Dental materials: 1991 literature review.
暂无分享,去创建一个
J. McCabe | C. Lloyd | J. Nicholson | E. Combe | R. van Noort | R. Curtis | D. Brown | R. Clarke | A. M. Fletcher | P. Marquis | J. Mccabe
[1] C. B. Ponton,et al. Microstructural characterization of hydroxyapatite coating on titanium , 1992 .
[2] R. Gatchel. Dealing with Discomfort Managing Anxiety and Pain During Dental Treatment , 1992 .
[3] M. J. Song,et al. Transmission electron microscopic and high voltage electron microscopic observations of the bone and osteocyte activity adjacent to unloaded dental implants placed in dogs. , 1992, Journal of periodontology.
[4] Cox Cf,et al. Reparative dentin: factors affecting its deposition. , 1992 .
[5] M. J. Song,et al. High-voltage electron microscopy and conventional transmission electron microscopy of the interface zone between bone and endosteal dental implants. , 1992, Journal of biomedical materials research.
[6] D Buser,et al. Light and Transmission Electron Microscopy of the Intact Interfaces Between Non-submerged Titanium-coated Epoxy Resin Implants and Bone or Gingiva , 1992, Journal of dental research.
[7] L Pröbster,et al. Slip-casting alumina ceramics for crown and bridge restorations. , 1992, Quintessence international.
[8] J B Brunski,et al. Biomechanical factors affecting the bone-dental implant interface. , 1992, Clinical materials.
[9] A. Fenton. The role of dental implants in the future. , 1992, Journal of the American Dental Association.
[10] D. Setchell,et al. Properties of the tray adhesive of an addition polymerizing silicone to impression tray materials. , 1991, The Journal of prosthetic dentistry.
[11] G. Schuster,et al. Ultraconservative sealed restorations: three-year results. , 1991, Journal of public health dentistry.
[12] S. Şahmalı,et al. Systemic effects of nickel-containing dental alloys: analysis of nickel levels in serum, liver, kidney, and oral mucosa of guinea pigs. , 1991, Quintessence international.
[13] G. Oilo,et al. Fracture toughness measurements of some dental core ceramics: a methodologic study. , 1991, Scandinavian journal of dental research.
[14] A. Peutzfeldt,et al. Influence of Carboxylic Anhydrides on Selected Mechanical Properties of Heat-cured Resin Composites , 1991, Journal of dental research.
[15] G H Johnson,et al. Marginal adaptation of castable ceramic crowns. , 1991, The Journal of prosthetic dentistry.
[16] S. Seltzer,et al. A new glass ionomer root canal sealer. , 1991, Journal of endodontics.
[17] J R Bednar,et al. A comparative study of frictional forces between orthodontic brackets and arch wires. , 1991, American journal of orthodontics and dentofacial orthopedics : official publication of the American Association of Orthodontists, its constituent societies, and the American Board of Orthodontics.
[18] H. Goodis,et al. In vitro evaluation of an hydroxyapatite root canal system filling material. , 1991, Journal of endodontics.
[19] G. Soh,et al. Defects in automixed addition silicone elastomers prepared by putty-wash impression technique. , 1991, Journal of oral rehabilitation.
[20] B. Willershausen,et al. Root canal sealer cytotoxicity on human gingival fibroblasts: 2. Silicone- and resin-based sealers. , 1991, Journal of endodontics.
[21] T. Hamada,et al. Corrosion properties of soldered joints. Part II: Corrosion pattern of dental solder and dental nickel-chromium alloy. , 1991, The Journal of prosthetic dentistry.
[22] W. Kalk,et al. A study of acrylic resin denture base material distortion using computer-aided holographic interferometry. , 1991, The International journal of prosthodontics.
[23] I. Hayakawa,et al. Adhesion of a new light-polymerized denture base resin to resin teeth and denture base materials. , 1991, The International journal of prosthodontics.
[24] L. Watanabe,et al. Effects of clinical recycling on mechanical properties of nickel-titanium alloy wires. , 1991, American journal of orthodontics and dentofacial orthopedics : official publication of the American Association of Orthodontists, its constituent societies, and the American Board of Orthodontics.
[25] L. Breeding,et al. Dimensional changes of processed denture bases after relining with three resins. , 1991, The Journal of prosthetic dentistry.
[26] J. Bohácek,et al. Long-term sealing ability of a calcium hydroxide sealer. , 1991, Journal of endodontics.
[27] W. Malone,et al. The effect of oxidation heat treatment of porcelain bond strength in selected base metal alloys. , 1991, The Journal of prosthetic dentistry.
[28] G. M. Smith,et al. Effect of impression tray design and impression technique upon the accuracy of stone casts produced from a putty-wash polyvinyl siloxane impression material. , 1991, Journal of dentistry.
[29] S. Roth. A laboratory study of glass ionomer cement as a retrograde root-filling material. , 1991, Australian dental journal.
[30] D C Watts,et al. Determination of polymerization shrinkage kinetics in visible-light-cured materials: methods development. , 1991, Dental materials : official publication of the Academy of Dental Materials.
