Relief Bragg reflectors inscribed on the capillary walls of solid‐core photonic crystal fibers

The inscription of relief Bragg grating reflectors on the capillary walls of a solid-core photonic crystal fiber (PCF) using laser radiation is presented. The inscription method followed is based on the infiltration and adsorption of a thin layer of toluene on the capillaries of the PCF and the subsequent exposure of the infiltrated fiber using 248-nm excimer laser radiation and phase mask interference. Gratings are characterized spectrally and by scanning electron microscopy while their sensing capabilities are exemplified by infiltrating them with organic solvents. Thermal studies revealed that the gratings exhibit high thermal endurance characteristics, withstanding tens of hours annealing at 950°C.

[1]  T. Strasser,et al.  Grating resonances in air-silica microstructured optical fibers. , 1999, Optics letters.

[2]  A. Samoc,et al.  Dispersion of refractive properties of solvents: Chloroform, toluene, benzene, and carbon disulfide in ultraviolet, visible, and near-infrared , 2003 .

[3]  E Buckley,et al.  Bragg gratings in air-silica structured fibers. , 2003, Optics letters.

[4]  Costas Fotakis,et al.  Dynamics of ripple formation on silicon surfaces by ultrashort laser pulses in subablation conditions , 2012 .

[5]  R. Brüning.  On the glass transition in vitreous silica by differential thermal analysis measurements , 2003 .

[6]  J. Jensen,et al.  Photonic crystal fiber long-period gratings for biochemical sensing. , 2006, Optics express.

[7]  Elsa Garmire,et al.  Comparison between the matrix method and the coupled-wave method in the analysis of Bragg reflector structures , 1992 .

[8]  Peter Wasserscheid,et al.  Ultra-low concentration monitoring of catalytic reactions in photonic crystal fiber. , 2012, Chemistry.

[9]  H. Niino,et al.  Surface micro-fabrication of silica glass by excimer laser irradiation of organic solvent , 2003 .

[10]  Klaus Zimmer,et al.  Laser etching of fused silica using an adsorbed toluene layer , 2004 .

[11]  K. Zimmer,et al.  Sub-micron periodic structuring of sapphire by laser induced backside wet etching technique. , 2007, Optics express.

[12]  R. Brückner,et al.  Properties and structure of vitreous silica. I , 1970 .

[13]  S. Pissadakis.  Laser processing of optical fibers: new photosensitivity findings, refractive index engineering and surface structuring , 2012 .

[14]  Jun Wang,et al.  Micromachining of transparent materials with super-heated liquid generated by multiphotonic absorption of organic molecule , 2000 .

[15]  Stavros Pissadakis,et al.  Investigations on the Bragg grating recording in all-silica, standard and microstructured optical fibers using 248 nm 5 ps, laser radiation , 2009 .

[16]  K. Hill,et al.  Photosensitivity in optical fiber waveguides: Application to reflection filter fabrication , 1978 .

[17]  Jacques Albert,et al.  Grating formation in pure silica-core fibers. , 2002, Optics letters.

[18]  S. Georgiou,et al.  Laser-induced material ejection from model molecular solids and liquids: mechanisms, implications, and applications. , 2003, Chemical reviews.

[19]  W. Margulis,et al.  A spectrally tunable microstructured optical fibre Bragg grating utilizing an infiltrated ferrofluid. , 2010, Optics express.

[21]  Klaus Zimmer,et al.  Analytical solution of the laser-induced temperature distribution across internal material interfaces , 2009 .

[22]  T A Birks,et al.  Structural long-period gratings in photonic crystal fibers. , 2002, Optics letters.

[23]  Hiroshi Masuhara,et al.  THE 248 NM EXCIMER LASER ABLATION OF LIQUID BENZENE DERIVATIVES : A RELATION BETWEEN ABLATION THRESHOLD AND MOLECULAR PHOTOCHEMICAL REACTIVITY , 1994 .