Evaluation of controlled cooling for seeded batch crystallization incorporating dissolution

[1]  Zoltan K. Nagy,et al.  Internal Fines Removal Using Population Balance Model Based Control of Crystal Size Distribution under Dissolution, Growth and Nucleation Mechanisms , 2011 .

[2]  Paul M.J. Van den Hof,et al.  A comparison of nonlinear observers for output feedback model-based control of seeded batch crystallization processes , 2011 .

[3]  Z. Nagy,et al.  Evaluation of the Effect of Seed Preparation Method on the Product Crystal Size Distribution for Batch Cooling Crystallization Processes , 2010 .

[4]  Michael J. Grant,et al.  Particle Swarm Optimization Toolbox , 2010 .

[5]  Z. Nagy,et al.  Seeded Batch Cooling Crystallization with Temperature Cycling for the Control of Size Uniformity and Polymorphic Purity of Sulfathiazole Crystals , 2009 .

[6]  Seeded batch crystallization of ammonium aluminum sulfate from aqueous solution , 2009 .

[7]  Timothy C. Frank,et al.  Use of a Fiber-Optic Turbidity Probe to Monitor and Control Commercial-Scale Unseeded Batch Crystallizations , 2009 .

[8]  Z. Nagy,et al.  Adaptive concentration control of cooling and antisolvent crystallization with laser backscattering measurement , 2009 .

[9]  Jeffrey D. Ward,et al.  Population balance modeling in Simulink: PCSS , 2008, Comput. Chem. Eng..

[10]  Z. Nagy,et al.  Comparative performance of concentration and temperature controlled batch crystallizations , 2008 .

[11]  Jia Wei Chew,et al.  Automated In-line Technique Using FBRM to Achieve Consistent Product Quality in Cooling Crystallization , 2007 .

[12]  J. Chew,et al.  Comparison between Open-Loop Temperature Control and Closed-Loop Supersaturation Control for Cooling Crystallization of Glycine , 2007 .

[13]  J. D. Ward,et al.  Choosing an operating policy for seeded batch crystallization , 2006 .

[14]  C. Porte,et al.  Effect of seeded surface area on crystal size distribution in glycine batch cooling crystallization: a seeding methodology , 2004 .

[15]  N. Kubota,et al.  Process Control of Seeded Batch Cooling Crystallization of the Metastable α-Form Glycine Using an In-Situ ATR-FTIR Spectrometer and an In-Situ FBRM Particle Counter , 2004 .

[16]  Richard D. Braatz,et al.  Open-loop and closed-loop robust optimal control of batch processes using distributional and worst-case analysis , 2004 .

[17]  M. Mazzotti,et al.  Model-Based Optimization of Particle Size Distribution in Batch-Cooling Crystallization of Paracetamol , 2004 .

[18]  Kevin C. Johnson,et al.  Dissolution Modeling: Factors Affecting the Dissolution Rates of Polydisperse Powders , 1993, Pharmaceutical Research.

[19]  Robin Smith,et al.  Optimization of batch cooling crystallization , 2004 .

[20]  Dominique Bonvin,et al.  Dynamic optimization of batch processes: II. Role of measurements in handling uncertainty , 2003, Comput. Chem. Eng..

[21]  Hiroshi Takiyama,et al.  Effects of Undersaturation on Crystal Size Distribution in Cooling Type Batch Crystallization , 2002 .

[22]  H. Ooshima,et al.  Dissolution kinetics of crystals in suspension and its application to l-aspartic acid crystals , 2002 .

[23]  R. Braatz,et al.  Paracetamol Crystallization Using Laser Backscattering and ATR-FTIR Spectroscopy: Metastability, Agglomeration, and Control , 2002 .

[24]  H. Kramer,et al.  A Comparative Study of Various Size Distribution , 2002 .

[25]  F. Puel,et al.  An Online Strategy To Increase the Average Crystal Size during Organic Batch Cooling Crystallization , 2002 .

[26]  Noriaki Kubota,et al.  Effect of cooling mode on product crystal size in seeded batch crystallization of potassium alum , 2001 .

[27]  M. Moscosa-Santillan,et al.  Study of Batch Crystallization and Determination of an Alternative Temperature-time Profile by On-line Turbidity Analysis : Application to Glycine Crystallization , 2000 .

[28]  N. Kubota,et al.  Seeding Effect on Batch Crystallization of Potassium Sulfate under Natural Cooling Mode and a Simple Design Method of Crystallizer , 1999 .

[29]  David L. Ma,et al.  Worst‐case performance analysis of optimal batch control trajectories , 1999 .

[30]  D. L. Ma,et al.  Optimal seeding in batch crystallization , 1999 .

[31]  N. Kubota,et al.  LARGE AND MONO-SIZED PRODUCT CRYSTALS FROM NATURAL COOLING MODE BATCH CRYSTALLIZER , 1996 .

[32]  Sin-Chung Chang.  The Method of Space-Time Conservation Element and Solution Element-A New Approach for Solving the Navier-Stokes and Euler Equations , 1995 .

[33]  J. Rawlings,et al.  Model identification and control of solution crystallization processes: a review , 1993 .

[34]  Å. Rasmuson,et al.  Application of controlled cooling and seeding in batch crystallization , 1992 .

[35]  J. Macgregor,et al.  Particle Size Determination Using Turbidimetry: Capabilities, Limitations, and Evaluation for On-Line Applications , 1991 .

[36]  Alan Jones,et al.  Optimal operation of a batch cooling crystallizer , 1974 .

[37]  J. W. Mullin,et al.  Programmed cooling of batch crystallizers , 1971 .

[38]  A. Noyes,et al.  The rate of solution of solid substances in their own solutions , 1897 .