The Influence of Microstructure on Brittle Fracture Toughness
暂无分享,去创建一个
[1] Robert O. Ritchie,et al. Evaluation of toughness in AISI 4340 alloy steel austenitized at low and high temperatures , 1976, Metallurgical and Materials Transactions. A.
[2] C. E. Richards,et al. A critical of carbide cracking mechanisms in ferride/carbide aggregates , 1970 .
[3] H. Ohtani,et al. The Microstructure and Toughness of High Tensile Strength Steels , 1972 .
[4] V. Vítek,et al. Solute segregation and intergranular brittle fracture in steels , 1980 .
[5] A. N. Stroh. A theory of the fracture of metals , 1957 .
[6] Robert O. Ritchie,et al. Critical fracture stress and fracture strain models for the prediction of lower and upper shelf toughness in nuclear pressure vessel steels , 1979 .
[7] M. A. Dokainish,et al. Simulation of the (001) plane crack in α-iron employing a new boundary scheme , 1982 .
[8] M. Biot,et al. DEFORMATION AND FLOW OF SOLIDS , 1965 .
[9] J. F. Knott,et al. Cleavage Fracture in Prestrained Mild Steel , 1975 .
[10] J. Gurland,et al. Observations on the fracture of cementite particles in a spheroidized 1.05% c steel deformed at room temperature , 1972 .
[11] K. Easterling,et al. Dynamic studies of the tensile deformation and fracture of pearlite using high-resolution 200-KV sem , 1978 .
[12] A. Mascanzoni,et al. Microstructure and cleavage resistance of low-carbon bainitic steels , 1977 .
[13] J. Knott,et al. The relationship between fracture toughness and microstructure in the cleavage fracture of mild steel , 1976 .
[14] G. T. Hahn,et al. Mechanisms of fast fracture and arrest in steels , 1972 .
[15] A. Argon,et al. Separation of second phase particles in spheroidized 1045 steel, Cu-0.6pct Cr alloy, and maraging steel in plastic straining , 1975 .
[16] V. Vítek,et al. A microscopic theory of brittle fracture in deformable solids: A relation between ideal work to fracture and plastic work , 1980 .
[17] F. Frank,et al. On the Theory of Kinking , 1952 .
[18] C. J. McMahon,et al. Initiation of cleavage in polycrystalline iron , 1965 .
[19] A. Inoue,et al. Microstructures of deformation and fracture of cementite in pearlitic carbon steels strained at various temperatures , 1977 .
[20] C. Mcmahon,et al. Solute segregation and brittle fracture in an alloy steel , 1980 .
[21] F. Lange. Transgranular fracture studies on magnesium oxide bicrystals , 1967 .
[22] P. Chomel,et al. Adoucissement du fer par le carbone en solution solide , 1977 .
[23] J. Im,et al. Cavity formation from inclusions in ductile fracture , 1975 .
[24] On stress intensifications in specimens of charpy geometry prior to general yield , 1967 .
[25] David R. Owen,et al. An elastic-plastic stress analysis for a notched bar in plane strain bending , 1971 .
[26] James R. Rice,et al. Ductile versus brittle behaviour of crystals , 1974 .
[27] John R. Rice,et al. ON THE RELATIONSHIP BETWEEN CRITICAL TENSILE STRESS AND FRACTURE TOUGHNESS IN MILD STEEL , 1973 .
[28] W. Gerberich,et al. STRAIN HARDENING AND RATE-SENSITIVITY EFFECTS ON THE DUCTILE-BRITTLE TRANSITION. , 1978 .
[29] J. Gurland,et al. Observations on the effect of cementite particles on the fracture toughness of spheroidized carbon steels , 1977 .
[30] H. Kotilainen. THE EFFECT OF SECONDARY HARDENING ON THE FRACTURE TOUGHNESS OF A BAINITIC MICROSTRUCTURE , 1980 .
[31] E. Hall,et al. The Deformation and Ageing of Mild Steel: III Discussion of Results , 1951 .
[32] L.-Å. Norström,et al. Influence of nickel on toughness and ductile-brittle transition in low-carbon martensite steels , 1979 .
[33] J. F. Knott,et al. Effect of microstructure on cleavage fracture toughness of quenched and tempered steels , 1979 .
[34] H. Freyhardt,et al. Superconducting composites produced by rapid quenching , 1978 .
[35] P. L. Pratt. Micromechanisms of crack extension in ceramics , 1980 .
[36] S. T. Rolfe,et al. The static and dynamic low-temperature crack-toughness performance of seven structural steels☆ , 1971 .
[37] Y. J. Park,et al. The process of crack initiation and effective grain size for cleavage fracture in pearlitic eutectoid steel , 1979 .
[38] K. Sieradzki,et al. The effect of a partially dissociated nitrogen environment on the fracture toughness of 4340 steel , 1978 .
[39] F. Abraham,et al. On the structure, thermodynamics and kinetics of phase stability: A microscopic theory , 1976 .
[40] C. A. Rau,et al. A general model to predict the elastic-plastic stress distribution and fracture strength of notched bars in plane strain bending☆ , 1968 .
[41] J. F. Knott,et al. Effects of microstructure on cleavage fracture stress in steel , 1978 .