Multi-objective optimization analysis for part-to-Printer assignment in a network of 3D fused deposition modeling

Abstract Additive manufacturing (AM) has become popular for both industrial and personal use thanks to the freedom and benefits it provides in designing parts, reducing lead time, improving inventory, and part consolidation. However, few studies examine process planning issues in a network of AM systems that account for part-to-printer assignment involving multiple parts and printers with scheduling objectives. AM printers are characterized by different processes, heating technologies, and sizes of the build chamber, which impacts efficient and effective process planning and 3D printer scheduling. Given fixed, unrotated orientation of parts, we propose a decision aiding model based on a multi-objective optimization for a batch of parts and multiple printers. The proposed model considers operating cost, load balance among printers, total tardiness, and total number of unprinted parts as objectives in fused deposition modeling (FDM) process. A case study with automotive parts is used to verify and validate model functionalities. Then, the conflicting objectives of the model are analyzed using trade-off analysis to understand conflicting aspect among objectives. Next, a designed experiment with different number of parts and printers show the complexity and the generalization of the model.

[1]  Harry Bikas,et al.  Additive manufacturing methods and modelling approaches: a critical review , 2015, The International Journal of Advanced Manufacturing Technology.

[2]  Christiane Beyer,et al.  Strategic Implications of Current Trends in Additive Manufacturing , 2014 .

[3]  Ivo J. B. F. Adan,et al.  Automating the production planning of a 3D printing factory , 2015, 2015 Winter Simulation Conference (WSC).

[4]  Jang-soon Choi,et al.  A Study on the Architectural Features of Rural Landscape Houses to be based on the Authentication System for Landscape Housing Selection of Samcheok City , 2014 .

[5]  H. Yrjölä,et al.  Rapid manufacturing and its impact on supply chain management , 2004 .

[6]  Prashant K. Jain,et al.  Role of build orientation in layered manufacturing: a review , 2013, Int. J. Manuf. Technol. Manag..

[7]  Richard A. Wysk,et al.  Additive manufacturing–integrated hybrid manufacturing and subtractive processes: economic model and analysis , 2016, Int. J. Comput. Integr. Manuf..

[8]  Barry Berman,et al.  3D printing: the new industrial revolution , 2012, IEEE Engineering Management Review.

[9]  Alain Bernard,et al.  Build orientation optimization for multi-part production in additive manufacturing , 2017, J. Intell. Manuf..

[10]  Namhun Kim,et al.  Data envelopment analysis-based multi-criteria decision making for part orientation selection in fused deposition modeling , 2017, 2017 4th International Conference on Industrial Engineering and Applications (ICIEA).

[11]  Julien Gardan,et al.  Additive manufacturing technologies: state of the art and trends , 2016 .

[12]  Seung Ki Moon,et al.  A Cost-Driven Design Methodology for Additive Manufactured Variable Platforms in Product Families , 2016 .

[13]  Alain Bernard,et al.  An integrated decision-making model for multi-attributes decision-making (MADM) problems in additive manufacturing process planning , 2014 .

[14]  Ian Campbell,et al.  Additive manufacturing: rapid prototyping comes of age , 2012 .

[15]  Debasish Dutta,et al.  A review of process planning techniques in layered manufacturing , 2000 .

[16]  Liang Hou,et al.  Additive manufacturing and its societal impact: a literature review , 2013 .

[17]  Hongbo Lan,et al.  Web-based rapid prototyping and manufacturing systems: A review , 2009, Comput. Ind..

[18]  Jan Holmström,et al.  Additive manufacturing in the spare parts supply chain , 2014, Comput. Ind..

[19]  Patrick T. Hester,et al.  An Analysis of Multi-Criteria Decision Making Methods , 2013 .

[20]  Jan H. Kietzmann,et al.  Disruptions, decisions, and destinations: enter the age of 3-D printing and additive manufacturing , 2015, IEEE Engineering Management Review.

[21]  Douglas S. Thomas,et al.  Costs and Cost Effectiveness of Additive Manufacturing , 2014 .

[22]  Namhun Kim,et al.  Agent-based Simulation Modeling of Low Fertility Trap Hypothesis , 2016, SIGSIM-PADS.