[31] F. Vahidi,et al. Evaluation of marginal adaptation of all-ceramic crowns and metal ceramic crowns. , 1991, The Journal of prosthetic dentistry.
[32] E. Asmussen,et al. Marginal adaptation of a restorative resin polymerized at reduced rate. , 1991, Scandinavian journal of dental research.
[33] G. Stookey,et al. Use of an in vitro model to assess the effects of APF gel treatment on the staining potential of dental porcelain. , 1991, Dental materials : official publication of the Academy of Dental Materials.
[34] A. Hruska,et al. Quality criteria for pure titanium casting, laboratory soldering, intraoral welding, and a device to aid in making uncontaminated castings. , 1991, The Journal of prosthetic dentistry.
[35] C. Drago. Tarnish and corrosion with the use of intraoral magnets. , 1991, The Journal of prosthetic dentistry.
[36] J. Jandinski,et al. Evaluation of three silicone-based materials as potential retrograde fillings in surgical endodontics. , 1991, Journal of endodontics.
[37] R. R. Prososki,et al. Static frictional force and surface roughness of nickel-titanium arch wires. , 1991, American journal of orthodontics and dentofacial orthopedics : official publication of the American Association of Orthodontists, its constituent societies, and the American Board of Orthodontics.
[38] P. Abbott,et al. A comparative study of the apical leakage of four root canal sealers and laterally condensed gutta-percha. , 1991, Journal of endodontics.
[39] B. Mohlin,et al. Examination of Chinese NiTi wire by a combined clinical and laboratory approach. , 1991, European journal of orthodontics.
[40] D. E. Hooper,et al. Mercury from dental "silver" tooth fillings impairs sheep kidney function. , 1991, The American journal of physiology.
[41] R. Simonsen,et al. Retention and effectiveness of dental sealant after 15 years. , 1991, Journal of the American Dental Association.
[42] M. Pharoah,et al. The Effect of Partial Coating with Hydroxyapatite on Bone Remodeling in Relation to Porous-coated Titanium-alloy Dental Implants in the Dog , 1991, Journal of dental research.
[43] R. Kerby,et al. Physical Properties of Stainless-steel and Silver-reinforced Glass-ionomer Cements , 1991, Journal of dental research.
[44] G. Graser,et al. Dimensional accuracy of denture resin cured by microwave energy. , 1991, The Journal of prosthetic dentistry.
[45] A. H. Tjan,et al. Effects of strain rate on the behavior of elastomeric impression. , 1991, The Journal of prosthetic dentistry.
[46] T. Watson,et al. The adaptation and sealing ability of light-cured glass ionomer retrograde root fillings. , 1991, International endodontic journal.
[47] G. Willems,et al. The Surface Roughness of Enamel-to-Enamel Contact Areas Compared with the Intrinsic Roughness of Dental Resin Composites , 1991, Journal of dental research.
[48] L. Spångberg,et al. Toxicity of Pulpispad using four different cell types. , 1991, International endodontic journal.
[49] J. Chai,et al. Adhesive properties of several impression material systems: Part II. , 1991, The Journal of prosthetic dentistry.
[50] M. Braden,et al. Heterocyclic methacrylates for clinical applications. I. Mechanical properties. , 1991, Biomaterials.
[51] G. Pearson,et al. Long-term flexural strength of glass ionomer cements. , 1991, Biomaterials.
[52] M. Braden,et al. Heterocyclic methacrylates for clinical applications. II. Room temperature polymerizing systems for potential clinical use. , 1991, Biomaterials.
[53] G. Christensen. Microfills vs. hybrids. Is there a universal composite resin? , 1991, Journal of the American Dental Association.
[54] M. Chapko. Time to adoption of an innovation by dentists in private practice: sealant utilization. , 1991, Journal of public health dentistry.
[55] E. K. Hansen,et al. Influence of the Solubility Parameter of Intermediary Resin on the Effectiveness of the Gluma Bonding System , 1991, Journal of dental research.
[56] G. Kaplowitz. Evaluation of the ability of essential oils to dissolve gutta-percha. , 1991, Journal of endodontics.
[57] R. Kusy. Nitinol alloys: so, who's on first? , 1991, American journal of orthodontics and dentofacial orthopedics : official publication of the American Association of Orthodontists, its constituent societies, and the American Board of Orthodontics.
[58] M. Braden,et al. Heterocyclic methacrylates for clinical applications. III. Water absorption characteristics. , 1991, Biomaterials.
[59] J. Powers,et al. In vitro properties of light-polymerized reline materials. , 1991, The International journal of prosthodontics.
[60] W. Lang,et al. Educating dentists about fissure sealants: effects on knowledge, attitudes, and use. , 1991, Journal of public health dentistry.
[61] D. Watts,et al. Kinetic measurements of photo-polymerization contraction in resins and composites , 1991 .
[62] Roulet Jf,et al. Criteria for substituting amalgam with composite resins. , 1991 .
[63] L. J. Brown. Dental amalgam. Designs for research in human populations. , 1991, Journal of the American Dental Association.
