dergunov,et al.  Radiation synthesis and characterization of stimuli-sensitive chitosan–polyvinyl pyrrolidone hydrogels , 2005 .

[53]  Sayed M. Ahmed,et al.  Proniosomes as a drug carrier for transdermal delivery of ketorolac. , 2005, European journal of pharmaceutics and biopharmaceutics : official journal of Arbeitsgemeinschaft fur Pharmazeutische Verfahrenstechnik e.V.

[54]  Yung-Chih Wu,et al.  A novel pH-sensitive hydrogel composed of N,O-carboxymethyl chitosan and alginate cross-linked by genipin for protein drug delivery. , 2004, Journal of controlled release : official journal of the Controlled Release Society.

[55]  É. Cavalheiro,et al.  Thermal behavior of alginic acid and its sodium salt , 2004, Ecletica Quimica.

[56]  Li-Fang Wang,et al.  Synthesis and characterization of chondroitin sulfate-methacrylate hydrogels , 2003 .

[57]  N. Peppas,et al.  A simple equation for the description of solute release. III. Coupling of diffusion and relaxation , 1989 .