Field-scale application of a semi-analytical model for estimation of CO2 and brine leakage along old wells

Abstract Carbon capture and geological storage (CCS) operations will require an environmental risk analysis to determine, among other things, the risk that injected CO 2 or displaced brine will leak from the injection formation into other parts of the subsurface or surface environments. Such an analysis requires site characterization including identification of potential leakage pathways. In North America, the century-long legacy of oil and gas exploration and production has left millions of oil and gas wells, many of which are co-located with otherwise good geological storage sites. Potential leakage along existing wells, coupled with layered stratigraphic sequences and highly uncertain parameters, makes quantitative analysis of leakage risk a significant computational challenge. However, new approaches to modeling CO 2 injection, migration, and leakage allow for realistic scenarios to be simulated within a probabilistic framework. Using a specific field site in Alberta, Canada, we perform a range of computational studies aimed at risk analysis with a focus on CO 2 and brine leakage along old wells. The specific calculations focus on the injection period, when risk of leakage is expected to be largest. Specifically, we simulate 50 years of injection of supercritical CO 2 and use a Monte Carlo framework to analyze the overall system behavior. The simulations involve injection, migration, and leakage over the 50-year time horizon for domains of several thousand square kilometers having multiple layers in the sedimentary succession and several thousand old wells within the domain. Because we can perform each simulation in a few minutes of computer time, we can run tens of thousands of simulations and analyze the outputs in a probabilistic framework. We use these kinds of simulations to demonstrate the importance of residual brine saturations, the range of current options to quantify leaky well properties, and the impact of depth of injection and how it relates to leakage risk.

[1]  Michael A. Celia,et al.  Spatial characterization of the location of potentially leaky wells penetrating a deep saline aquifer in a mature sedimentary basin , 2004 .

[2]  Dmitri Kavetski,et al.  Model for CO2 leakage including multiple geological layers and multiple leaky wells. , 2009, Environmental science & technology.

[3]  Curtis M. Oldenburg,et al.  Screening and ranking framework for geologic CO2 storage site selection on the basis of health, safety, and environmental risk , 2008 .

[4]  C. Tsang,et al.  A method for quick assessment of CO2 storage capacity in closed and semi-closed saline formations , 2008 .

[5]  S Pacala,et al.  Stabilization Wedges: Solving the Climate Problem for the Next 50 Years with Current Technologies , 2004, Science.

[6]  Jan M. Nordbotten,et al.  Injection and Storage of CO2 in Deep Saline Aquifers: Analytical Solution for CO2 Plume Evolution During Injection , 2005 .

[7]  S. Bachu,et al.  Evaluation of the Potential for Gas and CO2 Leakage Along Wellbores , 2009 .

[8]  B. E. Buschkuehle,et al.  Comprehensive Characterization of a Potential Site for CO2 Geological Storage in Central Alberta, Canada , 2009 .

[9]  Robert H. Socolow,et al.  Sustaining fossil fuel use in a carbon‐constrained world by rapid commercialization of carbon capture and sequestration , 2007 .

[10]  C. Tsang,et al.  Large-scale impact of CO2 storage in deep saline aquifers: A sensitivity study on pressure response in stratified systems , 2009 .

[11]  B. Metz.  IPCC special report on carbon dioxide capture and storage , 2005 .

[12]  Karsten Pruess,et al.  Formation dry‐out from CO2 injection into saline aquifers: 2. Analytical model for salt precipitation , 2009 .

[13]  Hari S Viswanathan,et al.  A system model for geologic sequestration of carbon dioxide. , 2009, Environmental science & technology.

[14]  Hamdi A. Tchelepi,et al.  Gravity currents with residual trapping , 2008, Journal of Fluid Mechanics.

[15]  Michael A. Celia,et al.  Assessing the potential for CO2 leakage, particularly through wells, from geological storage sites , 2013 .

[16]  Michael A. Celia,et al.  Wellbore integrity analysis of a natural CO2 producer , 2009 .

[17]  Alv-Arne Grimstad,et al.  Modelling and Simulation of Mechanisms for Leakage of CO2 from Geological Storage , 2009 .

[18]  Carl W. Gable,et al.  Numerical Simulation of CO2 Leakage through Abandoned Wells: Model for an Abandoned Site with Observed Gas Migration in Alberta, Canada , 2009 .

[19]  Karsten Pruess,et al.  Formation dry‐out from CO2 injection into saline aquifers: 1. Effects of solids precipitation and their mitigation , 2009 .

[20]  Stefan Bachu,et al.  Drainage and Imbibition Relative Permeability Relationships for Supercritical CO2/Brine and H2S/Brine Systems in Intergranular Sandstone, Carbonate, Shale, and Anhydrite Rocks , 2008 .

[21]  John G. Kaldi,et al.  CO2 storage in saline aquifers I-Current state of scientific knowledge , 2009 .

[22]  Jan M. Nordbotten,et al.  An improved analytical solution for interface upconing around a well , 2006 .

[23]  Sandeep Sharma,et al.  CO2 storage in saline aquifers II–Experience from existing storage operations , 2009 .

[24]  Jan M Nordbotten,et al.  Practical Modeling Approaches for Geological Storage of Carbon Dioxide , 2009, Ground water.

[25]  Theresa L. Watson,et al.  Identification of Wells With High CO2-Leakage Potential in Mature Oil Fields Developed for CO2-Enhanced Oil Recovery , 2008 .

[26]  Rainer Helmig,et al.  Investigations on CO2 storage capacity in saline aquifers: Part 1. Dimensional analysis of flow processes and reservoir characteristics , 2009 .

[27]  Hamdi A. Tchelepi,et al.  Gravity currents in horizontal porous layers: transition from early to late self-similarity , 2007, Journal of Fluid Mechanics.

[28]  Gregory Schnaar,et al.  Computational Modeling of the Geologic Sequestration of Carbon Dioxide , 2009 .

[29]  J. M. Nordbotten,et al.  Upslope plume migration and implications for geological CO2 sequestration in deep, saline aquifers , 2008 .

[30]  Paul Hardisty,et al.  Screening and selection of sites for CO2 sequestration based on pressure buildup , 2009 .

[31]  Jan M. Nordbotten,et al.  How simple can we make models for CO2 injection, migration, and leakage? , 2011 .

[32]  Stefan Bachu,et al.  Semianalytical solution for CO2 leakage through an abandoned well. , 2005, Environmental science & technology.

[33]  Jan M. Nordbotten,et al.  Similarity solutions for fluid injection into confined aquifers , 2006, Journal of Fluid Mechanics.

[34]  Bruce Hunt,et al.  Flow to a Well in a Multiaquifer System , 1985 .

[35]  M. Celia,et al.  Analytical solutions for leakage rates through abandoned wells , 2004 .

[36]  Daniel M. Tartakovsky,et al.  Abrupt-Interface Solution for Carbon Dioxide Injection into Porous Media , 2009 .

[37]  Ruben Juanes,et al.  A simple but rigorous model for calculating CO2 storage capacity in deep saline aquifers at the basin scale , 2009 .

[38]  Jan M. Nordbotten,et al.  Risk of Leakage versus Depth of Injection in Geological Storage , 2009 .

[39]  Robert W. Zimmerman,et al.  Approximate Solutions for Pressure Buildup During CO2 Injection in Brine Aquifers , 2009 .