[64] W V Campagni,et al. An accelerated technique for casting post and core restorations. , 1991, The Journal of prosthetic dentistry.
[65] F. Rueggeberg,et al. Color changes in post-cure heat-treated resin composites. , 1991, American journal of dentistry.
[66] R. Jagger,et al. Effect of the curing cycle on acrylic denture base glass transition temperatures. , 1991, Journal of dentistry.
[67] S. Inoue,et al. A 24-week study of the microleakage of four retrofilling materials using a fluid filtration method. , 1991, Journal of endodontics.
[68] K. Safavi,et al. Tissue reaction to endodontic materials: methods, criteria, assessment, and observations. , 1991, Oral surgery, oral medicine, and oral pathology.
[69] A. Zissis,et al. Measurement methods used for the determination of dimensional accuracy and stability of denture base materials. , 1991, Journal of dentistry.
[70] J. R. Mackert. Dental amalgam and mercury. , 1991, Journal of the American Dental Association.
[71] G. Graser,et al. Porosity of denture resin cured by microwave energy. , 1991, The Journal of prosthetic dentistry.
[72] V. Sobarzo-Navarro. Clinical experience in root canal obturation by an injection thermoplasticized gutta-percha technique. , 1991, Journal of endodontics.
[73] R. Macsween,et al. Peel bond strengths of five impression material tray adhesives. , 1991, Journal.
[74] N. Barghi,et al. Effect of fitting adjustments on compressive strength of a new foil crown system. , 1991, The Journal of prosthetic dentistry.
[75] I. Mandel. Amalgam hazards. An assessment of research. , 1991, Journal of the American Dental Association.
[76] M. Rosen,et al. Disinfection of alginate impression material using disinfectants as mixing and soak solutions. , 1991, Journal of dentistry.
[77] L Baum,et al. Marginal accuracy of complete crowns made from alternative casting alloys. , 1991, The Journal of prosthetic dentistry.
[78] J Middleton,et al. A Finite Element Study of Canine Retraction with a Palatal Spring , 1991, British journal of orthodontics.
[79] J. D. Duncan. Prevention of catalyst contamination of vinylpolysiloxane silicone impression material during the impression procedure. , 1991, The Journal of prosthetic dentistry.
[80] T. Goshima,et al. Optimum radiopacity of composite inlay materials and cements. , 1991, Oral surgery, oral medicine, and oral pathology.
[81] J. Jansen,et al. Histologic evaluation of the osseous adaptation to titanium and hydroxyapatite-coated titanium implants. , 1991, Journal of biomedical materials research.
[82] A. C. Guastaldi,et al. Metallurgical evaluation of a copper-based alloy for dental castings. , 1991, Quintessence international.
[83] W. Rock,et al. Forces Produced by Auxiliary Torquing Springs in the Begg Technique , 1991, British journal of orthodontics.
[84] B. Crispin,et al. Effect of porcelain crown substructures on visually perceivable value. , 1991, The Journal of prosthetic dentistry.
[85] J. Sandrik,et al. Wettability of elastomeric impression materials and voids in gypsum casts. , 1991, The Journal of prosthetic dentistry.
[86] E. Asmussen,et al. Distortion of impression materials used in the double-mix technique. , 1991, Scandinavian journal of dental research.
[87] F. Mcdonald,et al. Effect of bracket and wire composition on frictional forces. , 1991, European journal of orthodontics.
[88] M. Raadal,et al. A two-year clinical trial comparing the retention of two fissure sealants. , 1991, International journal of paediatric dentistry.
[89] T. Gerzina,et al. Comparison of amalgam behaviour under static and cyclic sub-modulus of rupture loading. , 1991, Journal of oral rehabilitation.
[90] R J Simonsen,et al. New materials on the horizon. , 1991, Journal of the American Dental Association.
[91] J. M. Davis,et al. A comparative study between visible-light-activated and autopolymerizing sealants in relation to retention. , 1991, ASDC journal of dentistry for children.
[92] G. B. Pelleu,et al. Halothane and eucalyptol as alternatives to chloroform for softening gutta-percha. , 1991, Journal of endodontics.
[93] R. Seghi,et al. Relative color stability of ceramic stains subjected to glazing temperatures. , 1991, The Journal of prosthetic dentistry.
[94] A. Harrison,et al. The effect of thermocycling on the hardness of soft lining materials. , 1991, Quintessence international.
[95] S. Bayne,et al. Effects of air polishing on the abrasion of occlusal sealants. , 1991, Quintessence international.
[96] C. E. Brown,et al. The comparative antimicrobial effect of calcium hydroxide. , 1991, Oral surgery, oral medicine, and oral pathology.
[97] R. Yukna. Clinical comparison of hydroxyapatite-coated titanium dental implants placed in fresh extraction sockets and healed sites. , 1991, Journal of periodontology.
[98] J. Kivilahti,et al. Testing of metal-ceramic joint using scanning acoustic microscopy. , 1991, Dental materials : official publication of the Academy of Dental Materials.
