A novel method for preparing proton exchange membrane fuel cell electrodes by the ultrasonic-spray technique

Abstract A novel ultrasonic-spray method for preparing gas diffusion electrodes (GDEs) for proton exchange membrane fuel cell (PEMFC) is described. Platinum (Pt) loaded on Nafion ® -bonded GDEs were prepared by the ultrasonic-spray method on various commercial woven and non-woven gas diffusion layers (GDLs) at several Pt loadings in the range of 0.40–0.05 mg cm −2 . The ultrasonic-sprayed GDEs were tested and compared to commercial and hand -painted GDEs. It was found that the GDEs prepared by the ultrasonic-spray method exhibited better performances compared to those prepared by the hand -painting technique, especially at low Pt loadings. GDEs fabricated by the ultrasonic-spray method with a platinum loading of 0.05 mg cm −2 exhibited a peak power rating of 10.9 W mg −1 compared to 9.8 W mg −1 for hand -painted GDEs. For all experiments using various GDLs, Sigracet SGL 10BC exhibited the best performance with a peak power of 0.695 W cm −2 .

[1]  S. Liao,et al.  Performance of an ultra-low platinum loading membrane electrode assembly prepared by a novel catalyst-sprayed membrane technique , 2010 .

[2]  B. Pollet.  A novel method for preparing PEMFC electrodes by the ultrasonic and sonoelectrochemical techniques , 2009 .

[3]  B. Pollet.  The use of ultrasound for the fabrication of fuel cell materials , 2010 .

[4]  Bruno G. Pollet,et al.  The effect of materials on proton exchange membrane fuel cell electrode performance , 2011 .

[5]  B. Pollet,et al.  Platinum sonoelectrodeposition on glassy carbon and gas diffusion layer electrodes , 2011 .

[6]  P. Garcia-Ybarra,et al.  High platinum utilization in ultra-low Pt loaded PEM fuel cell cathodes prepared by electrospraying , 2010 .

[7]  Sung Hyun Kim,et al.  Fabrication methods for low-Pt-loading electrocatalysts in proton exchange membrane fuel cell systems , 2007 .

[8]  Boris I. Yakobson,et al.  Hydrogen, Fuel Cells and Infrastructure Technologies Program Multi-Year Research, Development and Demonstration Plan: , 2010 .

[9]  Lei Zhang,et al.  Non-noble Electrocatalysts for the PEM Fuel Cell Oxygen Reduction Reaction , 2008 .

[10]  S. Liao,et al.  High performance membrane electrode assembly with ultra-low platinum loading prepared by a novel multi catalyst layer technique , 2010 .

[11]  P. Brault,et al.  Performance of plasma sputtered fuel cell electrodes with ultra-low Pt loadings , 2009 .

[12]  I. Uchida,et al.  Characterization of Membrane Electrode Assembly for Fuel Cells Prepared by Electrostatic Spray Deposition , 2006 .

[13]  Hasuck Kim,et al.  Preparation of low Pt loading electrodes on Nafion (Na+)-bonded carbon layer with galvanostatic pulses for PEMFC application , 2006 .

[14]  S. Litster,et al.  PEM fuel cell electrodes , 2004 .