Pt/carbon nanofibers electrocatalysts for fuel cells: effect of the support oxidizing treatment

Abstract Different Pt-based electrocatalysts supported on carbon nanofibers and carbon black (Vulcan XC-72R) have been prepared using a polymer-mediated synthesis. The electrocatalysts have been characterized by transmission electron microscopy (TEM), X-ray diffraction (XRD) and cyclic voltammetry. The effect of carbon nanofibers treatment with HNO3 solution on Pt particle size and electroactive area has been analyzed. Highly dispersed Pt with homogeneous particle size and an electroactive area around of 100 m2 g−1 is obtained in raw carbon nanofibers. The oxidizing treatment of the carbon nanofibers produces agglomeration of the platinum nanoparticles and an electroactive area of 53 m2 g−1. Durability studies indicate a decrease of 14% in the electroactive area after 90 h at 1.2 V in 0.5 M H2SO4 for platinum supported on raw carbon nanofibers and Vulcan XC-72R. The electrocatalyst supported on oxidized carbon nanofibers are stable under similar conditions.

[1]  Juan A. Conesa,et al.  Differences between carbon nanofibers produced using Fe and Ni catalysts in a floating catalyst reactor , 2006 .

[2]  J. Dodelet,et al.  Characterization of Pt nanoparticles deposited onto carbon nanotubes grown on carbon paper and evaluation of this electrode for the reduction of oxygen. , 2006, The journal of physical chemistry. B.

[3]  E. Passalacqua,et al.  Physical and morphological characteristics and electrochemical behaviour in PEM fuel cells of PtRu /C catalysts , 2001 .

[4]  B. Warren,et al.  X-Ray Diffraction , 2014 .

[5]  T. R. Ralph,et al.  Catalysis for low temperature fuel cells. Part I: The cathode challenges , 2002 .

[6]  Qin Xin,et al.  Preparation and Characterization of Multiwalled Carbon Nanotube-Supported Platinum for Cathode Catalysts of Direct Methanol Fuel Cells , 2003 .

[7]  Geping Yin,et al.  Durability Study of Pt ∕ C and Pt ∕ CNTs Catalysts under Simulated PEM Fuel Cell Conditions , 2006 .

[8]  Andrew Dicks,et al.  The role of carbon in fuel cells , 2006 .

[9]  R. Jenkins,et al.  Characterization of oxygen-containing surface complexes created on a microporous carbon by air and nitric acid treatment , 1993 .

[10]  Y. Xing,et al.  Polymer-mediated synthesis of highly dispersed Pt nanoparticles on carbon black. , 2005, Langmuir : the ACS journal of surfaces and colloids.

[11]  Bo-Qing Xu,et al.  Electro-catalytic oxidation of CO on Pt catalyst supported on carbon nanotubes pretreated with oxidative acids , 2006 .

[12]  Jinhua Chen,et al.  Electrodeposition of Pt–Ru nanoparticles on carbon nanotubes and their electrocatalytic properties for methanol electrooxidation , 2004 .

[13]  Fangli Yuan,et al.  Preparation and characterization of carbon nanofibers as catalyst support material for PEMFC , 2004 .

[14]  Leong Ming Gan,et al.  Preparation and characterization of platinum-based electrocatalysts on multiwalled carbon nanotubes for proton exchange membrane fuel cells , 2002 .

[15]  L. Nie,et al.  High dispersion and electrocatalytic properties of platinum nanoparticles on graphitic carbon nanofibers (GCNFs). , 2004, Journal of colloid and interface science.

[16]  Robert C. Haddon,et al.  Proton exchange membrane fuel cells with carbon nanotube based electrodes , 2004 .

[17]  K. Hua,et al.  Electrooxidation of methanol on carbon nanotubes supported Pt-Fe alloy electrode , 2006 .

[18]  Siglinda Perathoner,et al.  Electrocatalytic performances of nanostructured platinum–carbon materials , 2005 .

[19]  Marcelo Carmo,et al.  Alternative supports for the preparation of catalysts for low-temperature fuel cells: the use of carbon nanotubes , 2005 .

[20]  J. Fierro,et al.  Functionalization of carbon support and its influence on the electrocatalytic behaviour of Pt/C in H2 and CO electrooxidation , 2006 .

[21]  C. R. Martin,et al.  Metal-Nanocluster-Filled Carbon Nanotubes: Catalytic Properties and Possible Applications in Electrochemical Energy Storage and Production , 1999 .