Ultra-ductile and strong in-situ fibrillated PLA/PTFE nanocomposites with outstanding heat resistance derived by CO2 treatment

[1]  S. Goutianos,et al.  The effect of processing conditions and polymer crystallinity on the mechanical properties of unidirectional self-reinforced PLA composites , 2022, Composites Part A: Applied Science and Manufacturing.

[2]  Kyoung Taek Kim,et al.  Crystallization-Driven Self-Assembly of Block Copolymers Having Monodisperse Poly(lactic acid)s with Defined Stereochemical Sequences , 2021, Macromolecules.

[3]  Fanfan Du,et al.  Crystallization-Induced Polymer Scaffold Formation in the Polymer/Drug Delivery System Poly(l-lactic acid)/Ethyl Butylacetylaminopropionate (PLLA/IR3535). , 2021, Biomacromolecules.

[4]  Guoqun Zhao,et al.  Microcellular PLA/PMMA foam fabricated by CO2 foaming with outstanding shape-memory performance , 2021, Journal of CO2 Utilization.

[5]  Chul B. Park,et al.  Microcellular injection molded outstanding oleophilic and sound-insulating PP/PTFE nanocomposite foam , 2021 .

[6]  J. Móczó,et al.  Biobased PLA/sugarcane bagasse fiber composites: Effect of fiber characteristics and interfacial adhesion on properties , 2021 .

[7]  C. Macosko,et al.  Effects of a Layered Morphology on Drip Suppression in Burning Polymers , 2021 .

[8]  Chul B. Park,et al.  Nanofibrillated polymer systems: Design, application, and current state of the art , 2020 .

[9]  Y. Men.  Critical Strains Determine the Tensile Deformation Mechanism in Semicrystalline Polymers , 2020 .

[10]  Zhong Lin Wang,et al.  Flame-Retardant Textile-Based Triboelectric Nanogenerators for Fire Protection Applications. , 2020, ACS nano.

[11]  Chul B. Park,et al.  Lightweight and tough PP/talc composite foam with bimodal nanoporous structure achieved by microcellular injection molding , 2020 .

[12]  M. Arrieta,et al.  Improvement of PLA film ductility by plasticization with epoxidized karanja oil , 2020 .

[13]  Chul B. Park,et al.  Peculiar crystallization and viscoelastic properties of polylactide/polytetrafluoroethylene composites induced by in-situ formed 3D nanofiber network , 2020 .

[14]  Chul B. Park,et al.  Strong and super thermally insulating in-situ nanofibrillar PLA/PET composite foam fabricated by high-pressure microcellular injection molding , 2020, Chemical Engineering Journal.

[15]  S. Hatzikiriakos,et al.  Rheology and processing of polytetrafluoroethylene ( PTFE ) paste , 2020 .

[16]  Chul B. Park,et al.  Ultra-lightweight, super thermal-insulation and strong PP/CNT microcellular foams , 2020 .

[17]  Tairong Kuang,et al.  Facile fabrication of fully biodegradable and biorenewable poly (lactic acid)/poly (butylene adipate-co-terephthalate) in-situ nanofibrillar composites with high strength, good toughness and excellent heat resistance , 2020 .

[18]  Guoqun Zhao,et al.  Glass fiber reinforced PLA composite with enhanced mechanical properties, thermal behavior, and foaming ability , 2019, Polymer.

[19]  Guoqun Zhao,et al.  Strong and ductile poly (lactic acid) achieved by carbon dioxide treatment at room temperature , 2019, Journal of CO2 Utilization.

[20]  Chul B. Park,et al.  Extensional Flow Resistance of 3D Fiber Networks in Plasticized Nanocomposites , 2019, Macromolecules.

[21]  Shi‐Qing Wang,et al.  Why Is Crystalline Poly(lactic acid) Brittle at Room Temperature? , 2019, Macromolecules.

[22]  Guoqun Zhao,et al.  Strong and thermal-resistance glass fiber-reinforced polylactic acid (PLA) composites enabled by heat treatment. , 2019, International journal of biological macromolecules.

