Reverse logistics and closed-loop supply chain of Waste Electrical and Electronic Equipment (WEEE)/E-waste: A comprehensive literature review

Abstract Reverse logistics (RL) and the closed-loop supply chain (CLSC) are integral parts of the holistic waste management process. One of the important end-of-life (EOL) products considered in the RL/CLSC is Waste Electrical and Electronic Equipment (WEEE)/E-waste. Numerous research papers were published in the RL and CLSC disciplines focusing WEEE separately. However, there is no single review article found on the product-specific issues. To bridge this gap, a total of 157 papers published between 1999 and May 2017 were selected, categorized, analyzed using content analysis method. The method involves four steps: material collection, descriptive analysis, category selection and material evaluation. For the systematic literature review, the steps were followed and four main types of research in the field of RL and CLSC of E-waste, namely designing and planning of reverse distribution, decision making and performance evaluation, conceptual framework, and qualitative studies were identified and reviewed. Research gaps in literature were diagnosed to suggest future research opportunities. The review first of its kind that may provide a useful reference for academicians, researchers and industry practitioners for a better understanding of WEEE focused RL/CLSC activities and research.

[1]  Harold Krikke,et al.  Impact of closed-loop network configurations on carbon footprints: A case study in copiers , 2011 .

[2]  Samir K. Srivastava,et al.  Network design for reverse logistics , 2008 .

[3]  Manu Sharma,et al.  Asset management with reverse product flows and environmental considerations , 2007, Comput. Oper. Res..

[4]  Chwen Sheu,et al.  A model for reverse logistics entry by third-party providers , 2002 .

[5]  Maria Tereza Saraiva de Souza,et al.  REVERSE LOGISTICS OF E-WASTE IN DEVELOPING COUNTRIES: CHALLENGES AND PROSPECTS FOR THE BRAZILIAN MODEL , 2016 .

[6]  Gengui Zhou,et al.  WEEE recycling in Zhejiang Province, China: generation, treatment, and public awareness , 2016 .

[7]  Ch Achillas,et al.  Decision support system for the optimal location of electrical and electronic waste treatment plants: a case study in greece. , 2010, Waste management.

[8]  Lili Yang,et al.  Information flow in reverse logistics: an industrial information integration study , 2012, Inf. Technol. Manag..

[9]  Jinhui Li,et al.  Status quo of e-waste management in mainland China , 2006 .

[10]  Christos Zikopoulos,et al.  On the effect of quality overestimation in remanufacturing , 2010 .

[11]  Martin Grunow,et al.  Designing the reverse network for WEEE in Denmark , 2009 .

[12]  Cherng Ying Chiou,et al.  Consideration Factors of Reverse Logistics Implementation -A Case Study of Taiwan's Electronics Industry , 2012 .

[13]  Elif Akçali,et al.  Network design for reverse and closed-loop supply chains: An annotated bibliography of models and solution approaches , 2009 .

[14]  Saeed Mansour,et al.  To develop a third-party reverse logistics network for end-of-life vehicles in Iran , 2013 .

[15]  L. Beril Toktay,et al.  How Collection Cost Structure Drives a Manufacturer's Reverse Channel Choice , 2013 .

[16]  Lawrence A. Machi,et al.  The literature review : six steps to success , 2009 .

[17]  Jack R. Meredith,et al.  Theory Building through Conceptual Methods , 1993 .

[18]  M. Eugene Merchant,et al.  A WEB-BASED SYSTEM FOR REVERSE MANUFACTURING AND PRODUCT ENVIRONMENTAL IMPACT ASSESSMENT CONSIDERING END-OF-LIFE DISPOSITIONS , 2004 .

[19]  Bersam Bolat,et al.  Proposal of a Stochastic Programming Model for Reverse Logistics Network Design under Uncertainties , 2014 .

[20]  Huseyin Selcuk Kilic,et al.  Reverse logistics system design for the waste of electrical and electronic equipment (WEEE) in Turkey , 2015 .