[99] C J Burstone,et al. Patterns of initial tooth displacements associated with various root lengths and alveolar bone heights. , 1991, American journal of orthodontics and dentofacial orthopedics : official publication of the American Association of Orthodontists, its constituent societies, and the American Board of Orthodontics.
[100] L. Atzori,et al. Development of Low- and High-serum Culture Conditions for Use of Human Oral Fibroblasts in Toxicity Testing of Dental Materials , 1991, Journal of dental research.
[101] E. Sutow,et al. Crevice Corrosion Products of Dental Amalgam , 1991, Journal of dental research.
[102] D Buser,et al. Influence of surface characteristics on bone integration of titanium implants. A histomorphometric study in miniature pigs. , 1991, Journal of biomedical materials research.
[103] R. Weller,et al. In vitro intracanal temperatures produced by low- and high-temperature thermoplasticized injectable Gutta-percha. , 1991, Journal of endodontics.
[104] H. Shintani,et al. Residual monomers (TEGDMA and Bis-GMA) of a set visible-light-cured dental composite resin when immersed in water. , 1991, Journal of oral rehabilitation.
[105] C. Groh,et al. Sources of color variation on firing porcelain. , 1991, Dental materials : official publication of the Academy of Dental Materials.
[106] H. Fukui,et al. Fatigue Properties of Dental Wrought Gold Alloys , 1991 .
[107] G. Soh,et al. Effect of interchanging automatic mixing tips on void formation for an automixed addition silicone impression. , 1991, American journal of dentistry.
[108] J. Howlett,et al. Acrylic denture distortion following double processing with microwaves or heat. , 1991, Journal of dentistry.
[109] F. Isidor,et al. Marginal fit of porcelain and indirect composite laminate veneers under in vitro conditions. , 1991, Scandinavian journal of dental research.
[110] M. Rosen,et al. Influence of mixing disinfectant solutions into alginate on working time and accuracy. , 1991, Journal of dentistry.
[111] C. Johansson,et al. Area ratio effects on metal ion release from amalgam in contact with gold. , 1991, Scandinavian journal of dental research.
[112] I. Mjör,et al. Incidence of adverse effects of dental materials. , 1991, Scandinavian journal of dental research.
[113] R. Weller,et al. A comparison of thermoplasticized injectable gutta-percha obturation techniques. , 1991, Journal of endodontics.
[114] N. Wilson,et al. Five-year findings of a multiclinical trial for a posterior composite. , 1991, Journal of dentistry.
[115] A. Aydın. Evaluation of finishing and polishing techniques on surface roughness of chromium-cobalt castings. , 1991, The Journal of prosthetic dentistry.
[116] R J Cook,et al. Response of the oral mucosa to denture wearing. , 1991, Journal of dentistry.
[117] B. Hojjatie,et al. Effect of Thermal Tempering on Strength and Crack Propagation Behavior of Feldspathic Porcelains , 1991, Journal of dental research.
[118] O. Makinson,et al. Replacement of low copper amalgams by a group of general dental practitioners. , 1991, Australian dental journal.
[119] P. Kelly,et al. Tin oxide coating of aluminous porcelain by reactive ion plating. , 1991, Journal of dentistry.
[120] G. Eliades,et al. Corrosion pattern of silver points in vivo. , 1991, Journal of endodontics.
[121] W. Foong,et al. Hamster Cheek-pouch Testing of Dental Soft Polymers , 1991, Journal of dental research.
[122] N. Ruse,et al. Adhesion to Bovine Dentin-Surface Characterization , 1991, Journal of dental research.
[123] B R Lang,et al. Determination of the accuracy of three die systems. , 1991, The Journal of prosthetic dentistry.
[124] R G Craig,et al. The Release of Elements of Dental Casting Alloys into Cell-culture Medium , 1991, Journal of dental research.
[125] R. Sydiskis,et al. Impression materials and virus. , 1991, Journal of the American Dental Association.
[126] E. Sutow,et al. An in vivo and in vitro Study of the Loss of Plasticizer from Soft Polymer-gel Materials , 1991, Journal of dental research.
[127] L. Spångberg,et al. Silver glass ionomer cement as a retrograde filling material: a study in vitro. , 1991, Journal of endodontics.
[128] D A Garlapo,et al. Spectrophotometric analysis of a nongreening, metal-fusing porcelain. , 1991, The Journal of prosthetic dentistry.
[129] C. S. Teo,et al. Porosities in five automixed addition silicone elastomers. , 1991, Operative dentistry.
[130] D. W. Jones,et al. Chemical and Molecular Weight Analyses of Prosthodontic Soft Polymers , 1991, Journal of dental research.
[131] G. B. Pelleu,et al. Effects of an internal escape channel on a castable ceramic crown. , 1991, The Journal of prosthetic dentistry.
[132] G. Christensen. The dental implant dilemma. , 1991, Journal of the American Dental Association.
[133] B Melsen,et al. Material parameters and stress profiles within the periodontal ligament. , 1991, American journal of orthodontics and dentofacial orthopedics : official publication of the American Association of Orthodontists, its constituent societies, and the American Board of Orthodontics.