[23]  J. Zhao,et al.  Enhancing crystallization and mechanical properties of poly(lactic acid)/milled glass fiber composites via self-assembled nanoscale interfacial structures , 2019, Composites Part A: Applied Science and Manufacturing.

[24]  Guoqun Zhao,et al.  Effect of preparation methods on electrical and electromagnetic interference shielding properties of PMMA/MWCNT nanocomposites , 2018, Polymer Composites.

[25]  S. Fiori,et al.  PLA-based plasticized nanocomposites: Effect of polymer/plasticizer/filler interactions on the time evolution of properties , 2018, Composites Part B: Engineering.

[26]  Chul B. Park,et al.  Scalable Fabrication of Thermally Insulating Mechanically Resilient Hierarchically Porous Polymer Foams. , 2018, ACS applied materials & interfaces.

[27]  Chul B. Park,et al.  Lightweight and tough nanocellular PP/PTFE nanocomposite foams with defect-free surfaces obtained using in situ nanofibrillation and nanocellular injection molding , 2018, Chemical Engineering Journal.

[28]  Y. Men,et al.  Cavitation‐Induced Stress Whitening in Semi‐Crystalline Polymers , 2018, Macromolecular Materials and Engineering.

[29]  Chul B. Park,et al.  Use of stereocomplex crystallites for fully-biobased microcellular low-density poly(lactic acid) foams for green packaging , 2017 .

[30]  A. Efimov,et al.  Cold Crystallization of Glassy Polylactide during Solvent Crazing. , 2017, ACS applied materials & interfaces.

[31]  Savvas G. Hatzikiriakos,et al.  Role of PTFE paste fibrillation on Poisson's ratio , 2017 .

[32]  Tairong Kuang,et al.  Superior Impact Toughness and Excellent Storage Modulus of Poly(lactic acid) Foams Reinforced by Shish-Kebab Nanoporous Structure. , 2017, ACS applied materials & interfaces.

[33]  Jian-Bing Zeng,et al.  Progress in Toughening Poly(Lactic Acid) with Renewable Polymers , 2017 .

[34]  J. Byun,et al.  Catecholamine polymers as surface modifiers for enhancing interfacial strength of fiber-reinforced composites , 2015 .

[35]  A. Romo‐Uribe,et al.  SALS, WAXS and mechanical properties of heat‐treated thermotropic polymers , 2013 .

[36]  Seung Goo Lee,et al.  Isothermal crystallization behavior and mechanical properties of polylactide/carbon nanotube nanocomposites , 2013 .

[37]  K. Tashiro,et al.  Crystal structure and disorder in Poly(l-lactic acid) δ form (α′ form) and the phase transition mechanism to the ordered α form , 2011 .

[38]  E. Piorkowska,et al.  Mechanical and thermal properties of PLA composites with cellulose nanofibers and standard size fibers , 2011 .

[39]  G. Stoclet,et al.  Strain-Induced Molecular Ordering in Polylactide upon Uniaxial Stretching , 2010 .

[40]  M. Sumita,et al.  Crystalline Structure and Morphology of Poly(l-lactide) Formed under High-Pressure CO2 , 2008 .

[41]  Y. Inoue,et al.  Polymorphic Transition in Disordered Poly(l-lactide) Crystals Induced by Annealing at Elevated Temperatures , 2008 .

[42]  Angela M. Harris,et al.  Improving mechanical performance of injection molded PLA by controlling crystallinity , 2008 .

[43]  Kazuya Okubo,et al.  How to improve mechanical properties of polylactic acid with bamboo fibers , 2008 .

[44]  Y. Inoue,et al.  Polymorphous Crystallization and Multiple Melting Behavior of Poly(l-lactide): Molecular Weight Dependence , 2007 .

[45]  K. Na,et al.  SALS study on transcrystallization and fiber orientation in glass fiber/polypropylene composites , 2006 .

[46]  Rui Huang,et al.  On transcrystallinity in semi-crystalline polymer composites , 2005 .

[47]  L. Avérous,et al.  Poly(lactic acid): plasticization and properties of biodegradable multiphase systems , 2001 .