Grain boundary precipitation and segregation in Ni16Cr9Fe model materials

[1]  K. Stiller,et al.  Structure and chemistry of grain boundaries in Ni−16Cr−9Fe model materials , 1995 .

[2]  G. Smith,et al.  Atom probe analysis of interfacial segregation , 1995 .

[3]  David N. Seidman,et al.  Atomic scale studies of solute-atom segregation at grain boundaries: Experiments and simulations☆ , 1994 .

[4]  G. Was,et al.  Microstructural and microchemical mechanisms controlling intergranular stress corrosion cracking in light-water-reactor systems , 1994 .

[5]  D. Blavette,et al.  The tomographic atom probe: A quantitative three‐dimensional nanoanalytical instrument on an atomic scale , 1993 .

[6]  B. Krakauer,et al.  Absolute atomic-scale measurements of the Gibbsian interfacial excess of solute at internal interfaces. , 1993, Physical review. B, Condensed matter.

[7]  L. Lundin,et al.  On the performance of a microchannel plate detector used for atom-probe analysis , 1993 .

[8]  K. Stiller.  Intergranular precipitation in NiCrFe alloys , 1992 .

[9]  G. Smith,et al.  New dimensions in atom probe analysis , 1992 .

[10]  Glen McPherson,et al.  Statistics in Scientific Investigation , 1991 .

[11]  Gary S. Was,et al.  Behavior of grain boundary chemistry and precipitates upon thermal treatment of controlled purity alloy 690 , 1990 .

[12]  C. H. Shen,et al.  A mechanism for hydrogen-induced intergranular stress corrosion cracking in alloy 600 , 1990 .

[13]  F. R. Beckitt,et al.  Factors influencing the thermal stabilisation of alloy 600 tubing against intergranular corrosion , 1990 .

[14]  C. Tsai,et al.  The effects of heat treatment on the sensitization and SCC behavior of INCONEL 600 alloy , 1989 .

[15]  G. C. Allen,et al.  Sensitization of inconel 600. I. Scanning auger and optical microscopy , 1989 .

[16]  G. Was.  Grain-boundary chemistry and intergranular fracture in austenitic nickel-base alloys - a review. , 1989 .

[17]  J. Mansfield,et al.  A quantitative model for the intergranular precipitation of M7X3 and M23,X6 in Ni-16Cr-9Fe-C-B , 1988 .

[18]  H. Andren,et al.  ON ATOM-PROBE ANALYSIS OF CUBIC MX-TYPE CARBIDES AND CARBONITRIDES , 1988 .

[19]  J. Benoit,et al.  Ultrasonic study of the normal — incommensurate — commensurate phase transitions in [N(CH3)4]2ZnCl 4 , 1986 .

[20]  D. Seidman,et al.  Atomic resolution observations of solute-atom segregation effects and phase transitions in stacking faults in dilute cobalt alloys—I. Experimental results , 1985 .

[21]  C. Briant,et al.  The microstructural response of mill-annealed and solution-annealed INCONEL 600 to heat treatment , 1985 .

[22]  G. Was,et al.  A thermodynamic and kinetic basis for understanding chromium depletion in Ni-Cr-Fe alloys , 1985 .

[23]  G. Was,et al.  The influence of thermal treatment on the chemistry and structure of grain boundaries in inconel 600 , 1981 .

[24]  G. Airey.  Microstructural aspects of the thermal treatment of Inconel alloy 600 , 1980 .

[25]  R. C. Scarberry,et al.  Precipitation Reactions in Inconel Alloy 600 and Their Effect on Corrosion Behavior , 1976 .