Preparation of nano-crystalline strontium-doped lanthanum manganate (LSM) powder and porous film by aerosol flame deposition

[1]  T. Matsui,et al.  A comparative study on polarization behavior of (La,Sr)MnO3 and (La,Sr)CoO3 cathodes for solid oxide fuel cells , 2010 .

[2]  Shung-Ik Lee,et al.  Thin film solid oxide fuel cells with copper cermet anodes , 2010 .

[3]  K. Shin,et al.  Functionalization of carbon nanotubes by radiation-induced graft polymerization. , 2009, Journal of nanoscience and nanotechnology.

[4]  M. M. Souza,et al.  Influence of the synthesis method on the porosity, microstructure and electrical properties of La0.7Sr0.3MnO3 cathode materials , 2009 .

[5]  H. Hahn,et al.  Nanoparticulate cathode thin films with high electrochemical activity for low temperature SOFC applications , 2009 .

[6]  H. Hahn,et al.  Synthesis and characterization of nanoparticulate films for intermediate temperature solid oxide fuel cells , 2009 .

[7]  Dongwook Shin,et al.  Synthesis of BaMgAl10O17:Eu2+ blue phosphor by electro-spray aerosol flame deposition. , 2009, Journal of nanoscience and nanotechnology.

[8]  Jian Xin Wang,et al.  Synthesis and properties of (La0.75Sr0.25)0.95MnO3±δ nano-powder prepared via Pechini route , 2009 .

[9]  M. Khaleel,et al.  Fabrication of gradient porous LSM cathode by optimizing deposition parameters in ultrasonic spray pyrolysis , 2008 .

[10]  K. Choy,et al.  The electrochemical properties of LSM-based cathodes fabricated by electrostatic spray assisted vapour deposition , 2008 .

[11]  Dongwook Shin,et al.  Synthesis of nano-crystalline Gd0.1Ce0.9O2−x for IT-SOFC by aerosol flame deposition , 2008 .

[12]  Dongwook Shin,et al.  Electrochemical characteristics of LiCoO2 nano-powder synthesized via aerosol flame deposition (AFD) , 2008 .

[13]  M. Cheng,et al.  Effects of GDC interlayer on performance of low-temperature SOFCs , 2008 .

[14]  C. Xia,et al.  Characteristics of La0.85Sr0.15MnO3–δ Powders Synthesized by a Glycine‐Nitrate Process , 2006 .

[15]  Yaohui Zhang,et al.  Influence of synthesis routes on the performance from weakly agglomerated yttria-stabilized zirconia nanomaterials , 2006 .

[16]  Suresh C. Sharma,et al.  Synthesis of Nanocrystalline Lanthanum Strontium Manganite Powder by the Urea–Formaldehyde Polymer Gel Combustion Route , 2006 .

[17]  F. Prado,et al.  Electrode reaction of Sr1−xLaxCo0.8Fe0.2O3−δ with x = 0.1 and 0.6 on Ce0.9Gd0.1O1.95 at 600 ≤ T ≤ 800 °C , 2006 .

[18]  T. Mahata,et al.  Combustion synthesis of gadolinia doped ceria powder , 2005 .

[19]  Meilin Liu,et al.  Functionally graded cathodes fabricated by sol-gel/slurry coating for honeycomb SOFCs , 2005 .

[20]  K. Wittmaack.  Towards a realistic description of the contribution of primary and secondary aerosols to ambient particle number and mass distributions , 2004 .

[21]  Shan Gao,et al.  Electrochemical properties of LSM–CBO composite cathode , 2004 .

[22]  Hong-Ki Lee.  Electrochemical characteristics of La1−xSrxMnO3 for solid oxide fuel cell , 2003 .

[23]  F. Saito,et al.  Mechanochemical synthesis of La0.7Sr0.3MnO3 by grinding constituent oxides , 2000 .

[24]  R. J. Bell,et al.  Influence of synthesis route on the catalytic properties of La1−xSrxMnO3 , 2000 .

[25]  Seung M. Oh,et al.  Microstructure and cathodic performance of La0.9Sr0.1MnO3 electrodes according to particle size of starting powder , 2000 .

[26]  Ferdinand Hofer,et al.  Thin-film zinc/manganese dioxide electrodes based on microporous polymer foils , 1999 .

[27]  J. D. Carter,et al.  Development of Solid‐Oxide Fuel Cells That Operate at 500°C , 1999 .

[28]  S. Barnett,et al.  Oxygen transfer processes in (La,Sr)MnO3/Y2O3-stabilized ZrO2 cathodes: an impedance spectroscopy study , 1998 .

[29]  L. Gauckler,et al.  MICROSTRUCTURE-PROPERTY RELATIONS OF SOLID OXIDE FUEL CELLS. MICROSTRUCTURAL DESIGN OF CATHODES AND CURRENT COLLECTORS , 1996 .

[30]  B. Steele.  Survey of materials selection for ceramic fuel cells II. Cathodes and anodes , 1996 .

[31]  M. Mogensen,et al.  ac Impedance study of the oxygen reduction mechanism on La1−xSrxMnO3 in solid oxide fuel cells , 1993 .

[32]  O. J. Velle,et al.  The electrode system ‖ZrO2: 8Y2O3 investigated by impedence spectroscopy , 1991 .

[33]  L. D. Haart,et al.  Deposition and Electrical Properties of Thin Porous Ceramic Electrode Layers for Solid Oxide Fuel Cell Application , 1991 .

[34]  Y. Takeda,et al.  Cathodic Polarization Phenomena of Perovskite Oxide Electrodes with Stabilized Zirconia , 1987 .

[35]  Dongwook Shin,et al.  Synthesis of yttria-stabilized zirconia film by Aerosol Flame Pyrolysis Deposition , 2008 .

[36]  C. Matei,et al.  Pure and doped lanthanum manganites obtained by combustion method , 2007 .

[37]  Dongwook Shin,et al.  Fabrication of NiO/YSZ anode for solid oxide fuel cells by aerosol flame deposition , 2007 .

[38]  Dongwook Shin,et al.  Synthesis of nano-sized gadolinia doped ceria powder by aerosol flame deposition , 2007 .

[39]  H. Schindler,et al.  Characterization of perovskite powders for cathode and oxygen membranes made by different synthesis routes , 2005 .

[40]  A. Rousset,et al.  Preparation and characterization of La1-xSrxMnO3+δ (0 ≤ x ≤ 0.6) powder by sol-gel processing , 2002 .

[41]  San Ping Jiang,et al.  A comparison of O2 reduction reactions on porous (La,Sr)MnO3 and (La,Sr)(Co,Fe)O3 electrodes , 2002 .