Minimum-time trajectories for two robots holding the same workpiece

The authors present an algorithm which minimizes the time for two robots holding the same workpiece to move along a given path. The method can be applied to any constrained robot system, including the case where one robot arm moves in contact with a surface. The unique feature of these systems is that they are redundantly actuated because they have more actuators then degrees of freedom. In addition to finding the optimum torque histories, the algorithm determines the contact force between each robot and the workpiece throughout the motion. Constraints on these internal forces are easily introduced into the algorithm. Examples are given for two planar arms holding a common workpiece. It is shown that arbitrary bounds on the internal forces of interaction on the workpiece may easily be imposed; this causes a reduction in the path traversal time. The motions found using this algorithm establish a performance limit on cooperating robot systems, and can be used to guide the analysis and design of such systems.<<ETX>>

[1]  V. T. Rajan.  Minimum time trajectory planning , 1985, Proceedings. 1985 IEEE International Conference on Robotics and Automation.

[2]  Bernard Roth,et al.  The Near-Minimum-Time Control Of Open-Loop Articulated Kinematic Chains , 1971 .

[3]  Arthur E. Ryson,et al.  Efficient Algorithm for Time-Optimal Control of a Two-Link Manipulator , 1990 .

[4]  Y. Chen,et al.  Time-optimal control of two-degree of freedom robot arms , 1988, Proceedings. 1988 IEEE International Conference on Robotics and Automation.

[5]  K. Kreutz,et al.  Load Balancing and Closed Chain Multiple Arm Control , 1988, 1988 American Control Conference.

[6]  L. Schumaker.  Spline Functions: Basic Theory , 1981 .

[7]  J. Bobrow,et al.  Time-Optimal Control of Robotic Manipulators Along Specified Paths , 1985 .

[8]  Andrew A. Goldenberg,et al.  Force and position control of manipulators during constrained motion tasks , 1989, IEEE Trans. Robotics Autom..

[9]  R.A. Freeman,et al.  Internal object loading for multiple cooperating robot manipulators , 1989, Proceedings, 1989 International Conference on Robotics and Automation.

[10]  Kang G. Shin,et al.  Minimum-time control of robotic manipulators with geometric path constraints , 1985 .

[11]  James E. Bobrow,et al.  Optimal Robot Path Planning Using the Minimum-Time Criterion , 2022 .

[12]  Steven Dubowsky,et al.  Global time optimal motions of robotic manipulators in the presence of obstacles , 1988, Proceedings. 1988 IEEE International Conference on Robotics and Automation.

[13]  Han-Pang Huang,et al.  Time-optimal control for a robotic contour following problem , 1988, IEEE J. Robotics Autom..

[14]  Y. F. Zheng,et al.  Optimal Load Distribution for Two Industrial Robots Handling a Single Object , 1989 .

[15]  Elmer G. Gilbert,et al.  Distance functions and their application to robot path planning in the presence of obstacles , 1985, IEEE J. Robotics Autom..