Novel Switched Reluctance Machine Configuration With Higher Number of Rotor Poles Than Stator Poles: Concept to Implementation

There is a great demand for efficient, quiet, reliable, and cost-effective motor drives for propulsion systems in hybrid and plug-in hybrid electric vehicles. Owing to a rigid structure and the absence of magnetic source on the rotor, a switched reluctance machine (SRM) is inherently robust and cost effective. In spite of these advantages, several challenges in the control of this machine remain an issue, including high levels of torque ripple, acoustic noise, and a relatively low torque density. This paper presents a new family of SRMs which have higher number of rotor poles than stator poles. Using a newly defined pole design formula, several novel combinations of the stator-rotor poles have been proposed. From the simulation and experimental analysis of a prototype 6/10 configuration, it has been observed that this machine produces higher torque per unit volume and comparable torque ripple when compared to a conventional 6/4 SRM with similar number of phases and constraints in volume. The results presented in this paper make this family of machines a strong contender for survivable high-performance applications for automotive propulsion systems. The simulation and experimental results for the prototype 6/10 configuration have been presented and compared to a conventional 6/4 design for verification.

[1]  Mehrdad Ehsani,et al.  Hybrid Electric Vehicles: Architecture and Motor Drives , 2007, Proceedings of the IEEE.

[2]  A. Emadi,et al.  Plug-in hybrid electric vehicle developments in the US: Trends, barriers, and economic feasibility , 2008, 2008 IEEE Vehicle Power and Propulsion Conference.

[3]  R. Krishnan,et al.  Sensorless control of single switch based switched reluctance motor drive using neural network , 2004, 30th Annual Conference of IEEE Industrial Electronics Society, 2004. IECON 2004.

[4]  Kaushik Rajashekara,et al.  Power Electronics and Motor Drives in Electric, Hybrid Electric, and Plug-In Hybrid Electric Vehicles , 2008, IEEE Transactions on Industrial Electronics.

[5]  Hamid A. Toliyat,et al.  Propulsion system design of electric and hybrid vehicles , 1997, IEEE Trans. Ind. Electron..

[6]  Timothy J. E. Miller,et al.  Switched Reluctance Motors and Their Control , 1993 .

[7]  Babak Fahimi,et al.  Bipolar Switched Reluctance Machines: A Novel Solution for Automotive Applications , 2005, IEEE Transactions on Vehicular Technology.

[8]  W.D. Jones.  Take this car and plug it [plug-in hybrid vehicles] , 2005, IEEE Spectrum.

[9]  Mehrdad Ehsani,et al.  Performance analysis of electric motor drives for electric and hybrid electric vehicle applications , 1996, Power Electronics in Transportation.

[10]  Jin-Woo Ahn,et al.  Hybrid excitation of SRM for reduction of vibration and acoustic noise , 2004, IEEE Transactions on Industrial Electronics.

[11]  Ching Chuen Chan,et al.  Overview of Permanent-Magnet Brushless Drives for Electric and Hybrid Electric Vehicles , 2008, IEEE Transactions on Industrial Electronics.

[12]  G. W. Carter,et al.  Electric Machines , 1967, Nature.

[13]  Yimin Gao,et al.  Study on the performance and control of SR machine for vehicle regenerative braking , 2008, 2008 IEEE Vehicle Power and Propulsion Conference.

[14]  S.S. Williamson,et al.  Electric Drive Train Efficiency Analysis Based on Varied Energy Storage System Usage for Plug-In Hybrid Electric Vehicle Applications , 2007, 2007 IEEE Power Electronics Specialists Conference.

[15]  A. V. Radun,et al.  Design considerations for the switched reluctance motor , 1994, Proceedings of 1994 IEEE Industry Applications Society Annual Meeting.

[16]  Mi-Ching Tsai,et al.  A novel switched reluctance motor with C-core stators , 2005 .

[17]  Iqbal Husain,et al.  Torque ripple minimization with indirect position and speed sensing for switched reluctance motors , 1999, IECON'99. Conference Proceedings. 25th Annual Conference of the IEEE Industrial Electronics Society (Cat. No.99CH37029).

[18]  Aleksandar M. Stankovic,et al.  On torque ripple reduction in current-fed switched reluctance motors , 1999, IEEE Trans. Ind. Electron..

[19]  K.R. Rajagopal,et al.  Calculation of the flux-linkage characteristics of a switched reluctance motor by flux tube method , 2005, IEEE Transactions on Magnetics.

[20]  M. Ehsani,et al.  Making the case for applications of switched reluctance motor technology in automotive products , 2006, IEEE Transactions on Power Electronics.

[21]  M. Ehsani,et al.  Advantages of switched reluctance motor applications to EV and HEV: design and control issues , 1998, Conference Record of 1998 IEEE Industry Applications Conference. Thirty-Third IAS Annual Meeting (Cat. No.98CH36242).

[22]  C. C. Chan,et al.  The State of the Art of Electric, Hybrid, and Fuel Cell Vehicles , 2007, Proceedings of the IEEE.

[23]  Alberto Tenconi,et al.  Temperatures Evaluation in an Integrated Motor Drive for Traction Applications , 2006, IEEE Transactions on Industrial Electronics.

[24]  S.E. Schulz,et al.  High performance fully digital switched reluctance motor controller for vehicle propulsion , 2001, Conference Record of the 2001 IEEE Industry Applications Conference. 36th IAS Annual Meeting (Cat. No.01CH37248).

[25]  C. C. Chan.  Low-Cost Electronic-Controlled Variable-Speed Reluctance Motors , 1987, IEEE Transactions on Industrial Electronics.

[26]  Demba Diallo,et al.  Electric Motor Drive Selection Issues for HEV Propulsion Systems: A Comparative Study , 2005, IEEE Transactions on Vehicular Technology.

[27]  R. Krishnan,et al.  Steady-state analysis of the variable-speed switched-reluctance motor drive , 1989 .

[28]  S. Schulz,et al.  Design of high efficiency and high density switched reluctance motor for vehicle propulsion , 2001, Conference Record of the 2001 IEEE Industry Applications Conference. 36th IAS Annual Meeting (Cat. No.01CH37248).

[29]  Sheng-Ming Yang,et al.  An Approach to Producing Controlled Radial Force in a Switched Reluctance Motor , 2007, IEEE Transactions on Industrial Electronics.

[30]  R. Sadeghi,et al.  Dynamic performance of a switched reluctance motor for propulsion systems , 2006, International Symposium on Power Electronics, Electrical Drives, Automation and Motion, 2006. SPEEDAM 2006..

[31]  Mehrdad Ehsani,et al.  Application of electrically peaking hybrid (ELPH) propulsion system to a full-size passenger car with simulated design verification , 1999 .

[32]  Chi-Yao Wu,et al.  Acoustic noise cancellation techniques for switched reluctance drives , 1995, IAS '95. Conference Record of the 1995 IEEE Industry Applications Conference Thirtieth IAS Annual Meeting.

[33]  Xin Li,et al.  Efficiency and suitability analyses of varied drive train architectures for plug-in hybrid electric vehicle (PHEV) applications , 2008, 2008 IEEE Vehicle Power and Propulsion Conference.

[34]  Chang-Ming Liaw,et al.  Intelligent tuning of commutation for maximum torque capability of a switched reluctance motor , 2003 .