Single and networked CuO nanowires for highly sensitive p‐type semiconductor gas sensor applications

Development of high-performance p-type semiconductor based gas sensors exhibiting fast-response/recovery times with ultra-high response are of major importance for gas sensing applications. Recent reports demonstrated the excellent properties of p-type semiconducting oxide for various practical applications, especially for selective oxidation of volatile organic compounds (VOCs). In this work, sensors based on CuO nanowire (NW) networks have been successfully fabricated via a simple thermal oxidation process on pre-patterned Au/Cr pads. Our investigation demonstrates high impact of the process temperature on aspect ratio and density of copper oxide NWs. An optimal temperature for growth of thin and densely packed NWs was found to be at 425 degrees C. The fabricated sensors demonstrated ultra-high gas response by a factor of 313 to ethanol vapour (100 ppm) at an operating temperature of 250 degrees C. High stability and repeatability of these sensors indicate the efficiency of p-type oxide based gas sensors for selective detection of VOCs. A high-performance nanodevice was fabricated in a FIB-SEM system using a single CuO NW, demonstrating an ethanol response of 202 and rapid response and recovery of similar to 198 ms at room temperature. The involved gas sensing mechanism of CuO NW networks has been described. We consider that the presented results will be of a great interest for the development of higherperformance p-type semiconductor based sensors and bottomup nanotechnologies. (C) 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim

[1]  Wojtek Wlodarski,et al.  Nanostructured copper oxides as ethanol vapour sensors , 2013 .

[2]  D. Zeng,et al.  Synthesis, growth mechanism and gas-sensing properties of large-scale CuO nanowires , 2010 .

[3]  R. Adelung,et al.  Integration of individual TiO2 nanotube on the chip: Nanodevice for hydrogen sensing , 2015 .

[4]  G. Mutinati,et al.  Suspended CuO nanowires for ppb level H2S sensing in dry and humid atmosphere , 2013 .

[5]  Oleg Lupan,et al.  ighly sensitive and selective hydrogen single-nanowire nanosensor , 2012 .

[6]  N. N. Bulgakov,et al.  Study of the nature of extended defects of copper oxide , 1988 .

[7]  R. Adelung,et al.  Enhanced ethanol vapour sensing performances of copper oxide nanocrystals with mixed phases , 2016 .

[8]  Jae-Hun Kim,et al.  Growth and sensing properties of networked p-CuO nanowires , 2015 .

[9]  A. Umarji,et al.  Gas sensing response analysis of p-type porous chromium oxide thin films , 2013 .

[10]  S. Choopun,et al.  Ethanol sensing properties of CuO nanowires prepared by an oxidation reaction , 2009 .

[11]  Thomas Maier,et al.  Gas Sensing Properties of Novel CuO Nanowire Devices , 2013 .

[12]  R. Adelung,et al.  Three‐Dimensional SnO2 Nanowire Networks for Multifunctional Applications: From High‐Temperature Stretchable Ceramics to Ultraresponsive Sensors , 2015 .

[13]  K. Kim,et al.  Ultra-fast responding and recovering C2H5OH sensors using SnO2 hollow spheres prepared and activated by Ni templates. , 2010, Chemical communications.

[14]  Guodong Li,et al.  Facile synthesis of highly stable and porous Cu2O/CuO cubes with enhanced gas sensing properties , 2013 .

[15]  Peng Zhu,et al.  Formation of CuO nanowires by thermal annealing copper film deposited on Ti/Si substrate , 2011 .

[16]  N. N. Bulgakov,et al.  The structure, energetics, and reactivity of extended defects of copper oxide , 1988 .

[17]  W. Benecke,et al.  Direct Growth of Freestanding ZnO Tetrapod Networks for Multifunctional Applications in Photocatalysis, UV Photodetection, and Gas Sensing. , 2015, ACS applied materials & interfaces.

[18]  Qiaobao Zhang,et al.  Facile large-scale synthesis of vertically aligned CuO nanowires on nickel foam: growth mechanism and remarkable electrochemical performance , 2014 .

[19]  Younan Xia,et al.  One‐Dimensional Nanostructures: Synthesis, Characterization, and Applications , 2003 .

[20]  Elson Longo,et al.  The Role of Hierarchical Morphologies in the Superior Gas Sensing Performance of CuO‐Based Chemiresistors , 2013 .

[21]  Oleg Lupan,et al.  Novel hydrogen gas sensor based on single ZnO nanorod , 2008 .

[22]  Rainer Adelung,et al.  Silver-doped zinc oxide single nanowire multifunctional nanosensor with a significant enhancement in response , 2016 .

[23]  C. Zou,et al.  Large-area aligned CuO nanowires arrays: Synthesis, anomalous ferromagnetic and CO gas sensing properties , 2012 .

[24]  Thorsten Wagner,et al.  Mesoporous materials as gas sensors. , 2013, Chemical Society reviews.

[25]  Ion Tiginyanu,et al.  Selective hydrogen gas nanosensor using individual ZnO nanowire with fast response at room temperature , 2010 .

[26]  C. Lieber,et al.  Nanowire Nanosensors for Highly Sensitive and Selective Detection of Biological and Chemical Species , 2001, Science.

[27]  R. Adelung,et al.  Versatile Growth of Freestanding Orthorhombic α-Molybdenum Trioxide Nano- and Microstructures by Rapid Thermal Processing for Gas Nanosensors , 2014 .

[28]  Sebastian Wille,et al.  Rapid Fabrication Technique for Interpenetrated ZnO Nanotetrapod Networks for Fast UV Sensors , 2014, Advanced materials.

[29]  Leonardo C. Campos,et al.  On the growth and electrical characterization of CuO nanowires by thermal oxidation , 2009 .

[30]  S. Akbar,et al.  Highly sensitive and ultra-fast responding gas sensors using self-assembled hierarchical SnO2 spheres , 2009 .

[31]  Seong‐Hyeon Hong,et al.  H2 and C2H5OH sensing characteristics of mesoporous p-type CuO films prepared via a novel precursor-based ink solution route , 2013 .