Wall-Propelled, In-Tube Propulsion with Repetitive-Pulse Laser Ablation

Proof-of-principle experiments of in-tube propulsion in which the propellant was supplied from the launch tube wall were conducted. The launch tube had a 25 mm × 25 mm square inner cross-section. A pair of opposing launch tube walls were made of polyacetal (POM), which was ablated using repetitive Transeversely-Excited Atmospheric (TEA) CO2 laser pulses. The laser beam was sent through a ZnSe window at the tube bottom to the symmetric parabolic surfaces of the projectile, and focused onto the ablator surfaces. The momentum coupling coefficient was measured from a vertical launch trajectory. When the breech of the launch tube was plugged, a momentum coupling coefficient of 4 mN-s/J at least was obtained. Even when the breech was connected to a vacuum chamber at a pressure lower than 20 Pa, the projectile could be vertically launched with a constant momentum coupling coefficient of 0.14 mN-s/J, the value of which was the same order as that obtained by directly irradiating a laser pulse onto a POM ablator.