An ultrasonic assisted extraction method to release heavy metals from untreated sewage sludge samples.

A rapid ultrasound accelerated sequential extraction procedure has been used to develop sequential extraction proposed by BCR protocol (the community Bureau of Reference now the European Union "Measurement and Testing Programme"). The effects of the ultrasonic treatment on the extraction of Cu, Cd, Cr, Pb, Ni and Zn from untreated sewage sludge collected from industrial site of Hyderabad city (Pakistan) were compared with those obtained from conventional sequentional extraction procedure of modified BCR protocol. In BCR method, each extraction steps takes 10h, where as with the use of compromise sonication conditions in ultrasonic bath, steps 1-3 of the sequential extraction (excluding the hydrogen peroxide digestion in step 3, which was not performed with sonication) could be completed in 30, 30 and 30 min, respectively. Extractable Cd, Cr, Pb and Ni contents were obtained by both comparable methodologies were measured by electrothermal atomic absorption spectrometry (ETAAS), while for Cu and Zn Flame atomic absorption spectrometry (FAAS) was used. The validations of both methods were compared by the analysis of certified reference material of soil amended with sewage sludge (BCR 483). According to statistical evaluation of the results, the proposed accelerated extraction method is valid alternative to conventional shaking with much shorter extraction time with p value <0.05. The overall metal recoveries in steps 1-3 (excluding residual step) were 95-100% of those obtained with the conventional BCR protocol, except for Cu extracted (91.6%) as related to indicative values of Cu in BCR 483 obtained in 1-3 steps. The results of the partitioning study of untreated industrial waste water sewage sludge, indicate that more easily mobilized forms (acid exchangeable) were predominant for Cd and Zn, in contrast, the largest amount of Pb and Cr was associated with the iron/manganese oxide and organic matter/sulphide fractions.

[1]  Raskin,et al.  Phytoremediation of metals: using plants to remove pollutants from the environment. , 1997, Current opinion in biotechnology.

[2]  K Ashley,et al.  Ultrasonic extraction and portable anodic stripping voltammetric measurement of lead in paint, dust wipes, soil, and air: an interlaboratory evaluation. , 1999, Journal of environmental monitoring : JEM.

[3]  Wade Mj,et al.  Environmental transformation of toxic metals. , 1993 .

[4]  G. Evans,et al.  Operational Speciation of Cadmium, Copper, Lead and Zinc in the NIST Standard Reference Materials 2710 and 2711 (Montana Soil) by the BCR Sequential Extraction Procedure and Flame Atomic Absorption Spectrometry , 1997 .

[5]  C. Davidson,et al.  Comparison of original and modified BCR sequential extraction procedures for the fractionation of copper, iron, lead, manganese and zinc in soils and sediments , 2003 .

[6]  Herbert Muntau,et al.  Improvement of Analytical Measurements within the BCR-Programme: Single and Sequential Extraction Procedures Applied to Soil and Sediment Analysis , 1993 .

[7]  Ian D. Wilson,et al.  Encyclopedia of separation science , 2000 .

[8]  S. McGrath,et al.  A study of the impacts of Zn and Cu on two rhizobial species in soils of a long-term field experiment , 2000, Plant and Soil.

[9]  I Ipolyi,et al.  Evaluation of performance of time-saving extraction devices in the BCR three-step sequential extraction procedure. , 2002, Journal of environmental monitoring : JEM.

[10]  M. Shepherd,et al.  Effects of past sewage sludge additions on heavy metal availability in light textured soils: implications for crop yields and metal uptakes. , 2003, Environmental pollution.

[11]  Timothy J. Mason,et al.  Sonochemistry : the uses of ultrasound in chemistry , 1990 .

[12]  O Burica,et al.  Total metal concentrations and partitioning of Cd, Cr, Cu, Fe, Ni and Zn in sewage sludge. , 2000, The Science of the total environment.

[13]  I. Lavilla,et al.  Chemical sequential extraction for metal partitioning in environmental solid samples. , 2002, Journal of environmental monitoring : JEM.

[14]  A. Tessier,et al.  Sequential extraction procedure for the speciation of particulate trace metals , 1979 .

[15]  I. Lavilla,et al.  Speeding up of a three-stage sequential extraction method for metal speciation using focused ultrasound , 1998 .

[16]  C. Davidson,et al.  Effect of ultrasonic agitation on the release of copper, iron, manganese and zinc from soil and sediment using the BCR three-stage sequential extraction. , 2001, Journal of environmental monitoring : JEM.

[17]  E. V. Hullebusch,et al.  Comparison of three sequential extraction procedures to describe metal fractionation in anaerobic granular sludges. , 2005, Talanta.

[18]  H Muntau,et al.  Certification of the extractable contents of Cd, Cr, Cu, Ni, Pb and Zn in a freshwater sediment following a collaboratively tested and optimised three-step sequential extraction procedure. , 2001, Journal of environmental monitoring : JEM.

[19]  M. Veber,et al.  Use of the BCR three-step sequential extraction procedure for the study of the partitioning of Cd, Pb and Zn in various soil samples , 2001 .

[20]  C. Cremisini,et al.  Comparison of two sequential extraction procedures for metal fractionation in sediment samples , 1998 .

[21]  J. Morillo,et al.  Comparative study of three sequential extraction procedures for metals in marine sediments , 1998 .

[22]  S. Smith.  Agricultural Recycling of Sewage Sludge and the Environment , 1996 .

[23]  E. Marguí,et al.  Comparison of three-stage sequential extraction and toxicity characteristic leaching tests to evaluate metal mobility in mining wastes , 2004 .

[24]  M. Sevilla,et al.  Study of fractionation and potential mobility of metal in sludge from pyrite mining and affected river sediments: changes in mobility over time and use of artificial ageing as a tool in environmental impact assessment. , 2003, Environmental pollution.