Preparation of multilayered C–Si–Al2O3 coatings on continuous carbon fibers and C–Si–Al2O3-coated carbon-fiber-reinforced hydroxyapatite composites

[1]  Juntong Huang,et al.  SiC/SiC mini-composites with multilayer ZrSiO4 interphase: Room-temperature properties and toughening mechanism , 2022, Ceramics International.

[2]  T. Uchikoshi,et al.  Antibacterial-functionalized Ag loaded-hydroxyapatite (HAp) coatings fabricated by electrophoretic deposition (EPD) process , 2021 .

[3]  Hejun Li,et al.  Interfacial microstructure and strengthening mechanisms of Cf/Mg composite with double-layer interface , 2021, Ceramics International.

[4]  G. K. Pouroutzidou,et al.  Incorporation of nanosized carbon over hydroxyapatite (HAp) surface using DC glow discharge plasma for biomedical application , 2021 .

[5]  R. He,et al.  Effects of pore size on the mechanical and biological properties of stereolithographic 3D printed HAp bioceramic scaffold , 2021 .

[6]  Jingdi Chen,et al.  Recent advances in biomedical engineering of nano-hydroxyapatite including dentistry, cancer treatment and bone repair , 2021 .

[7]  A. Bensalem,et al.  Synthesis, characterization, bactericidal activity, and mechanical properties of hydroxyapatite nano powders impregnated with silver and zinc oxide nanoparticles (Ag-ZnO-Hap) , 2021 .

[8]  E. Vasile,et al.  In vitro characterization of novel nanostructured collagen-hydroxyapatite composite scaffolds doped with magnesium with improved biodegradation rate for hard tissue regeneration , 2021, Bioactive materials.

[9]  Xiaohong Shi,et al.  TiAl–nHA composite coatings for sintering protection of carbon fiber and improvement of carbon fiber–hydroxyapatite composites interface , 2021 .

[10]  S. Ramakrishna,et al.  An in-vitro evaluation study on the effects of surface modification via physical vapor deposition on the degradation rates of magnesium-based biomaterials , 2021 .

[11]  S. Sagadevan,et al.  Influence of iron doping towards the physicochemical and biological characteristics of hydroxyapatite , 2020 .

[12]  M. Surmeneva,et al.  RF-magnetron sputter deposited hydroxyapatite-based composite & multilayer coatings: A systematic review from mechanical, corrosion, and biological points of view , 2020 .

[13]  S. Teoh,et al.  Bioinspired approaches to toughen calcium phosphate-based ceramics for bone repair. , 2020, Journal of the mechanical behavior of biomedical materials.

[14]  K. Balagangadharan,et al.  Nanosheets-incorporated bio-composites containing natural and synthetic polymers/ceramics for bone tissue engineering. , 2020, International journal of biological macromolecules.

[15]  Ling-jun Guo,et al.  Effect of pack cementation temperatures on component, microstructure and anti-oxidation performance of Al-modified SiC coatings on C/C composites , 2020 .

[16]  Weigang Zhang,et al.  Preparation of silicon coated-carbon fiber reinforced HA bio-ceramics for application of load-bearing bone , 2020 .

[17]  Fen Wang,et al.  Interfacial improvement of carbon fiber reinforced epoxy composites by tuning the content of curing agent in sizing agent , 2020 .

[18]  J. Rao,et al.  The role of PVD sputtered PTFE and Al2O3 thin films in the development of damage tolerant coating systems , 2020 .

[19]  Xinghong Zhang,et al.  Oxidation behavior and ablation mechanism of Cf/ZrB2-SiC composite fabricated by vibration-assisted slurry impregnation combined with low-temperature hot pressing , 2019 .

[20]  S. Maruyama,et al.  Ionic liquid wettability of CVD-grown graphene on Cu/α-Al2O3(0 0 0 1) characterized by in situ contact angle measurement in a vacuum , 2019, Chemical Physics Letters.

[21]  A. Zieliński,et al.  Effects of electrophoretic deposition times and nanotubular oxide surfaces on properties of the nanohydroxyapatite/nanocopper coating on the Ti13Zr13Nb alloy , 2019, Ceramics International.

[22]  F. Huang,et al.  Microstructural effects on the high-temperature steam oxidation resistance of magnetron sputtered Cr-Al-Si-N quaternary coatings on zirconium coupons , 2019, Surface and Coatings Technology.

[23]  Hezhou Liu,et al.  Effect of thickness of SiC films on compression and thermal properties of SiC/CF composites , 2019, Ceramics International.

[24]  M. Surmeneva,et al.  Correlation between structural and mechanical properties of RF magnetron sputter deposited hydroxyapatite coating , 2018, Materials Characterization.

[25]  Yang Jianjun,et al.  Preparation and mechanical properties of controllable orthogonal arrangement of carbon fiber reinforced hydroxyapatite composites , 2018 .