[21]  P. Mayring Qualitative content analysis: theoretical foundation, basic procedures and software solution , 2014 .

[22]  Gilvan C. Souza,et al.  How Does Product Recovery Affect Quality Choice? , 2013 .

[23]  V D R Guide,et al.  A closed-loop logistics model for remanufacturing , 1999, J. Oper. Res. Soc..

[24]  Shuo-Yan Chou,et al.  Optimizing reverse logistic costs for recycling end-of-life electrical and electronic products , 2012, Expert Syst. Appl..

[25]  Stefan Seuring,et al.  Conducting a Literature Review — The Example of Sustainability in Supply Chains , 2005 .

[26]  David de la Fuente,et al.  Optimization of a Reverse Logistics Network within the Ambit of Mobile Phones , 2006, IC-AI.

[27]  Si Yuan Cheng,et al.  Research on Re-Use Reverse Logistics Network of Disused Electric Appliances Based on Election Campaign Algorithm , 2013 .

[28]  Daoud Ait-Kadi,et al.  A stochastic programming approach for designing supply loops , 2008 .

[29]  A. Tan,et al.  Improving the performance of a computer company in supporting its reverse logistics operations in the Asia‐Pacific region , 2003 .

[30]  G. Leong,et al.  A dual channel, quality-based price competition model for the WEEE recycling market with government subsidy , 2016 .

[31]  L. Guerra,et al.  Reverse logistics for electrical and electronic equipment: a modular simulation model , 2009 .

[32]  Gerald W. Evans,et al.  A goal programming model for the operation of closed-loop supply chains , 2009 .

[33]  Björn Niehaves,et al.  Reconstructing the giant: On the importance of rigour in documenting the literature search process , 2009, ECIS.

[34]  Gilvan C. Souza,et al.  The Optimal Disposition Decision for Product Returns , 2008 .

[35]  Müjde Erol Genevois,et al.  WEEE treatment strategies' evaluation using fuzzy LINMAP method , 2011, Expert Syst. Appl..

[36]  Hua Zhong,et al.  Composition and evaluation of Waste Electric and Electronic Equipment reverse logistics capability , 2010, 2010 IEEE International Conference on Industrial Engineering and Engineering Management.

[38]  Pauline Ong,et al.  Reverse Logistics Network Design for End of Life Computer in Malaysia , 2014 .

[39]  Saumya Dixit,et al.  Towards improved understanding of reverse logistics – Examining mediating role of return intention , 2016 .

[40]  Otto Rentz,et al.  Special Section: Closed-Loop Supply Chains: Practice and Potential: Closed-Loop Supply Chains for Spent Batteries , 2003, Interfaces.

[41]  Sajjad Shokouhyar,et al.  Designing a sustainable recovery network for waste from electrical and electronic equipment using a genetic algorithm , 2017 .

[42]  Hilmi Yuksel An Analytical Hierarchy Process decision model for e-waste collection center location selection , 2009, 2009 International Conference on Computers & Industrial Engineering.

[43]  Tzong-Ru Lee,et al.  An investigation of perception gap of reverse logistics service quality: the case of mobile phone industry , 2007 .

[44]  Manoj Kumar Tiwari,et al.  A PSO-based optimum consumer incentive policy for WEEE incorporating reliability of components , 2012 .

[45]  Sajjad Shokouhyar,et al.  Optimizing a warranty–based sustainable product service system using game theory , 2018 .

[46]  José Luis González Velarde,et al.  Designing routes for WEEE collection: the vehicle routing problem with split loads and date windows , 2013, J. Heuristics.

[47]  Rizauddin Ramli,et al.  MULTI-CRITERIA DECISION MAKING FOR REVERSE LOGISTIC CONTRACTOR SELECTION IN E-WASTE RECYCLING INDUSTRY USING POLYTOMOUS RASCH MODEL , 2015 .

