Effect of Al source and alkali activation on Pb and Cu immobilisation in fly-ash based “geopolymers”

Abstract Solidification/stabilisation technologies are attracting great interest from mining and energy industries alike, to solve their pressing waste disposal problems. “Geopolymers”, in particular, are becoming one of the more popular solidification/stabilisation methods since they can be applied to a variety of waste sources at low cost, yielding added-value products. However, the effect of Al source on the solidification/stabilisation of heavy metals within fly ash-based Geopolymers, has received little attention. This study examines the effect of variable Al source and alkali-activator on the final properties of fly ash-based Geopolymers as characterised by compressive strength testing, infrared and X-ray diffraction analyses. Leaching tests were performed to determine the efficiencies of Pb and Cu immobilisation, which were compared to the initial properties of the Al source (e.g. particle size, cation exchange capacity, total extractable cation concentration and suspension yield stress). It was observed that Pb was generally better immobilised than Cu. In addition, the total extractable cation concentration of the Al source greatly affected the efficiency of Pb immobilisation while the physical properties of the Al source (suspension yield stress and eventual compressive strength) determined the efficiencies of Cu immobilisation. For both metals, NaOH activation was the most favourable method for metal immobilisation, however, a clear mechanism of adsorption remains elusive.

[1]  B. Scheetz,et al.  Giga-scale disposal: a real frontier for ceramic research , 1999 .

[2]  Gerard P.J. Dijkema,et al.  A new paradigm for waste management , 2000 .

[3]  J. Phair,et al.  Effect of silicate activator pH on the leaching and material characteristics of waste-based inorganic polymers , 2001 .

[4]  J. C. Swanepoel,et al.  Utilisation of fly ash in a geopolymeric material , 2002 .

[5]  Hilary I. Inyang,et al.  Utilization of waste materials in civil engineering construction : proceedings of sessions sponsored by the Materials Engineering Division of the American Society of Civil Engineers in conjunction with the ASCE National Convention, New York, New York, September 13-17, 1992 , 1992 .

[6]  J.S.J. van Deventer,et al.  Effect of the Alkali Metal Activator on the Properties of Fly Ash-Based Geopolymers , 1999 .

[7]  R. D. Kretser,et al.  Surface chemistry-rheology inter-relationships in clay suspensions , 1998 .

[8]  Morton A. Barlaz,et al.  Life-cycle inventory of a modern municipal solid waste landfill , 1999 .

[9]  J. Phair,et al.  Effect of the silicate activator pH on the microstructural characteristics of waste-based geopolymers , 2002 .

[10]  Jesse R. Conner,et al.  Chemical fixation and solidification of hazardous wastes , 1990 .

[11]  E. Merz,et al.  Immobilization of intermediate-level wastes in geopolymers , 1994 .

[12]  G. C. Lukey,et al.  Effect of Alkali Metals on the Preferential Geopolymerization of Stilbite/Kaolinite Mixtures , 2001 .

[13]  David L. Cocke,et al.  Properties of fly‐ash bricks produced for environmental applications , 1995 .

[14]  J.S.J. van Deventer,et al.  The potential use of geopolymeric materials to immobilise toxic metals: Part II. Material and leaching characteristics , 1999 .

[15]  Hua Xu,et al.  Ab Initio Calculations on the Five-membered Alumino-silicate Framework Rings Model: Implications for Dissolution in Alkaline Solutions , 2000, Comput. Chem..

[16]  D. Cocke,et al.  An FTIR and XPS investigations of the effects of carbonation on the solidification/stabilization of cement based systems-Portland type V with zinc , 1993 .

[17]  J. Phair,et al.  Interaction of sodium silicate with zirconia and its consequences for polysialation , 2001 .

[18]  D. Cocke,et al.  An FTIR investigation of cement based solidification/stabilization systems doped with cadmium , 1992 .

[19]  J. Davidovits,et al.  Geopolymeric concretes For Environmental Protection , 1990 .

[20]  F. P. Glasser,et al.  Chemically-bonded cementitious materials based on metakaolin , 1992 .

[21]  J. W. P. and,et al.  Characterization of Fly-Ash-Based Geopolymeric Binders Activated with Sodium Aluminate , 2002 .

[22]  J.S.J. van Deventer,et al.  Factors affecting the immobilization of metals in geopolymerized flyash , 1998 .

[23]  J. Deventer,et al.  The geopolymerisation of alumino-silicate minerals , 2000 .

[24]  J. Davidovits.  Geopolymers : inorganic polymeric new materials , 1991 .

[25]  J.S.J. van Deventer,et al.  The potential use of geopolymeric materials to immobilise toxic metals: Part I. Theory and applications☆ , 1997 .