[26]  Aravind,et al.  A Study of Bio-Active Coating of Al2o3, Egg and Sea Shell Powder On Pvc, Teflon, And Polyurethane , 2018 .

[27]  Lin Songsheng,et al.  Microstructure and Anti-oxidation Properties of SiC/MoSi2-ZrB2 Coating for Carbon/Carbon Composites Prepared by Magnetron Sputtering Method , 2017 .

[28]  M. Qian,et al.  Grain refinement of binary Al-Si, Al-Cu and Al-Ni alloys by ultrasonication , 2017 .

[29]  Mohd Hamdi,et al.  Biomedical materials and techniques to improve the tribological, mechanical and biomedical properties of orthopedic implants – A review article , 2017 .

[30]  Hejun Li,et al.  Ablation resistance of supersonic-atmosphere-plasma-spraying ZrC coating doped with ZrO2 for SiC-coated carbon/carbon composites , 2017 .

[31]  Lu Wang,et al.  Preparation of Continuous Al2O3/Y2O3 Coating on Carbon Fiber by a Novel Aqueous Plasma Electrolysis , 2017 .

[32]  T. Tański,et al.  Prediction of the properties of PVD/CVD coatings with the use of FEM analysis , 2016 .

[33]  Won-Seok Kim,et al.  Metal-coated carbon fiber for lighter electrical metal wires , 2016 .

[34]  Haifeng Cheng,et al.  Enhancing the fracture resistance of carbon fiber reinforced SiC matrix composites by interface modification through a simple fiber heat-treatment process , 2016 .

[35]  Hejun Li,et al.  Micro-oxidation treatment to improve bonding strength of Sr and Na co-substituted hydroxyapatite coatings for carbon/carbon composites , 2016 .

[36]  Ying Huang,et al.  Effect of surface preparation on electroless Ni‐P plating on carbon fiber‐Reinforced Cyanate Ester Resin Laminate , 2016 .

[37]  Fen Wu,et al.  Preparation and microstructure of Al2O3–SiO2–TiO2 coating on three-dimensional braided carbon fiber by sol–gel technology , 2016 .

[38]  J. Chevalier,et al.  Ceramics and ceramic coatings in orthopaedics , 2015 .

[39]  Shahrouz Zamani Khalajabadi,et al.  Microstructural characterization, biocorrosion evaluation and mechanical properties of nanostructured ZnO and Si/ZnO coated Mg/HA/TiO2/MgO nanocomposites , 2015 .

[40]  Yan Wang,et al.  Mechanical properties and cytocompatibility of carbon fibre reinforced nano-hydroxyapatite/polyamide66 ternary biocomposite. , 2015, Journal of the mechanical behavior of biomedical materials.

[41]  Hejun Li,et al.  Ablation resistance of ZrB2–SiC coating prepared by supersonic atmosphere plasma spraying for SiC-coated carbon/carbon composites , 2014 .

[42]  Li Kezhi,et al.  Preparation and characterization of carbon/SiC nanowire/Na-doped carbonated hydroxyapatite multilayer coating for carbon/carbon composites , 2014 .

[43]  R. Wei,et al.  A comparative study of conventional magnetron sputter deposited and plasma enhanced magnetron sputter deposited Ti–Si–C–N nanocomposite coatings☆ , 2014 .

[44]  Zhou Fang,et al.  In-situ grown hydroxyapatite whiskers reinforced porous HA bioceramic , 2013 .

[45]  J. Voigt,et al.  Copper coated carbon fiber reinforced plastics for high and ultra high vacuum applications , 2013, 1308.2563.

[46]  S. Datta,et al.  Studies on novel bioactive glasses and bioactive glass–nano-HAp composites suitable for coating on metallic implants , 2011 .

[47]  L. Jian,et al.  Sol–gel prepared Al2O3 coatings for the application as tritium permeation barrier , 2010 .

[48]  Larry L Hench,et al.  Twenty-first century challenges for biomaterials , 2010, Journal of The Royal Society Interface.

[49]  Jenn‐Ming Yang,et al.  Flexural Properties of PAN‐ and Pitch‐Based Carbon Fibers , 2009 .

[50]  Lei Liu,et al.  Improvement of interface between Al and short carbon fibers by α-Al2O3 coatings deposited by sol–gel technology , 2008 .

[51]  Huang Bai-yun,et al.  Effects of coatings on the mechanical properties of carbon fiber reinforced HAP composites , 2004 .

[52]  S. Tzeng,et al.  EMI shielding effectiveness of metal-coated carbon fiber-reinforced ABS composites , 2001 .

[53]  J. Llorca,et al.  Influence of Fiber and Interfacial Properties on Fracture Behavior of Fiber‐Reinforced Ceramic Composites , 1991 .