[48]  Shamsuddin Ahmed,et al.  Electronic waste: present status and future perspectives of sustainable management practices in Malaysia , 2014, Environmental Earth Sciences.

[49]  H. Kaebernick,et al.  Remaining life estimation of used components in consumer products: Life cycle data analysis by Weibull and artificial neural networks , 2007 .

[50]  Ake Tonanont,et al.  Performance Evaluation In Reverse Logistics With Data Envelopment Analysis , 2009 .

[51]  George Nenes,et al.  A multi-period model for managing used product returns , 2012 .

[52]  Carsten Franke,et al.  Remanufacturing of mobile phones—capacity, program and facility adaptation planning , 2006 .

[53]  R. Shankar,et al.  Productivity improvement of a computer hardware supply chain , 2005 .

[54]  G. Stevens Integrating the Supply Chain , 1989 .

[55]  Sami Kara,et al.  Simulation modelling of reverse logistics networks , 2007 .

[56]  Carsten Nagel,et al.  Caught between ecology and economy: end-of-life aspects of environmentally conscious manufacturing , 1999 .

[57]  Saeed Mansour,et al.  A model for integrating services and product EOL management in sustainable product service system (S-PSS) , 2012, Journal of Intelligent Manufacturing.

[58]  E Iakovou,et al.  On the optimal design of the disassembly and recovery processes. , 2009, Waste management.

[59]  Rui-xia Zhang,et al.  Application of genetic algorithms for the design of WEEE logistics network model , 2010, 2010 International Conference on Intelligent Computing and Integrated Systems.

[60]  Mark Ferguson,et al.  Remanufacturing and the component commonality decision , 2013 .

[61]  Thomas L. Landers,et al.  The virtual warehousing concept , 2000 .

[62]  Marisa P. de Brito,et al.  A reverse logistics diagnostic tool: the case of the consumer electronics industry , 2010 .

[63]  V Pérez-Belis,et al.  An in-depth literature review of the waste electrical and electronic equipment context: Trends and evolution , 2015, Waste management & research : the journal of the International Solid Wastes and Public Cleansing Association, ISWA.

[64]  Gustavo Cattelan Nobre,et al.  Scientific literature analysis on big data and internet of things applications on circular economy: a bibliometric study , 2017, Scientometrics.

[65]  Duncan McFarlane,et al.  RFID-based product information in end-of-life decision making , 2007 .

[66]  Gül E. Okudan Kremer,et al.  A Modular Design Approach to Improve Product Life Cycle Performance Based on the Optimization of a Closed-Loop Supply Chain , 2014 .

[67]  Wuthichai Wongthatsanekorn,et al.  Reverse production system infrastructure design for electronic products in the state of Texas , 2012, Comput. Ind. Eng..

[68]  Erwin van der Laan,et al.  Quantitative models for reverse logistics: A review , 1997 .

[69]  Felix T.S. Chan,et al.  An integrated closed-loop supply chain model with location allocation problem and product recycling decisions , 2015 .

[70]  V. Guide,et al.  A Hierarchical Decision Model for Re-manufacturing and Re-use , 2003 .

[71]  Ana Paula Barbosa-Póvoa,et al.  The retrofit of a closed-loop distribution network: the case of lead batteries , 2010 .

[72]  Manoj Kumar Tiwari,et al.  Selection of a reverse logistics project for end-of-life computers: ANP and goal programing approach , 2008 .

[73]  L. N. Van Wassenhove,et al.  Concurrent product and closed-loop supply chain design with an application to refrigerators , 2003 .

[74]  Agis M. Papadopoulos,et al.  Transportation cost analysis of the Hellenic system for alternative management of Waste Electrical and Electronic Equipment , 2012 .

[75]  Felix T.S. Chan,et al.  Flexible decision modeling of reverse logistics system: A value adding MCDM approach for alternative selection , 2009 .

