A note on the description of surface roughness using fractal dimension

Self-affine fractals are useful models of the surfaces of rock fractures. The scaling properties of these surfaces are described by two parameters, the fractal dimension and the crossover length. Two methods for estimating the fractal dimension of a profile of a rough surface are compared, the divider method and the spectral method. It is shown that the two methods yield the same results, if the horizontal resolution at which the profile is measured is smaller than the crossover length. However, for resolutions greater than the crossover length, the divider method always gives a fractal dimension close to 1. To guide future work, the crossover length is estimated for typical joint surfaces and for the San Andreas fault. Additionally, a simple method is proposed to obtain the correct fractal dimension without prior knowledge of the crossover length. copyright American Geophysical Union 1987

[1]  Stephen R. Brown,et al.  Fluid flow through rock joints: The effect of surface roughness , 1987 .

[2]  K. Aki,et al.  Fractal geometry in the San Andreas Fault System , 1987 .

[3]  Christopher H. Scholz,et al.  Fractal analysis applied to characteristic segments of the San Andreas Fault , 1987 .

[4]  Stephen R. Brown,et al.  Roughness of natural fault surfaces , 1987 .

[5]  James R. Carr,et al.  Rock Mass Classification Using Fractal Dimension , 1987 .

[6]  W. R. Dearman,et al.  Characterization of rock joint surfaces by fractal dimension , 1987 .

[7]  Stephen R. Brown,et al.  Correlation between the surfaces of natural rock joints , 1986 .

[8]  Stephen R. Brown,et al.  closure of rock joints , 1986 .

[9]  Paul Meakin,et al.  Formation of fractal cracks in a kinetic fracture model , 1986, Nature.

[10]  C. Scholz.  Preface: A short geophysical history of Westerly granite , 1986 .

[11]  Stephen R. Brown,et al.  Broad bandwidth study of the topography of natural rock surfaces , 1985 .

[12]  B. Mandelbrot.  Self-Affine Fractals and Fractal Dimension , 1985 .

[13]  J. B. Walsh,et al.  The effect of pressure on porosity and the transport properties of rock , 1984 .

[14]  Donald S. Fussell,et al.  Computer rendering of stochastic models , 1982, Commun. ACM.

[15]  D. Cruden,et al.  ESTIMATING JOINT ROUGHNESS COEFFICIENTS , 1979 .

[16]  Terry Engelder,et al.  The permeability of whole and jointed Barre Granite , 1979 .

[17]  J. B. Walsh,et al.  A new model for analyzing the effect of fractures on compressibility , 1979 .

[18]  A. Gangi,et al.  Variation of whole and fractured porous rock permeability with confining pressure , 1978 .

[19]  J. Hannay,et al.  Topography of random surfaces , 1978, Nature.

[20]  R. Sayles,et al.  Surface topography as a nonstationary random process , 1978, Nature.

[21]  N. Barton,et al.  The shear strength of rock joints in theory and practice , 1977 .