[134] J. Sorensen. Improved seating of ceramic inlays with a silicone fit-checking medium. , 1991, The Journal of prosthetic dentistry.
[135] I. Mandel. Living with amalgam: an environmental perspective. , 1991, Quintessence international.
[136] G. Eliades,et al. Porosity of pit and fissure sealants. , 1991, Journal of oral rehabilitation.
[137] W. Barkmeier,et al. Shear bond strength of Dicor using resin adhesive systems and light activated cement. , 1991, Journal of esthetic dentistry.
[138] E. L. DaBreo,et al. A new method of measuring dimensional change. , 1991, The Journal of prosthetic dentistry.
[139] M. L. Hicks,et al. Effectiveness of halothane used with ultrasonic or hand instrumentation to remove gutta-percha from the root canal. , 1991, Journal of endodontics.
[140] R. Cronin,et al. Effect of metal design and technique on the marginal characteristics of the collarless metal ceramic restoration. , 1991, The Journal of prosthetic dentistry.
[141] D. Watts,et al. Current status and rationale for composite inlays and onlays , 1991, British Dental Journal.
[142] K. Wakasa,et al. Tensile behaviour in 30Ni-30Cu-40Mn-based alloys for a dental application , 1991 .
[143] Tulinius Av,et al. Dental amalgam--the possible contribution to mercury burden in Greenland Inuit. , 1991 .
[144] A. Holmlund,et al. Apicectomy: a comparative clinical study of amalgam and glass ionomer cement as apical sealants. , 1991, Oral surgery, oral medicine, and oral pathology.
[145] M. Kern,et al. The all-porcelain, resin-bonded bridge. , 1991, Quintessence international.
[146] D. W. Jones,et al. Gel strength and rate of gelation of soft polymers. , 1991, Dental materials : official publication of the Academy of Dental Materials.
[147] F. Barbakow,et al. Quality and durability of marginal adaptation in bonded composite restorations. , 1991, Dental materials : official publication of the Academy of Dental Materials.
[148] H. Messer,et al. [Adhesion of sealer cements to dentin with and without smear layer]. , 1991, Endodoncia.
[149] J. Drummond,et al. Physiological aging of an all-ceramic restorative material. , 1991, Dental materials : official publication of the Academy of Dental Materials.
[150] W. Sneed,et al. Microhardness of Class II composite resin restorations with different matrices and light positions. , 1991, The Journal of prosthetic dentistry.
[151] J. Powers,et al. Spreading of oligomers on polymers. , 1991, Dental materials : official publication of the Academy of Dental Materials.
[152] M. Faulkner,et al. On the use of vertical loops in retraction systems. , 1991, American journal of orthodontics and dentofacial orthopedics : official publication of the American Association of Orthodontists, its constituent societies, and the American Board of Orthodontics.
[153] K. Söderholm,et al. Variables influencing the repair strength of dental composites. , 1991, Scandinavian journal of dental research.
[154] G. Ravnholt,et al. Corrosion investigation of two materials for implant supraconstructions coupled to a titanium implant. , 1991, Scandinavian journal of dental research.
[155] C J Burstone,et al. Centers of rotation with transverse forces: an experimental study. , 1991, American journal of orthodontics and dentofacial orthopedics : official publication of the American Association of Orthodontists, its constituent societies, and the American Board of Orthodontics.
[156] J. Antonucci,et al. Filler systems based on calcium metaphosphates. , 1991, Dental materials : official publication of the Academy of Dental Materials.
[157] L. Breeding,et al. The curing potential of light-activated composite resin luting agents. , 1991, The Journal of prosthetic dentistry.
[158] S. Weiner,et al. Effects of temperature on color stability of porcelain stains. , 1991, The Journal of prosthetic dentistry.
[159] K. Söderholm. Correlation of in vivo and in vitro performance of adhesive restorative materials: a report of the ASC MD156 Task Group on Test Methods for the Adhesion of Restorative Materials. , 1991, Dental materials : official publication of the Academy of Dental Materials.
[160] K. Michi,et al. Histologic findings of apatite-titanium complex dental implants in the jaws of dogs. , 1991, Oral surgery, oral medicine, and oral pathology.
[161] K. Itoh,et al. Marginal adaptation of nine commercial intermediate resins. , 1991, Dental materials : official publication of the Academy of Dental Materials.
[162] A. Caputo,et al. Reuse of silver-palladium ceramic metal. , 1991, The Journal of prosthetic dentistry.
[163] A. Tveit,et al. Radiopacity of restorations and detection of secondary caries. , 1991, Dental materials : official publication of the Academy of Dental Materials.
[164] E. Davis,et al. Scanning electron microscopic and energy dispersive x-ray evaluation of two smear layer-mediated dentinal bonding agents. , 1991, Quintessence international.
[165] R. Fournelle,et al. Bending properties of superelastic and nonsuperelastic nickel-titanium orthodontic wires. , 1991, American journal of orthodontics and dentofacial orthopedics : official publication of the American Association of Orthodontists, its constituent societies, and the American Board of Orthodontics.