[76]  Grit Walther,et al.  Negotiation-based coordination in product recovery networks , 2008 .

[77]  Behrooz Karimi,et al.  Simulation-based optimization of ecological leasing: a step toward extended producer responsibility (EPR) , 2013 .

[78]  Manbir S. Sodhi,et al.  Models for recycling electronics end-of-life products , 2001, OR Spectr..

[79]  Sun Qiang,et al.  Robust reverse logistics network design for the waste of electrical and electronic equipment (WEEE) under recovery uncertainty. , 2016, Journal of environmental biology.

[80]  Amit Kumar,et al.  E-waste: An overview on generation, collection, legislation and recycling practices , 2017 .

[81]  Govindan Kannan,et al.  A genetic algorithm approach for solving a closed loop supply chain model: A case of battery recycling , 2010 .

[82]  O. Mont Product-Service Systems: Panacea or Myth? , 2008 .

[83]  Sibel A. Alumur,et al.  Collection Center Location with Equity Considerations in Reverse Logistics Networks , 2014, INFOR Inf. Syst. Oper. Res..

[84]  I-Lin Wang,et al.  Fast Heuristics for Designing Integrated E-Waste Reverse Logistics Networks , 2007, IEEE Transactions on Electronics Packaging Manufacturing.

[85]  K Moustakas,et al.  Multi-criteria analysis for the determination of the best WEEE management scenario in Cyprus. , 2008, Waste management.

[86]  Jonathan D. Linton,et al.  A Decision Support System for Planning Remanufacturing at Nortel Networks , 2000, Interfaces.

[87]  Kannan Govindan,et al.  A review of reverse logistics and closed-loop supply chains: a Journal of Cleaner Production focus , 2017 .

[88]  V.H. Machado,et al.  Waste Electrical and Electronic Equipment Management. A case study , 2010, 2010 IEEE International Conference on Industrial Engineering and Engineering Management.

[89]  Luk N. Van Wassenhove,et al.  Reverse Channel Design: The Case of Competing Retailers , 2006, Manag. Sci..

[90]  Jacqueline M. Bloemhof-Ruwaard,et al.  THE IMPACT OF PRODUCT RECOVERY ON LOGISTICS NETWORK DESIGN , 2001 .

[91]  Liu Xianfeng,et al.  Design and Simulation WEEE Reverse Logistics Network in Guangxi , 2010, 2010 International Conference on Optoelectronics and Image Processing.

[92]  Vaidyanathan Jayaraman,et al.  Production planning for closed-loop supply chains with product recovery and reuse: an analytical approach , 2006 .

[93]  Kang-Dae Lee,et al.  Vehicle routing in reverse logistics for recycling end-of-life consumer electronic goods in South Korea , 2009 .

[94]  Maria Isabel Gomes,et al.  Modelling a recovery network for WEEE: a case study in Portugal. , 2011, Waste management.

[95]  Lida Xu Engineering Informatics and Industrial Information Integration Engineering , 2014, 2014 Enterprise Systems Conference.

[96]  Qin Zhang,et al.  Global reverse supply chain design for solid waste recycling under uncertainties and carbon emission constraint. , 2017, Waste management.

[97]  Vedat Verter,et al.  Multi-period reverse logistics network design , 2012, Eur. J. Oper. Res..

[98]  Kannan Govindan,et al.  Reverse logistics and closed-loop supply chain: A comprehensive review to explore the future , 2015, Eur. J. Oper. Res..

[99]  Geraldo Ferrer,et al.  Value of information in remanufacturing complex products , 2004 .

[100]  A. Noorul Haq,et al.  Integration of closed loop distribution supply chain network and 3PRLP selection for the case of battery recycling , 2011 .

[101]  Rajesh Piplani,et al.  Robust optimisation approach to the design of service networks for reverse logistics , 2012 .

