Experimental Investigation of Chevron Concentrically Braced Frames with Yielding Beams

AbstractSteel concentrically braced frames designed prior to the implementation of capacity design principles in seismic design provisions may exhibit poor inelastic response under seismic excitation. These older, nonductile concentrically braced frames (NCBFs) used several configurations, with the chevron configuration being one of the most common. The response of chevron-configured NCBFs is unknown, as relatively large axial and flexural demands are imposed on the beam after brace buckling. Current code requirements for special concentrically braced frames (SCBFs) promote full yielding of the braces while the beam remains elastic, but NCBFs develop a mechanism in which the beam yields, deforms plastically, and limits tensile elongation of the brace. However, if ductile, this plastic mechanism may meet current performance limits and not require retrofitting. To examine this issue, four tests of two-story NCBFs were conducted at the National Center for Research on Earthquake Engineering in Taipei, Taiwan....