[166] J A Sorensen,et al. Porcelain-composite interface microleakage with various porcelain surface treatments. , 1991, Dental materials : official publication of the Academy of Dental Materials.
[167] P. Städtler. Dental amalgam. III: Toxicity. , 1991, International journal of clinical pharmacology, therapy, and toxicology.
[168] J. Rudney,et al. Dimensional stability of a polyvinylsiloxane impression material following ethylene oxide and steam autoclave sterilization. , 1991, The Journal of prosthetic dentistry.
[169] J. Cunningham,et al. Sorption determination of hollow VLC resin obturators. , 1991, Journal of dentistry.
[170] N. Wilson,et al. Performance of occlusin in butt-joint and bevel-edged preparations: five-year results. 4. , 1991, Dental materials : official publication of the Academy of Dental Materials.
[171] R. Elderton,et al. Bonding dental amalgam to a light-curing glass-ionomer liner/base , 1991, British Dental Journal.
[172] J. McCabe,et al. The 5-year results of a clinical trial comparing a glass polyalkenoate (ionomer) cement restoration with an amalgam restoration , 1991, British Dental Journal.
[173] R B Price,et al. The dimensional accuracy of 12 impression material and die stone combinations. , 1991, The International journal of prosthodontics.
[174] W. Johnston,et al. Color consistency, plaque accumulation, and external marginal surface characteristics of the collarless metal-ceramic restoration. , 1991, The Journal of prosthetic dentistry.
[175] R. Caffesse,et al. Periodontium response to a root canal condensing device (Endotec). , 1991, Oral surgery, oral medicine, and oral pathology.
[176] C M Kreulen,et al. Wear measurements in clinical studies of composite resin restorations in the posterior region: a review. , 1991, ASDC journal of dentistry for children.
[177] R. Rada. Intraoral repair of metal ceramic restorations. , 1991, The Journal of prosthetic dentistry.
[178] S. Rosenstiel,et al. Abrasion of Human Enamel by Different Dental Ceramics in vitro , 1991, Journal of dental research.
[179] A. Schulman,et al. A compressive strength study of complete ceramic crowns. Part II. , 1991, The Journal of prosthetic dentistry.
[180] D. W. Jones,et al. Clinical implications of resilient denture lining material research. Part II: Gelation and flow properties of tissue conditioners. , 1991, The Journal of prosthetic dentistry.
[181] C. Rice,et al. Microbial contamination in four brands of irreversible hydrocolloid impression materials. , 1991, The Journal of prosthetic dentistry.
[182] T. Maruyama,et al. Clinical use of a new castable glass ceramic material. , 1991, The International journal of prosthodontics.
[183] B. Levin,et al. Comparison of the adaptation of acrylic resin cured by microwave energy and conventional water bath. , 1991, Quintessence international.
[184] K. Pässler,et al. Ion release from Ni-Cr-Mo and Co-Cr-Mo casting alloys. , 1991, The International journal of prosthodontics.
[185] S. Skerfving,et al. Status of mercury and selenium in dental personnel: impact of amalgam work and own fillings. , 1991, Archives of environmental health.
[186] E. Saunders,et al. The effect of post space preparation on the apical seal of root fillings using chemically adhesive materials. , 1991, International endodontic journal.
[187] A. Johnston,et al. Dentin-bonding Molar Efficiency Using N-Phenylglycine, N-Phenyl-beta-Alanine, or N-Methyl-N-Phenylglycine , 1991, Journal of dental research.
[188] C. Chew,et al. Thermal effect on the dissolution of mercury from two dental amalgams. , 1991, Journal of oral rehabilitation.
[189] R. Seghi,et al. Effect of different metal ceramic alloys on the color of opaque and dentin porcelain. , 1991, The Journal of prosthetic dentistry.
[190] Wendt Sl. Microleakage and cusp fracture resistance of heat-treated composite resin inlays. , 1991 .
[191] J. Ph,et al. The current status of composite materials and adhesive systems. 6: Techniques for indirect placement. , 1991 .
[192] T. Casselman,et al. Planning a delayed burnout. , 1991, The Journal of prosthetic dentistry.
[193] K. Nakata,et al. Lack of correlation between the amount of eugenol released from zinc oxide-eugenol sealer and cytotoxicity of the sealer. , 1991, Journal of endodontics.
[194] N. Barghi,et al. Dimensional changes in casting titanium removable partial denture frameworks. , 1991, The Journal of prosthetic dentistry.
[195] C. Shen,et al. Influence of Initial Flaw Size on Crack Growth in Air-tempered Porcelain , 1991, Journal of dental research.
[196] K R Kotwal,et al. Changes in vertical dimension of occlusion in conventional and microwave processing of complete dentures. , 1991, The Journal of prosthetic dentistry.
[197] W. Douglas,et al. Fissure sealant wear at 30 months: new evaluation criteria. , 1991, Journal of dentistry.
[198] R. I. Holland. Use of potentiodynamic polarization technique for corrosion testing of dental alloys. , 1991, Scandinavian journal of dental research.
[199] W. Gillette,et al. Titanium endosseous implant-soft tissue interface: a literature review. , 1991, Journal of periodontology.
