Energy harvesting from vibration with cross-linked polypropylene piezoelectrets

Piezoelectret films are prepared by modification of the microstructure of polypropylene foam sheets cross-linked by electronic irradiation (IXPP), followed by proper corona charging. Young’s modulus, relative permittivity, and electromechanical coupling coefficient of the fabricated films, determined by dielectric resonance spectra, are about 0.7 MPa, 1.6, and 0.08, respectively. Dynamic piezoelectric d33 coefficients up to 650 pC/N at 200 Hz are achieved. The figure of merit (FOM, d33 ⋅ g33) for a more typical d33 value of 400 pC/N is about 11.2 GPa−1. Vibration-based energy harvesting with one-layer and two-layer stacks of these films is investigated at various frequencies and load resistances. At an optimum load resistance of 9 MΩ and a resonance frequency of 800 Hz, a maximum output power of 120 μW, referred to the acceleration g due to gravity, is obtained for an energy harvester consisting of a one-layer IXPP film with an area of 3.14 cm2 and a seismic mass of 33.7 g. The output power can be further...

[1]  Gerhard M. Sessler,et al.  Piezoelectric d33 coefficient of cellular polypropylene subjected to expansion by pressure treatment , 2004 .

[2]  Xunlin Qiu,et al.  Patterned piezo-, pyro-, and ferroelectricity of poled polymer electrets , 2010 .

[3]  Yoshinori Iguchi,et al.  Trench-filled cellular parylene electret for piezoelectric transducer , 2012 .

[4]  Alper Erturk,et al.  Piezoelectret foam–based vibration energy harvesting , 2014 .

[5]  Jan M. Rabaey,et al.  A study of low level vibrations as a power source for wireless sensor nodes , 2003, Comput. Commun..

[6]  Jaehwan Kim,et al.  A review of piezoelectric energy harvesting based on vibration , 2011 .

[7]  Ruy Alberto Pisani Altafim,et al.  Template-based fluoroethylenepropylene piezoelectrets with tubular channels for transducer applications , 2009 .

[8]  Jukka Lekkala,et al.  Large and broadband piezoelectricity in smart polymer-foam space-charge electrets , 2000 .

[9]  Xiaoqing Zhang,et al.  Fluoroethylenepropylene ferroelectret films with cross-tunnel structure for piezoelectric transducers and micro energy harvesters , 2014 .

[10]  Daniel J. Inman,et al.  Energy Harvesting Technologies , 2008 .

[11]  Gerhard M. Sessler,et al.  Piezoelectricity in cellular electret films , 2000 .

[12]  G. Sessler,et al.  Ferroelectrets: Soft Electroactive Foams for Transducers , 2004 .

[13]  Xiaoqing Zhang,et al.  Piezoelectric properties of irradiation-crosslinked polypropylene ferroelectrets , 2007 .

[14]  Joachim Bös,et al.  Vibration-based energy harvesting with stacked piezoelectrets , 2014 .

[15]  Xiaoqing Zhang,et al.  Low‐Cost, Large‐Area, Stretchable Piezoelectric Films Based on Irradiation‐Crosslinked Poly(propylene) , 2014 .

[16]  Gerhard M. Sessler,et al.  Electromechanical response of cellular electret films , 1999 .

[17]  Xiaoqing Zhang,et al.  Ferroelectrets with improved thermal stability made from fused fluorocarbon layers , 2007 .

[18]  Christopher R. Bowen,et al.  Piezoelectric and ferroelectric materials and structures for energy harvesting applications , 2014 .

[19]  Dibin Zhu,et al.  Energy harvesting study on single and multilayer ferroelectret foams under compressive force , 2015, IEEE Transactions on Dielectrics and Electrical Insulation.

[20]  Werner Wirges,et al.  Controlled inflation of voids in cellular polymer ferroelectrets: Optimizing electromechanical transducer properties , 2004 .

[21]  Gerhard M. Sessler,et al.  Figure of merit of piezoelectret transducers for pulse-echo or transmit-receive systems for airborne ultrasound , 2013 .

[22]  Axel Mellinger,et al.  Dielectric resonance spectroscopy: a versatile tool in the quest for better piezoelectric polymers , 2003 .

[23]  H. Seggern,et al.  Breakdown-induced polarization buildup in porous fluoropolymer sandwiches: a thermally stable piezoelectret , 2006 .

[24]  Tobias Melz,et al.  Energy harvesting with single-layer and stacked piezoelectret films , 2015, IEEE Transactions on Dielectrics and Electrical Insulation.

[25]  Xiaoqing Zhang,et al.  Energy harvesting from vibration using flexible floroethylenepropylene piezoelectret films with cross-tunnel structure , 2015, IEEE Transactions on Dielectrics and Electrical Insulation.

[26]  S. Bauer,et al.  Piezo-, pyro- and ferroelectrets: soft transducer materials for electromechanical energy conversion , 2006, IEEE Transactions on Dielectrics and Electrical Insulation.

[27]  J. Hillenbrand,et al.  Quasistatic and dynamic piezoelectric coefficients of polymer foams and polymer film systems , 2004, IEEE Transactions on Dielectrics and Electrical Insulation.

[28]  Timothy C. Green,et al.  Energy Harvesting From Human and Machine Motion for Wireless Electronic Devices , 2008, Proceedings of the IEEE.

[29]  Reimund Gerhard-Multhaupt,et al.  Less can be more. Holes in polymers lead to a new paradigm of piezoelectric materials for electret transducers , 2002 .

[30]  M. Paajanen,et al.  Electromechanical modeling and properties of the electret film EMFI , 2001 .

[31]  R. Kressmann,et al.  Linear and nonlinear piezoelectric response of charged cellular polypropylene , 2001 .