The Thermodynamic Continuum of Jet Engine Performance: The Principle of Lost Work due to Irreversibility in Aerospace Systems

The performance continuum for air-breathing engines is formally developed and illustrated in terms of fundamental thermodynamic quantities including heat and work interactions and the irreversibility occurring in the flow-path of the engine. The thermodynamically consistent base-line from which performance losses due to irreversibility must be measured is clearly defined based on this analysis. Issues and problems with conventional flow availability (flow exergy) in terms of the assessment (design and optimization) of jet engines are discussed. The formal analytical relationship between lost thrust work and the irreversible generation of entropy in a jet engine is then reviewed in terms of underlying principle and methodology used to quantify this lost thrust work. This relationship is then extended based on the same underlying principle to the more general concept of lost thermodynamic work across a jet engine. It is then proposed that this concept of lost thermodynamic work as measured between the actual and the reversible device (rather than as referenced to a thermodynamic dead state) can, in fact, be extended to encompass other sub-systems and ultimately can be applied across the overall aerospace vehicle.

[1]  Bryce Roth.  A work potential perspective of engine component performance , 2001 .

[2]  David W. Riggins,et al.  High-speed engine/component performance assessment using exergy and thrust-based methods , 1996 .

[3]  J. H. Lewis.  Propulsive efficiency from an energy utilization standpoint , 1976 .

[4]  Charles R. Mcclinton,et al.  Thrust Losses in Hypersonic Engines Part 1: Methodology , 1997 .

[5]  R. Haywood.  A critical review of the theorems of thermodynamic availability, with concise formulations. II - Irreversibility , 1974 .

[6]  Dimitri N. Mavris,et al.  A COMPARISON OF THERMODYNAMIC LOSS MODELS SUITABLE FOR GAS TURBINE PROPULSION : THEORY AND TAXONOMY Bryce , 2000 .

[7]  E. T. Curran,et al.  The Use of Stream Thrust Concepts for the Approximate Evaluation of Hypersonic Ramjet Engine Performance , 1973 .

[8]  Howard Brilliant.  Second law analysis of present and future turbine engines , 1995 .

[9]  Dimitri N. Mavris,et al.  A COMPARISON OF THERMODYNAMIC LOSS MODELS APPLIED TO THE J-79 TURBOJET ENGINE , 2000 .

[10]  David W. Riggins,et al.  Evaluation of Performance Loss Methods for High-Speed Engines and Engine Components , 1997 .

[11]  Paul A. Czysz,et al.  Energy analysis of high-speed flight systems , 1991 .

[12]  D. Riggins,et al.  Brayton cycle engine/component performance assessment using energy and thrust-based methods , 1996 .

[13]  C. Builder,et al.  On the thermodynamic spectrum of airbreathing propulsion , 1964 .

[14]  David Moorhouse.  The vision and need for energy-based design methods , 2000 .

[15]  J. H. Horlock,et al.  Availability and Propulsion , 1975 .

[16]  E. T. Curran,et al.  Basic Performance Assessment of Scram Combustors , 2001 .

[17]  Michael R. von Spakovsky,et al.  A Decomposition Strategy Applied to the Optimal Synthesis/Design and Operation of an Advanced Fighter Aircraft System: A Comparison With and Without Airframe Degrees of Freedom , 2003 .