[200] M. Waarli,et al. Effect of vacuum and supertemperature on mold filling during casting. , 1991, Scandinavian journal of dental research.
[201] I A Hammad,et al. A qualitative study for the bond and color of ceramometals. Part II. , 1991, The Journal of prosthetic dentistry.
[202] Y. Papadogianis,et al. Surface hardness of light-cured and self-cured composite resins. , 1991, The Journal of prosthetic dentistry.
[203] D. H. Pratten,et al. Detail reproduction of soft tissue: a comparison of impression materials. , 1991, The Journal of prosthetic dentistry.
[204] G. B. Pelleu,et al. Wear of human enamel against a commercial castable ceramic restorative material. , 1991, The Journal of prosthetic dentistry.
[205] L. Samaranayake,et al. Carriage of oral flora on irreversible hydrocolloid and elastomeric impression materials. , 1991, The Journal of prosthetic dentistry.
[206] C. Goodacre,et al. Microleakage and shear bond strength of resin and porcelain veneers bonded to cast alloys. , 1991, The Journal of prosthetic dentistry.
[207] G. Schuster,et al. Sealed restorations: 4-year results. , 1991, American journal of dentistry.
[208] G. Powell,et al. Degree of composite resin polymerization with visible light and argon laser. , 1991, American journal of dentistry.
[209] G. Mattison,et al. An in vitro investigation of the apical seal produced by a new thermoplasticized gutta-percha obturation technique. , 1991, Quintessence international.
[210] A. Waikakul,et al. Clinical study of retrograde filling with gold leaf: comparison with amalgam. , 1991, Oral surgery, oral medicine, and oral pathology.
[211] M. Andrée,et al. More mercury from crematoria , 1991, Nature.
[212] Y. Okamoto,et al. Liquid gallium alloys for metallic plastic fillings , 1991, British Dental Journal.
[213] S. Mitra. Adhesion to Dentin and Physical Properties of a Light-cured Glass-ionomer Liner/Base , 1991, Journal of dental research.
[214] S. Mitra. In vitro Fluoride Release from a Light-cured Glass-ionomer Liner/Base , 1991, Journal of dentistry research.
[215] N. Nakabayashi,et al. Effect of 2-(Methacryloxy)ethyl Phenyl Hydrogen Phosphate on Adhesion to Dentin , 1991, Journal of dental research.
[216] A. Peutzfeldt,et al. [Color stability of three composite resins used in the inlay/onlay technique]. , 1990, Tandlaegebladet.
[217] J. Ferracane,et al. Cytotoxicity of amalgams, alloys, and their elements and phases. , 1988, Dental materials : official publication of the Academy of Dental Materials.
[218] K. Wakasa,et al. A modified dental cast investment for nickel base alloy: a preliminary study , 1991 .
[219] D. Wood,et al. Structure-property relationships in ionomer glasses , 1991 .
[220] J. Nicholson,et al. Studies on the setting chemistry of glass-ionomer cements , 1991 .
[221] Herbert Scha¨ffer. Determination of the etching surface of metal frameworks in resin-bonded prostheses , 1991 .
[222] B. Ellis,et al. Fibrous reinforcement of glass-ionomer cements , 1991 .
[223] E. Angelini,et al. In vitro corrosion of some Co-Cr and Ni-Cr alloys used for removable partial dentures: influence of heat treatments , 1991 .
[224] D. Wood,et al. Preliminary Studies on Castable Apatite-Mullite Glass-Ceramics , 1991 .
[225] Alan D. Wilson,et al. A study of the cements formed between metal oxides and polyvinylphosphonic acid , 1991 .
[226] Gerlach Rw,et al. Managing sealant utilization among insured populations: report from Vermont's "Tooth Fairy" program. , 1991 .
[227] Messer Lb,et al. Sealant use by general practitioners: a Minnesota survey. , 1991 .
[228] Handelman Sl. Therapeutic use of sealants for incipient or early carious lesions in children and young adults. , 1991 .
[229] Foreman Fj,et al. Retention of sealants placed by dental technicians without assistance. , 1991 .
[230] G. Caughman,et al. Effects of denture base resins on oral epithelial cells. , 1991, The International journal of prosthodontics.
[231] I. Brook,et al. Initial in-vivo evaluation of glass-ionomer cements for use as alveolar bone substitutes. , 1991, Clinical materials.
[232] D Revel,et al. Dental materials and magnetic resonance imaging. , 1991, Investigative radiology.
[233] E. Asmussen,et al. Effect of 2-hydroxyethyl methacrylate in an Al2Ox3/glycine solution used as primer for dentin bonding. , 1991, Acta odontologica Scandinavica.
[234] W. Barkmeier,et al. Dentinal bond strengths and microleakage of a 4-META adhesive to amalgam and composite resin. , 1991, Quintessence international.
[235] G. Pearson. Physical properties of glass-ionomer cements influencing clinical performance. , 1991, Clinical materials.
[236] S. Bayne,et al. Effect of air abrasives on marginal configurations of porcelain-fused-to-metal alloys: an SEM analysis. , 1991, The Journal of prosthetic dentistry.
