A 2.5 kV Isolation 35 kV/us CMR 250 Mbps Digital Isolator in Standard CMOS With a Small Transformer Driving Technique

A small-size on-chip transformer-based digital isolator for power control systems is proposed. With a proposed pulse generation and detection scheme that enables a 5 V standard CMOS transistor to utilize GHz-band signals, transformer area is reduced to 1/4-1/8 that of conventional transformers. A test chip achieves a 2.5 kV isolation voltage, a 35 kV/us CMR, a 1.6 mA static current and a 250 Mbps data rate, all which are equal to or superior to those of optocouplers or conventional digital isolators. The developed technology greatly reduces the number of chips in power control systems by allowing integration of multiple isolators in a CMOS chip together with microcontrollers or gate drivers. Moreover, the high-speed low-power capability expands the application potential to include isolated serial links, controller area network (CAN), FlexRay, medical devices, displays, sensors, etc.

[1]  Baoxing Chen,et al.  Fully integrated isolated dc-dc converter using micro-transformers , 2008, 2008 Twenty-Third Annual IEEE Applied Power Electronics Conference and Exposition.

[2]  Tadahiro Kuroda,et al.  A 0.14pJ/b Inductive-Coupling Inter-Chip Data Transceiver with Digitally-Controlled Precise Pulse Shaping , 2007, 2007 IEEE International Solid-State Circuits Conference. Digest of Technical Papers.

[3]  Baoxing Chen,et al.  Isolated half-bridge gate driver with integrated high-side supply , 2008, 2008 IEEE Power Electronics Specialists Conference.

[4]  Cyril Condemine,et al.  A ±1.5% nonlinearity 0.1-to-100A shunt current sensor based on a 6kV isolated micro-transformer for electrical vehicles and home automation , 2011, 2011 IEEE International Solid-State Circuits Conference.

[5]  K. S. Rajashekara,et al.  Gate drive methods for IGBTs in bridge configurations , 1994, Proceedings of 1994 IEEE Industry Applications Society Annual Meeting.

[6]  K. Taniguchi,et al.  PWM technique for power MOSFET inverter , 1988 .

[7]  S. A. Rawls,et al.  A MONOLITHIC SIGNAL ISOLATOR , 1989 .

[8]  Baoxing Chen,et al.  High Speed Digital Isolators Using Microscale On-Chip Transformers , 2003 .

[9]  G. Knoedl,et al.  A monolithic signal isolator (for power convertors) , 1989, Proceedings, Fourth Annual IEEE Applied Power Electronics Conference and Exposition.

[10]  Duncan A. Grant,et al.  A New High-Quality PWM AC Drive , 1983, IEEE Transactions on Industry Applications.

[11]  Jean-Christophe Crebier,et al.  Design and Realization of Highly Integrated Isolated DC/DC Microconverter , 2011, IEEE Transactions on Industry Applications.

[12]  T. Sakurai,et al.  A High-Speed Inductive-Coupling Link With Burst Transmission , 2009, IEEE Journal of Solid-State Circuits.

[13]  R. Kliger,et al.  Integrated transformer-coupled isolation , 2003, IEEE Instrumentation & Measurement Magazine.

[14]  E. Motto,et al.  A Monolithic 500V, 1A Three Phase Motor Driver with Small Line Surface Mount Package , 2007, 2007 IEEE Industry Applications Annual Meeting.

[15]  M. Stecher,et al.  Key technologies for system-integration in the automotive and Industrial Applications , 2005, IEEE Transactions on Power Electronics.

[16]  M. Munzer,et al.  Insulated signal transfer in a half bridge driver IC based on coreless transformer technology , 2003, The Fifth International Conference on Power Electronics and Drive Systems, 2003. PEDS 2003..