[103]  Tiago Barreto Rocha,et al.  Ambientronic: a Brazilian program to support the development of innovative projects in e-waste reverse logistics , 2013, MEDES.

[104]  Jiazhen Huo,et al.  Study on Integrated logistics Network Model and Network Design for Waste Electrical and Electronic Equipment , 2006, 2006 IEEE International Conference on Service Operations and Logistics, and Informatics.

[105]  Roland Geyer,et al.  The economics of cell phone reuse and recycling , 2010 .

[106]  Jian-Hua Yin,et al.  A fuzzy modeling and solution algorithm for optimization on E-waste reverse logistics , 2008, 2008 International Conference on Machine Learning and Cybernetics.

[107]  Nicolas Moussiopoulos,et al.  A multi-objective decision-making model to select waste electrical and electronic equipment transportation media , 2012 .

[108]  Christos Zikopoulos,et al.  Impact of uncertainty in the quality of returns on the profitability of a single-period refurbishing operation , 2007, Eur. J. Oper. Res..

[109]  Haji Hassan Masjuki,et al.  A public survey on knowledge, awareness, attitude and willingness to pay for WEEE management: Case study in Bangladesh , 2016 .

[110]  P. Guarnieri,et al.  A characterization of the Brazilian market of reverse logistic credits (RLC) and an analogy with the existing carbon credit market , 2017 .

[111]  Kwok Hung Lau,et al.  Reverse logistics in the electronic industry of China: a case study , 2009 .

[112]  Lei Lei,et al.  The construction of information platform about WEEE reverse logistic based on virtual symbiotic network , 2011, 2011 International Conference on E-Business and E-Government (ICEE).

[113]  Arkadiusz Kawa,et al.  Recovery Network Arrangements: The WEEE Case , 2011, ITEE.

[114]  V. Daniel R. Guide,et al.  OR FORUM - The Evolution of Closed-Loop Supply Chain Research , 2009, Oper. Res..

[115]  Paolo Trucco,et al.  Modelling and planning of Product Recovery Network: the case study of end-of-life refrigerators in Italy , 2008 .

[116]  K. Surya Prakasa Rao,et al.  Design of reverse and forward supply chain network: a case study , 2008 .

[117]  Jing Zhao,et al.  Reverse channel decisions for a fuzzy closed-loop supply chain , 2013 .

[118]  Naoko Tojo,et al.  Extended Producer Responsibility , 2013 .

[119]  Vasilis Fthenakis,et al.  Economic Feasibility of Recycling Photovoltaic Modules , 2010 .

[120]  Saeed Mansour,et al.  Simulation-based optimisation of a sustainable recovery network for Waste from Electrical and Electronic Equipment (WEEE) , 2013, Int. J. Comput. Integr. Manuf..

[121]  Wei Shanshan,et al.  Optimization model of e-waste reverse logistics and recycling network , 2008, 2008 3rd International Conference on Intelligent System and Knowledge Engineering.

[122]  Patrick Beullens,et al.  Closed-loop supply chain network equilibrium under legislation , 2007, Eur. J. Oper. Res..

[123]  Colin Fitzpatrick,et al.  Definition of generic re-use operating models for electrical and electronic equipment , 2012 .

[124]  Gülfem Tuzkaya,et al.  A methodology for the strategic design of reverse logistics networks and its application in the Turkish white goods industry , 2011 .

[125]  Dominique Millet,et al.  Designing a sustainable reverse logistics channel: the 18 generic structures framework , 2011 .

[126]  Albert Wee Kwan Tan,et al.  A decision making model to maximise the value of reverse logistics in the computer industry , 2008 .

[127]  Manoj Kumar Tiwari,et al.  Analyzing alternatives in reverse logistics for end-of-life computers: ANP and balanced scorecard approach , 2005, Comput. Ind. Eng..

[128]  Xiang Li,et al.  Collection pricing decision in a remanufacturing system considering random yield and random demand , 2009 .

