Developing a hybrid adoptive neuro-fuzzy inference system in predicting safety of factors of slopes subjected to surface eco-protection techniques

This study predicts the investigation of surface eco-protection techniques for cohesive soil slopes along the selected Guthrie Corridor Expressway stretch by way of analyzing a new set of probabilistic models using a hybrid technique of artificial neural network and fuzzy inference system namely adaptive neuro-fuzzy inference system (ANFIS). Soil erosion and mass movement which induce landslides have become one of the disasters faced in Selangor, Malaysia causing enormous loss affecting human lives, destruction of property and the environment. Establishing and maintaining slope stability using mechanical structures are costly. Hence, biotechnical slope protection offers an alternative which is not only cost effective but also aesthetically pleasing. A parametric study was carried out to discover the relationship between various eco-protection techniques, i.e., application of grasses, shrubs and trees with different soil properties as well as slope angles. Then the data have been used to develop a new hybrid ANFIS technique for prediction of factor of safety (FOS) of slopes. Four inputs were considered in relation to the different vegetation types, i.e., slope angle (θ), unit weight (γ), effective cohesion (c′), effective friction angle (ø′). Then, many hybrid ANFIS models were constructed, trained and tested using various parametric studies. Eventually, a hybrid ANFIS model with a high performance prediction and a low system error was developed and introduced for solving problem of slope stability.

[1]  Aminaton Marto,et al.  Predicting tunnel boring machine performance through a new model based on the group method of data handling , 2018, Bulletin of Engineering Geology and the Environment.

[2]  Jian Zhou,et al.  A Monte Carlo simulation approach for effective assessment of flyrock based on intelligent system of neural network , 2019, Engineering with Computers.

[3]  Junjie Li,et al.  System reliability analysis of slopes using least squares support vector machines with particle swarm optimization , 2016, Neurocomputing.

[4]  Abbas Heydari,et al.  Evaluation of the parameters affecting the Schmidt rebound hammer reading using ANFIS method , 2018 .

[5]  Jean-Claude Léon,et al.  Functional restructuring of CAD models for FEA purposes , 2015 .

[6]  Hossein Moayedi,et al.  Developing hybrid artificial neural network model for predicting uplift resistance of screw piles , 2017, Arabian Journal of Geosciences.

[7]  Yousef Zandi,et al.  Seismic performance evaluation of buckling restrained braced frames (BRBF) using incremental nonlinear dynamic analysis method (IDA). , 2017 .

[8]  He Ting-tin Slope reliability analysis using support vector machine , 2013 .

[9]  Norazman Mohamad Nor,et al.  Potential of adaptive neuro fuzzy inference system for evaluating the factors affecting steel-concrete composite beam's shear strength , 2016 .

[10]  Danial Jahed Armaghani,et al.  Development of a new hybrid ANN for solving a geotechnical problem related to tunnel boring machine performance , 2019, Engineering with Computers.

[11]  Melih İnal,et al.  Determination of dielectric properties of insulator materials by means of ANFIS: A comparative study , 2008 .

[12]  Karzan Wakil,et al.  Computational Lagrangian Multiplier Method using optimization and sensitivity analysis of rectangular reinforced concrete beams , 2018 .

[13]  N. S. Nilaweera,et al.  Assessment of strength properties of vetiver grass roots in relation to slope stabilization , 1996 .

[14]  R. H. Fouad,et al.  ELECTRICITY CONSUMPTION IN THE INDUSTRIAL SECTOR OF JORDAN: APPLICATION OF MULTIVARIATE LINEAR REGRESSION AND ADAPTIVE NEURO‐FUZZY TECHNIQUES , 2009 .

[15]  Danial Jahed Armaghani,et al.  A neuro-genetic predictive model to approximate overbreak induced by drilling and blasting operation in tunnels , 2019, Bulletin of Engineering Geology and the Environment.

[16]  Iman Mansouri,et al.  Strength prediction of rotary brace damper using MLR and MARS , 2016 .

[17]  Hossein Nezamabadi-pour,et al.  An evolutionary fuzzy modelling approach and comparison of different methods for shear strength prediction of high-strength concrete beams without stirrups , 2014 .

