Innovative Design of Drone Landing Gear Used as a Receiving Coil in Wireless Charging Application

A near-field wireless power transfer (WPT) technology is applied to recharge the battery of a small size drone. The WPT technology is an extremely attractive solution to build an autonomous base station where the drone can land to wirelessly charge the battery without any human intervention. The innovative WPT design is based on the use of a mechanical part of the drone, i.e., landing gear, as a portion of the electrical circuit, i.e., onboard secondary coil. To this aim, the landing gear is made with an adequately shaped aluminum pipe that, after suitable modifications, performs both structural and electrical functions. The proposed innovative solution has a very small impact on the drone aerodynamics and the additional weight onboard the drone is very limited. Once the design of the secondary coil has been defined, the configuration of the WPT primary coil mounted in a ground base station is optimized to get a good electrical performance, i.e., high values of transferred power and efficiency. The WPT design guidelines of primary and secondary coils are given. Finally, a demonstrator of the WPT system for a lightweight drone is designed, built, and tested.

[1]  Agus Budiyono,et al.  Autonomous UAV system development for payload dropping mission , 2015 .

[2]  Tommaso Campi,et al.  Near-Field Reduction in a Wireless Power Transfer System Using LCC Compensation , 2017, IEEE Transactions on Electromagnetic Compatibility.

[3]  Seongsoo Lee,et al.  EMI Reduction Methods in Wireless Power Transfer System for Drone Electrical Charger Using Tightly Coupled Three-Phase Resonant Magnetic Field , 2018, IEEE Transactions on Industrial Electronics.

[4]  Sung Ho Cho,et al.  Automatic wireless drone charging station creating essential environment for continuous drone operation , 2016, 2016 International Conference on Control, Automation and Information Sciences (ICCAIS).

[5]  Mehdi Bagheri,et al.  Wireless Charging Techniques for UAVs: A Review, Reconceptualization, and Extension , 2018, IEEE Access.

[6]  Milan Simic,et al.  Investigation in Wireless Power Transmission for UAV Charging , 2015, KES.

[7]  Danny Lee,et al.  Autonomous battery swapping system for quadcopter , 2015, 2015 International Conference on Unmanned Aircraft Systems (ICUAS).

[8]  Jonathan P. How,et al.  An Automated Battery Management System to Enable Persistent Missions With Multiple Aerial Vehicles , 2015, IEEE/ASME Transactions on Mechatronics.

[9]  Tommaso Campi,et al.  Wireless Power Transfer Technology Applied to an Autonomous Electric UAV with a Small Secondary Coil , 2018 .

[10]  Chunhua Liu,et al.  Design of an effective wireless air charging system for electric unmanned aerial vehicles , 2017, IECON 2017 - 43rd Annual Conference of the IEEE Industrial Electronics Society.

[11]  Aam Muharam,et al.  Design of power receiving side in wireless charging system for UAV application , 2017, 2017 International Conference on Sustainable Energy Engineering and Application (ICSEEA).

[12]  V. De Santis,et al.  Numerical Calculation of the Near Field Shielding for Carbon Fiber Reinforced Polymer (CFRP) Panels at Wireless Power Transfer Automotive Frequencies , 2018, 2018 IEEE Symposium on Electromagnetic Compatibility, Signal Integrity and Power Integrity (EMC, SI & PI).

[13]  G. C.,et al.  Electricity and Magnetism , 1888, Nature.

[14]  Bo Zhang,et al.  Nonlinear Parity-Time-Symmetric Model for Constant Efficiency Wireless Power Transfer: Application to a Drone-in-Flight Wireless Charging Platform , 2019, IEEE Transactions on Industrial Electronics.

[15]  F. Maradei,et al.  Magnetic field levels in drones equipped with Wireless Power Transfer technology , 2016, 2016 Asia-Pacific International Symposium on Electromagnetic Compatibility (APEMC).

[16]  D. Ghose,et al.  Search using multiple UAVs with flight time constraints , 2004, IEEE Transactions on Aerospace and Electronic Systems.

[17]  Manos M. Tentzeris,et al.  A drone-based wireless power transfer anc communications platform , 2017, 2017 IEEE Wireless Power Transfer Conference (WPTC).

[18]  Sejin Kwon,et al.  Active power management system for an unmanned aerial vehicle powered by solar cells, a fuel cell, and batteries , 2014, IEEE Transactions on Aerospace and Electronic Systems.

[19]  Tommaso Campi,et al.  Parametric analysis of load variation in WPT systems applied to AIMDs , 2016, 2016 46th European Microwave Conference (EuMC).

[20]  Robin J. Evans,et al.  Hierarchical model predictive control of UAVs performing multitarget-multisensor tracking , 2014, IEEE Transactions on Aerospace and Electronic Systems.

[21]  David C. Yates,et al.  Light-weight wireless power transfer for mid-air charging of drones , 2017, 2017 11th European Conference on Antennas and Propagation (EUCAP).

[22]  Mohammed Rabah,et al.  Development of Intelligent Drone Battery Charging System Based on Wireless Power Transmission Using Hill Climbing Algorithm , 2018, Applied System Innovation.

[23]  Jun Rim Choi,et al.  An Efficiency Enhancement Technique for a Wireless Power Transmission System Based on a Multiple Coil Switching Technique , 2016 .

[24]  Tommaso Campi,et al.  EMF Safety and Thermal Aspects in a Pacemaker Equipped With a Wireless Power Transfer System Working at Low Frequency , 2016, IEEE Transactions on Microwave Theory and Techniques.

[25]  U. Grasselli,et al.  Robust LCC compensation in wireless power transfer with variable coupling factor due to coil misalignment , 2015, 2015 IEEE 15th International Conference on Environment and Electrical Engineering (EEEIC).

[26]  Grant Covic,et al.  Inductive Power Transfer , 2013, Proceedings of the IEEE.

[27]  Mahamod Ismail,et al.  Opportunities and Challenges for Near-Field Wireless Power Transfer: A Review , 2017 .

[28]  N. Shinohara,et al.  Power without wires , 2011, IEEE Microwave Magazine.

[29]  Zheng Ma,et al.  Design of wireless power transfer device for UAV , 2016, 2016 IEEE International Conference on Mechatronics and Automation.

[30]  Lakmal Seneviratne,et al.  Autonomous Wireless Self-Charging for Multi-Rotor Unmanned Aerial Vehicles , 2017 .

[31]  Liu Bo,et al.  The dynamics research on the composite undercarriage of the Unmanned Aerial Vehicle , 2015, 2015 IEEE International Conference on Mechatronics and Automation (ICMA).

[32]  Konstantin Kondak,et al.  A Novel Landing System to Increase Payload Capacity and Operational Availability of High Altitude Long Endurance UAVs , 2016, 2016 International Conference on Unmanned Aircraft Systems (ICUAS).

[33]  Wei Zhang,et al.  Compensation Topologies of High-Power Wireless Power Transfer Systems , 2016, IEEE Transactions on Vehicular Technology.

[34]  Aam Muharam,et al.  Wireless battery charging system for drones via capacitive power transfer , 2017, 2017 IEEE PELS Workshop on Emerging Technologies: Wireless Power Transfer (WoW).