论文信息 - TUNING OF LEAD COMPENSATORS WITH GAIN AND PHASE MARGIN SPECIFICATIONS

TUNING OF LEAD COMPENSATORS WITH GAIN AND PHASE MARGIN SPECIFICATIONS

Abstract For a servo plant with an integrator, analytical tuning formulas for phase lead compensators with both gain and phase margin specifications are derived in this paper. Comparing with other tuning methods, this method is simple with a short tuning time. Simulation results under two typical cases show that this method is general, too.

[1] Chang Chieh Hang,et al. A technique for frequency response identification from relay feedback , 1999, IEEE Trans. Control. Syst. Technol..

[2] Qing-Guo Wang,et al. Robust closed-loop identification with application to auto-tuning , 2001 .

[3] Yu Zhang,et al. PID tuning with exact gain and phase margins , 1999 .

[4] Tong Heng Lee,et al. PI Tuning in Terms of Gain and Phase Margins , 1998, Autom..

[5] A. P. Loh,et al. Auto-tuning of phase lead/lag compensators , 2004, Autom..

[6] Peter K. F. Kuhfittig,et al. Introduction to the Laplace transform , 1978 .

[7] Kai Shing Yeung,et al. A universal design chart for linear time-invariant continuous-time and discrete-time compensators , 2000, IEEE Trans. Educ..

[8] Kai Shing Yeung,et al. A non-trial-and-error method for lag-lead compensator design , 1998 .

[9] Weng Khuen Ho,et al. Tuning of PID controllers based on gain and phase margin specifications , 1995, Autom..

[10] P. N. Paraskevopoulos,et al. Modern Control Engineering , 2001 .

[11] Katsuhiko Ogata,et al. Modern Control Engineering , 1970 .