[18]  Danial Jahed Armaghani,et al.  The use of new intelligent techniques in designing retaining walls , 2019, Engineering with Computers.

[19]  H. A. Faisal,et al.  Engineering properties of Leucaena leucocephala for prevention of slope failure , 2008 .

[20]  Karim Nouri,et al.  Application of Schmidt rebound hammer and ultrasonic pulse velocity techniques for structural health monitoring , 2012 .

[21]  Edy Tonnizam Mohamad,et al.  Overbreak prediction and optimization in tunnel using neural network and bee colony techniques , 2018, Engineering with Computers.

[22]  Jr Greenwood,et al.  SLIP4EX – A Program for Routine Slope Stability Analysis to Include the Effects of Vegetation, Reinforcement and Hydrological Changes , 2006 .

[23]  Hani S. Mitri,et al.  Classification of Rockburst in Underground Projects: Comparison of Ten Supervised Learning Methods , 2016, J. Comput. Civ. Eng..

[24]  Meldi Suhatril,et al.  A Simple Modification of Homotopy Perturbation Method for the Solution of Blasius Equation in Semi-Infinite Domains , 2015 .

[25]  Mahdi Hasanipanah,et al.  A combination of the ICA-ANN model to predict air-overpressure resulting from blasting , 2015, Engineering with Computers.

[26]  Jyh-Shing Roger Jang,et al.  ANFIS: adaptive-network-based fuzzy inference system , 1993, IEEE Trans. Syst. Man Cybern..

[27]  M. H. Hashemi,et al.  Computational investigation of the comparative analysis of cylindrical barns subjected to earthquake , 2018 .

[28]  Normaniza Osman,et al.  Parameters to predict slope stability—Soil water and root profiles , 2006 .

[29]  Jian Zhou,et al.  Feasibility of Stochastic Gradient Boosting Approach for Evaluating Seismic Liquefaction Potential Based on SPT and CPT Case Histories , 2019, Journal of Performance of Constructed Facilities.

[30]  Jian Zhou,et al.  Support vector machines approach to mean particle size of rock fragmentation due to bench blasting prediction , 2012 .

[31]  Mohammadreza Koopialipoor,et al.  A Risk-Based Technique to Analyze Flyrock Results Through Rock Engineering System , 2018, Geotechnical and Geological Engineering.

[32]  Manoj Khandelwal,et al.  Effects of a proper feature selection on prediction and optimization of drilling rate using intelligent techniques , 2019, Engineering with Computers.

[33]  Faisal Ali,et al.  Use of vegetation for slope protection: Root mechanical properties of some tropical plants , 2010 .

[34]  Donald H. Gray,et al.  Biotechnical and Soil Bioengineering Slope Stabilization: A Practical Guide for Erosion Control , 1996 .

[35]  Hossein Bonakdari,et al.  Proposing a novel hybrid intelligent model for the simulation of particle size distribution resulting from blasting , 2018, Engineering with Computers.

[36]  Danial Jahed Armaghani,et al.  Three hybrid intelligent models in estimating flyrock distance resulting from blasting , 2018, Engineering with Computers.

[37]  Iman Mansouri,et al.  Analysis of influential factors for predicting the shear strength of a V-shaped angle shear connector in composite beams using an adaptive neuro-fuzzy technique , 2019, J. Intell. Manuf..

[38]  Okyay Kaynak,et al.  Adaptive neuro-fuzzy inference system based autonomous flight control of unmanned air vehicles , 2007, Expert Syst. Appl..

[39]  Dalibor Petkovic,et al.  Adaptive neuro-fuzzy estimation of autonomic nervous system parameters effect on heart rate variability , 2011, Neural Computing and Applications.

[40]  Ebrahim Noroozi Ghaleini,et al.  Developing a new intelligent technique to predict overbreak in tunnels using an artificial bee colony-based ANN , 2019, Environmental Earth Sciences.

[41]  Jian Zhou,et al.  Utilizing gradient boosted machine for the prediction of damage to residential structures owing to blasting vibrations of open pit mining , 2016 .