[23]  Ratnadeep Paul,et al.  Optimal part orientation in Rapid Manufacturing process for achieving geometric tolerances , 2011 .

[24]  Eleftherios Iakovou,et al.  A methodological framework for the inclusion of modern additive manufacturing into the production portfolio of a focused factory , 2015 .

[25]  Manfred Walter,et al.  Rapid manufacturing in the spare parts supply chain: Alternative approaches to capacity deployment , 2010 .

[26]  Thomas L. Saaty,et al.  Extending the Measurement of tangibles to Intangibles , 2009, Int. J. Inf. Technol. Decis. Mak..

[27]  Paolo Toth,et al.  Knapsack Problems: Algorithms and Computer Implementations , 1990 .

[28]  S. S. Pande,et al.  Optimum part orientation in Rapid Prototyping using genetic algorithm , 2012 .

[29]  Frank W. Liou,et al.  Process planning strategies for solid freeform fabrication of metal parts , 2008 .

[30]  Ronaldo M. Salles,et al.  Lexicographic maximin optimisation for fair bandwidth allocation in computer networks , 2008, Eur. J. Oper. Res..

[31]  Seok-Hee Lee,et al.  Determination of fabricating orientation and packing in SLS process , 2001 .

[32]  Ian Gibson,et al.  Additive manufacturing technologies : 3D printing, rapid prototyping, and direct digital manufacturing , 2015 .

[33]  Vojislav Petrovic,et al.  Additive layered manufacturing: sectors of industrial application shown through case studies , 2011 .

[34]  Sung-Hoon Ahn,et al.  A comparison of energy consumption in bulk forming, subtractive, and additive processes: Review and case study , 2014 .

[35]  S. Mason,et al.  Multiple-objective analysis of integrated relief supply and network restoration in humanitarian logistics operations , 2016 .

[36]  J. Giannatsis,et al.  Genetic-algorithm-based multi-objective optimization of the build orientation in stereolithography , 2009 .

[37]  F. Piller,et al.  Business Models with Additive Manufacturing—Opportunities and Challenges from the Perspective of Economics and Management , 2015 .

[38]  Jens Egeblad,et al.  Heuristic approaches for the two- and three-dimensional knapsack packing problem , 2009, Comput. Oper. Res..

[39]  A. Ravi Ravindran,et al.  Operations Research and Management Science Handbook , 2007 .

[40]  David W. Rosen,et al.  Design for Additive Manufacturing , 2015, Additive Manufacturing Technologies.

[41]  R. Gorkin,et al.  The adoption process and impact of additive manufacturing on manufacturing systems , 2016 .

[42]  Behzad Esmaeilian,et al.  The evolution and future of manufacturing: A review , 2016 .

[43]  Richard M. Karp,et al.  Reducibility Among Combinatorial Problems , 1972, 50 Years of Integer Programming.

[44]  David W. Rosen,et al.  A Brief History of Additive Manufacturing and the 2009 Roadmap for Additive Manufacturing: Looking Back and Looking Ahead , 2009 .

[45]  Mojtaba Khorram Niaki,et al.  Additive manufacturing management: a review and future research agenda , 2017, Int. J. Prod. Res..

[46]  David Z. Zhang,et al.  Additive manufacturing: A framework for implementation , 2014 .

[47]  Ming-Chuan Leu,et al.  Additive manufacturing: technology, applications and research needs , 2013, Frontiers of Mechanical Engineering.

[48]  S. Mason,et al.  Goal programming-based post-disaster decision making for integrated relief distribution and early-stage network restoration , 2016 .

[49]  Alain Bernard,et al.  Two-dimensional placement optimization for multi-parts production in additive manufacturing , 2016 .

[50]  Tobias Larsson,et al.  The role of Additive Manufacturing technology in job creation : An exploratory case study of suppliers of Additive Manufacturing in Sweden , 2015 .

[51]  Russell E. King,et al.  Multi-objective Optimization of 3D Packing Problem in Additive Manufacturing , 2014 .

[52]  Kaufui Wong,et al.  A Review of Additive Manufacturing , 2012 .