论文信息 - A new method of spur reduction in phase truncation for DDS

A new method of spur reduction in phase truncation for DDS

DDS (Direct digital synthesizer) is widely used for frequency synthesis. The factors that contribute to spurious signals are analyzed. Adding a random signal to DDS system was used for spurious reduction formerly. Those methods assuredly reduce the spurs while the noise floor of signals is worsened. A new spurious reduction technique based on two DDS is proposed. The first DDS generates the conventional sine signal. The other DDS produces the error signal which compensates for the phase truncation error in traditional DDS system. A spurious reduction circuit has been developed. The experimental result indicates that the spurious signal due to phase truncation can be reduced 8dBc at least.

Zhou Jianming

[1] R J Sutciffe,et al. A Low Spurious Direct Digital Synthesiser , 1998, 1998 28th European Microwave Conference.

[2] Hideyuki Nosaka,et al. A low-power direct digital synthesizer using a self-adjusting phase-interpolation technique , 2001, IEEE J. Solid State Circuits.

[3] Jouko Vankka,et al. Spur reduction techniques in sine output direct digital synthesis , 1996, Proceedings of 1996 IEEE International Frequency Control Symposium.

[4] Wu Yu-cheng. A Method for Eliminating the Phase Truncation Error of the DDS , 2007 .

[5] Jouko Vankka. 1996 IEEE INTERNATIONAL FREQUENCY CONTROL SYMPOSIUM METHODS OF MAPPING FROM PHASE TO SINE AMPLITUDE IN DIRECT DIGITAL SYNTHESIS , 1996 .