[42]  H. Nezamabadi-pour,et al.  Identification of a suitable ANN architecture in predicting strain in tie section of concrete deep beams , 2013 .

[43]  Curtis Collins,et al.  Adaptive neuro-fuzzy control of a flexible manipulator , 2005 .

[44]  Edy Tonnizam Mohamad,et al.  Estimating and optimizing safety factors of retaining wall through neural network and bee colony techniques , 2018, Engineering with Computers.

[45]  Alexia Stokes,et al.  Desirable plant root traits for protecting natural and engineered slopes against landslides , 2009, Plant and Soil.

[46]  Edy Tonnizam Mohamad,et al.  A combination of artificial bee colony and neural network for approximating the safety factor of retaining walls , 2018, Eng. Comput..

[47]  Mirna Issa,et al.  Adaptive neuro fuzzy controller for adaptive compliant robotic gripper , 2012, Expert Syst. Appl..

[48]  Mirna Issa,et al.  Adaptive neuro-fuzzy estimation of conductive silicone rubber mechanical properties , 2012, Expert Syst. Appl..

[49]  N. Sulong,et al.  Prediction of shear capacity of channel shear connectors using the ANFIS model , 2014 .

[50]  Danial Jahed Armaghani,et al.  Applying various hybrid intelligent systems to evaluate and predict slope stability under static and dynamic conditions , 2019, Soft Comput..

[51]  T. N. Singh,et al.  Estimation of elastic constant of rocks using an ANFIS approach , 2012, Appl. Soft Comput..

[52]  D. Varnes,et al.  Landslide types and processes , 2004 .

[53]  Mahdi Hasanipanah,et al.  Airblast prediction through a hybrid genetic algorithm-ANN model , 2018, Neural Computing and Applications.

[54]  Ship-Peng Lo,et al.  The prediction of wafer surface non-uniformity using FEM and ANFIS in the chemical mechanical polishing process , 2005 .

[55]  Mahdi Hasanipanah,et al.  Feasibility of PSO-ANN model for predicting surface settlement caused by tunneling , 2016, Engineering with Computers.

[56]  Danial Jahed Armaghani,et al.  Evaluation and prediction of flyrock resulting from blasting operations using empirical and computational methods , 2015, Engineering with Computers.

[57]  Nazri Ali,et al.  Soil-root interaction and effects on slope stability analysis , 2012 .

[58]  Meldi Suhatril,et al.  Fuzzy modelling approach for shear strength prediction of RC deep beams , 2015 .

[59]  Shahaboddin Shamshirband,et al.  RETRACTED ARTICLE: Potential of soft computing approach for evaluating the factors affecting the capacity of steel–concrete composite beam , 2016, Journal of Intelligent Manufacturing.

[60]  Normaniza Osman,et al.  The effect of plant succession on slope stability , 2011 .

[61]  Greenwood,et al.  In-situ shear box and root pull-out apparatus for measuring the reinforcing effects of vegetation , 2003 .

[62]  Babak Rezaee,et al.  Application of adaptive neuro-fuzzy inference system for solubility prediction of carbon dioxide in polymers , 2009, Expert Syst. Appl..

[63]  Karzan Wakil,et al.  Application of support vector machine with firefly algorithm for investigation of the factors affecting the shear strength of angle shear connectors , 2018 .

[64]  Betul Bektas Ekici,et al.  Prediction of building energy needs in early stage of design by using ANFIS , 2011, Expert Syst. Appl..

[65]  Mahdi Hasanipanah,et al.  Simulating the peak particle velocity in rock blasting projects using a neuro-fuzzy inference system , 2018, Engineering with Computers.

[66]  M. Grujicic,et al.  Modeling of ballistic-failure mechanisms in gas metal arc welds of mil a46100 armor-grade steel , 2015 .

[67]  Aydin Azizi,et al.  A new methodology for optimization and prediction of rate of penetration during drilling operations , 2019, Engineering with Computers.

[68]  C. H. Abdullah,et al.  Pull-Out and Tensile Strength Properties of Two Selected Tropical Trees , 2011 .