[129]  I-Hsuan Hong,et al.  Modeling closed-loop supply chains in the electronics industry: A retailer collection application , 2012 .

[130]  Wei Deng Solvang,et al.  A reverse logistics network design model for sustainable treatment of multi-sourced Waste of Electrical and Electronic Equipment (WEEE) , 2013, 2013 IEEE 4th International Conference on Cognitive Infocommunications (CogInfoCom).

[131]  S. Seuring,et al.  Sustainable supply chain management and inter-organizational resources: a literature review , 2009 .

[132]  Cengiz Kahraman,et al.  Facility Location Selection in Reverse Logistics Using a Type-2 Fuzzy Decision Aid Method , 2014, Supply Chain Management Under Fuzziness.

[133]  Xiaofeng Wang,et al.  Optimal design of reverse logistics network on e-waste in Shanghai , 2011, Int. J. Netw. Virtual Organisations.

[134]  J. Millward-Hopkins,et al.  A pathway to circular economy: Developing a conceptual framework for complex value assessment of resources recovered from waste , 2017 .

[135]  M. Nashat Fors,et al.  E-waste reverse logistic optimization in Egypt , 2015, 2015 International Conference on Industrial Engineering and Operations Management (IEOM).

[136]  Oladele Osibanjo,et al.  Electronic waste (e-waste): material flows and management practices in Nigeria. , 2008, Waste management.

[137]  Saumya Dixit,et al.  Sustaining environment and organisation through e-waste management: a study of post consumption behaviour for mobile industry in India , 2013 .

[138]  S. Chopra,et al.  Supply Chain Management: Strategy, Planning & Operation , 2007 .

[139]  Trisha D. Anderson,et al.  The closed-loop supply chain network with competition, distribution channel investment, and uncertainties , 2013 .

[140]  Shasha Cao,et al.  Optimization of the flow distribution of e-waste reverse logistics network based on NSGA II and TOPSIS , 2011, 2011 International Conference on E-Business and E-Government (ICEE).

[141]  E. Hultink,et al.  The Circular Economy - A New Sustainability Paradigm? , 2017 .

[142]  L. V. Wassenhove,et al.  MANAGING PRODUCT RETURNS FOR REMANUFACTURING , 2001 .

[143]  Samir K. Srivastava Value recovery network design for product returns , 2008 .

[144]  E. Stanley Lee,et al.  A forecasting decision on the sales volume of printers in Taiwan: An exploitation of the Analytic Network Process , 2012, Comput. Math. Appl..

[145]  Arun Kumar,et al.  A decision‐making model for reverse logistics in the computer industry , 2006 .

[146]  Michael R. Galbreth,et al.  Offshore Remanufacturing with Variable Used Product Condition , 2010, Decis. Sci..

[147]  Der-Horng Lee,et al.  A HEURISTIC APPROACH TO LOGISTICS NETWORK DESIGN FOR END-OF-LEASE COMPUTER PRODUCTS RECOVERY , 2008 .

[148]  Eva Ponce-Cueto,et al.  Reverse Logistics for Used Portable Batteries in Spain: An Analytical Proposal for Collecting Batteries , 2011, ITEE.

[149]  P. Lens,et al.  Electronic waste as a secondary source of critical metals: Management and recovery technologies , 2017, Resources, Conservation and Recycling.

[150]  G. Kannan,et al.  Fuzzy approach for the selection of third party reverse logistics provider , 2009 .

[151]  Lúcia Helena Xavier,et al.  System dynamics applied to closed loop supply chains of desktops and laptops in Brazil: A perspective for social inclusion of waste pickers. , 2017, Waste management.

[152]  Wei Deng Solvang,et al.  A Stochastic Programming Approach with Improved Multi-Criteria Scenario-Based Solution Method for Sustainable Reverse Logistics Design of Waste Electrical and Electronic Equipment (WEEE) , 2016 .

