Simulation of Floating Bodies in Waves and Mooring in a 3D Numerical Wave Tank Using REEF3D

Mooring systems ensure the safety of structures near the shore like floating breakwaters and aquaculture cages by keeping them in position. Their design has to either provide enough flexibility to allow large displacements or enough strength to withstand the hydrodynamic loads while restraining the structural motion. The accurate determination of the motion of the moored-floating structure and the resulting tension forces in the cables is, therefore, of high significance to produce a safe and economical design. At the same time, the dynamics of the cables can be neglected in the early design process due to their minor contribution to the forces acting on the structure. Hence, an analytical solution for the cables can be found, which provides a fast solution to the problem. The mooring model is implemented in the open-source CFD model REEF3D. The solver has been widely used to study various problems in the field of wave hydrodynamics. It solves the incompressible Reynolds-averaged Navier–Stokes equations for two-phase flows using a finite-difference method and a level set method to model the free surface between water and air. Floating structures are represented by an additional level set function. Its motion is calculated from the Newton and Euler equations in 6DOF and in a non-inertial coordinate system. The fluid–structure interaction is solved explicitly using an immersed boundary method based on the ghost cell method. The application shows the accuracy of the solver and effects of mooring on the motion of a floating structure.

[1]  Mutsuto Kawahara,et al.  Lagrangian finite element method for the analysis of two‐dimensional sloshing problems , 1986 .

[2]  H. Bihs,et al.  A new level set numerical wave tank with improved density interpolation for complex wave hydrodynamics , 2016 .

[3]  Henk A. van der Vorst,et al.  Bi-CGSTAB: A Fast and Smoothly Converging Variant of Bi-CG for the Solution of Nonsymmetric Linear Systems , 1992, SIAM J. Sci. Comput..

[4]  Thomas L. Jackson,et al.  A high-order incompressible flow solver with WENO , 2009, J. Comput. Phys..

[5]  H. Bihs,et al.  A combined level set/ghost cell immersed boundary representation for floating body simulations , 2017 .

[6]  Andrew J. Goupee,et al.  Validation of a lumped-mass mooring line model with DeepCwind semisubmersible model test data , 2015 .

[7]  S. Osher,et al.  A level set approach for computing solutions to incompressible two-phase flow , 1994 .

[8]  J. Brackbill,et al.  A continuum method for modeling surface tension , 1992 .

[9]  Odd M. Faltinsen,et al.  Sea loads on ships and offshore structures , 1990 .

[10]  F. Stern,et al.  Ship motions using single-phase level set with dynamic overset grids , 2007 .

[11]  Frederick Stern,et al.  A simple and efficient direct forcing immersed boundary framework for fluid-structure interactions , 2012, J. Comput. Phys..

[12]  Odd M. Faltinsen,et al.  A local directional ghost cell approach for incompressible viscous flow problems with irregular boundaries , 2008, J. Comput. Phys..

[13]  Frederick Stern,et al.  Robust and Efficient Setup Procedure for Complex Triangulations in Immersed Boundary Simulations , 2012 .

[14]  H. S. Udaykumar,et al.  A Sharp Interface Cartesian Grid Methodfor Simulating Flows with ComplexMoving Boundaries , 2001 .

[15]  Danping Peng,et al.  Weighted ENO Schemes for Hamilton-Jacobi Equations , 1999, SIAM J. Sci. Comput..

[16]  Fotis Sotiropoulos,et al.  Level set immersed boundary method for coupled simulation of air/water interaction with complex floating structures , 2014, J. Comput. Phys..

[17]  John Ringwood,et al.  Mathematical Modelling of Mooring Systems for Wave Energy Converters—A Review , 2017 .

[18]  Thor I. Fossen,et al.  Guidance and control of ocean vehicles , 1994 .

[19]  A. Chorin.  Numerical solution of the Navier-Stokes equations , 1968 .

[20]  Ole Morten Aamo,et al.  Finite Element Modelling of Moored Vessels , 2001 .

[21]  Chi-Wang Shu,et al.  Efficient Implementation of Weighted ENO Schemes , 1995 .

[22]  S. Osher,et al.  Efficient implementation of essentially non-oscillatory shock-capturing schemes,II , 1989 .

[23]  J. Sethian,et al.  Fronts propagating with curvature-dependent speed: algorithms based on Hamilton-Jacobi formulations , 1988 .

[24]  Ping Dong,et al.  Nonlinear simulations of wave-induced motions of a freely floating body using WCSPH method , 2015 .

[25]  Elias Balaras,et al.  An embedded-boundary formulation for large-eddy simulation of turbulent flows interacting with moving boundaries , 2006, J. Comput. Phys..

[26]  S. Osher,et al.  Regular Article: A PDE-Based Fast Local Level Set Method , 1999 .

[27]  Shan Huang,et al.  Dynamic analysis of three-dimensional marine cables , 1994 .