[237] G. Vougiouklakis,et al. Surface alterations on dental restorative materials subjected to an air-powder abrasive instrument. , 1991, The Journal of prosthetic dentistry.
[238] W. Douglas,et al. Effect of a new resin inlay/onlay restorative material on cuspal reinforcement. , 1991, Quintessence international.
[239] T. Prihoda,et al. Surface detail reproduction of Type IV dental stones with selected polyvinyl siloxane impression materials. , 1991, Quintessence international.
[240] C. Gottlieb,et al. A clinical pathologic study of four adult cases of acute mercury inhalation toxicity. , 1991, Archives of pathology & laboratory medicine.
[241] P. Holmstrup,et al. Reactions of the oral mucosa related to silver amalgam: a review. , 1991, Journal of oral pathology & medicine : official publication of the International Association of Oral Pathologists and the American Academy of Oral Pathology.
[242] M. Bergman,et al. Corrosion and strength of dental low-gold brazing materials. , 1991, Swedish dental journal.
[243] E. Asmussen,et al. Effect on bonding of curing through dentin. , 1991, Acta odontologica Scandinavica.
[244] John William Nicholson,et al. Glass-ionomer cements in orthopaedic surgery: design of laboratory tests. , 1991, Clinical Materials.
[245] J. Nicholls,et al. Load fatigue of teeth restored by a dentin bonding agent and a posterior composite resin. , 1991, The Journal of prosthetic dentistry.
[246] D. Ranly,et al. Effect of dentin adhesives on sealant bond strength. , 1991, The Journal of clinical pediatric dentistry.
[247] K. Asaoka,et al. Visco-elastic deformation of dental porcelain and porcelain-metal compatibility. , 1991, Dental Materials.
[248] J. Mclean. The clinical use of glass-ionomer cements--future and current developments. , 1991, Clinical materials.
[249] C. W. Berry,et al. Comparison of antimicrobial and cytotoxic effects of glutaraldehyde and formocresol. , 1991, Oral surgery, oral medicine, and oral pathology.
[250] John William Nicholson,et al. The biocompatibility of glass-poly(alkenoate) (Glass-Ionomer) cements: a review. , 1991, Journal of biomaterials science. Polymer edition.
[251] P. Doherty. Biocompatibility evaluation of glass ionomer cement using cell culture techniques. , 1991, Clinical materials.
[252] F. Rueggeberg. Substrate for adhesion testing to tooth structure - review of the literature. , 1991, Dental materials : official publication of the Academy of Dental Materials.
[253] C. Göthe,et al. Biological monitoring of environmental and occupational exposure to mercury , 1991, International archives of occupational and environmental health.
[254] E. Combe,et al. Effects of glass composition and pretreatment on the reactivity of novel glass polyalkenoate (glass ionomers) dental cements. , 1991, Clinical materials.
[255] T. Dérand,et al. Stress analysis of cemented or resin-bonded loaded porcelain inlays. , 1991, Dental materials : official publication of the Academy of Dental Materials.
[256] A. D. Wilson,et al. The glass polyphosphonate cement: a novel glass-ionomer cement based on poly(vinyl phosphonic acid). , 1991, Clinical materials.
[257] H. Herø,et al. Effects of In and Zn on properties of low noble metal alloys. , 1991, Biomaterials.
[258] A. Jokstad. Influence of cavity depth on marginal degradation of amalgam restorations. , 1991, Acta odontologica Scandinavica.
[259] H. Forss,et al. Resistance of occlusal fissures to demineralization after loss of glass ionomer sealants in vitro. , 1991, Pediatric dentistry.
[260] J. Nicholson,et al. A study of the relationship between setting chemistry and properties of modified glass-poly(alkenoate) cements , 1990 .
[261] G. Bell,et al. Evaluation of analytical techniques for measurement of denture-base acrylic resin glass-transition temperature. , 1990, Dental materials : official publication of the Academy of Dental Materials.
[262] D Drescher,et al. Frictional forces between bracket and arch wire. , 1989, American journal of orthodontics and dentofacial orthopedics : official publication of the American Association of Orthodontists, its constituent societies, and the American Board of Orthodontics.
[263] D C Tidy,et al. Frictional forces in fixed appliances. , 1989, American journal of orthodontics and dentofacial orthopedics : official publication of the American Association of Orthodontists, its constituent societies, and the American Board of Orthodontics.
[264] R. Phillips,et al. Adaptation of acrylic resin dentures as influenced by the activation mode of polymerization. , 1989, Journal of the American Dental Association.
[265] H. Tsuchiya,et al. In Vitro Comparison of Cone Beam Computed Tomography with Digital Periapical Radiography for Detection of Vertical Root Fracture in Posterior Teeth. , 1989 .
[266] M. Braden,et al. Water absorption of methacrylate soft lining materials. , 1989, Biomaterials.
[267] H. Kimura,et al. Application of microwave for dental technique (part 2). Adaptability of cured acrylic resins. , 1984, The Journal of Osaka University Dental School.