[153]  Matthew B. Miles,et al.  Qualitative Data Analysis: An Expanded Sourcebook , 1994 .

[154]  S. Seuring,et al.  Conducting content‐analysis based literature reviews in supply chain management , 2012 .

[155]  F. Lee,et al.  Outsourcing reverse logistics of high-tech manufacturing firms by using a systematic decision-making approach: TFT-LCD sector in Taiwan , 2010 .

[156]  Luk N. Van Wassenhove,et al.  The effect of remanufacturing on procurement decisions for resellers in secondary markets , 2005, Eur. J. Oper. Res..

[157]  Anna Nagurney,et al.  Reverse supply chain management and electronic waste recycling: a multitiered network equilibrium framework for e-cycling , 2005 .

[158]  Saman Hassanzadeh Amin,et al.  A proposed mathematical model for closed-loop network configuration based on product life cycle , 2012 .

[159]  Nezir Aydin,et al.  Stochastic reverse logistics network design for waste of electrical and electronic equipment , 2015 .

[160]  Grit Walther,et al.  Evaluation of sites for the location of WEEE recycling plants in Spain. , 2008, Waste management.

[161]  Irina Maslennikova,et al.  Xerox's Approach to Sustainability , 2000, Interfaces.

[162]  Yang Liu,et al.  Reverse Logistics Network Design of Waste Electrical Appliances , 2014 .

[163]  Saman Hassanzadeh Amin,et al.  A three-stage model for closed-loop supply chain configuration under uncertainty , 2013 .

[164]  Rita Gamberini,et al.  On the integration of planning and environmental impact assessment for a WEEE transportation network—A case study , 2010 .

[165]  A. Pinheiro,et al.  Impactos dos desastres naturais nos sistemas ambiental e socioeconômico: o que faz a diferença? , 2013 .

[166]  Régis Meissonier,et al.  Financial Performance, Environmental Compliance, and Social Outcomes: The three Challenges of Reverse Logistics. Case Study of IBM Montpellier , 2012 .

[167]  Augusto Q. Novais,et al.  An optimization model for the design of a capacitated multi-product reverse logistics network with uncertainty , 2007, Eur. J. Oper. Res..

[168]  George B. Dantzig,et al.  The Truck Dispatching Problem , 1959 .

[169]  Samar K. Mukhopadhyay,et al.  Joint procurement and production decisions in remanufacturing under quality and demand uncertainty , 2009 .

[170]  A. E. C. Mondragon,et al.  Measures for auditing performance and integration in closed‐loop supply chains , 2011 .

[171]  Chad W. Autry,et al.  The challenge of reverse logistics in catalog retailing , 2001 .

[172]  Li-Hsing Shih,et al.  Reverse logistics system planning for recycling electrical appliances and computers in Taiwan , 2001 .

[173]  José Luis González Velarde,et al.  Design of a recovery network for WEEE collection: the case of Galicia, Spain , 2011, J. Oper. Res. Soc..

[174]  Rajesh K. Singh,et al.  A literature review and perspectives in reverse logistics , 2015 .

[175]  Arvind K Nema,et al.  Multi-objective reverse logistics model for integrated computer waste management , 2006, Waste management & research : the journal of the International Solid Wastes and Public Cleansing Association, ISWA.

[176]  Victor R. Prybutok,et al.  Determinants and logistics of e-waste recycling , 2016 .

[177]  Halit Üster,et al.  A closed-loop supply chain network design problem with integrated forward and reverse channel decisions , 2010 .

[178]  A. Keramati,et al.  Factors affecting incentive dependency of residents to participate in e-waste recycling: a case study on adoption of e-waste reverse supply chain in Iran , 2017, Environment, Development and Sustainability.

[179]  Ruth Banomyong,et al.  Design of closed‐loop supply chain and product recovery management for fast‐moving consumer goods , 2010 .

[180]  Aart van Harten,et al.  Business case Roteb: recovery strategies for monitors , 1999 .