Analysis and simulation of a mid-infrared P/sup +/-InAs/sub 0.55/Sb/sub 0.15/P/sub 0.30//n/sup 0/-InAs/sub 0.89/Sb/sub 0.11//N/sup +/-InAs/sub 0.55/Sb/sub 0.15/P/sub 0.30/ double heterojunction photodetector grown by LPE

A photovoltaic detector based on an N/sup +/-InAs/sub 0.55/Sb/sub 0.15/P/sub 0.30//n/sup 0/-InAs/sub 0.89/Sb/sub 0./$ d1/sub 1//P/sup +/-InAs/sub 0.55/Sb/sub 0.15/P/sub 0.30/ double heterostructure (DH) suitable for operation in the mid-infrared (MIR) spectral region (2 to 5 /spl mu/m) at room temperature has been studied. A physics based closed form model of the device has been developed to investigate the relative importance of the different mechanisms which determine dark current and photoresponse. The results obtained on the basis of the model have been compared and contrasted with those obtained from experimental measurements on DH detectors fabricated previously in our laboratory using liquid phase epitaxy (LPE). The model helps to explain the various physical mechanisms that shape the characteristics of the device under room temperature operation. It can also be used to optimize the performance of the photodetector in respect of dark current, responsivity and detectivity. A comparison of theoretical predictions and experimental results revealed that Shockley-Read-Hall (SRH) recombination is more important than Auger recombination in determining the room temperature detector performance when the concentration of nonradiative recombination centers in our material exceeds 10/sup 17/ cm/sup -3/. Furthermore, compositional grading in the cladding regions of the double heterostructure has been found to be responsible for the reduction of the detectivity of the device in the shorter wavelength region.

[1]  G. Glastre,et al.  MBE growth of room-temperature InAsSb mid-infrared detectors , 2001 .

[2]  C. T. Elliott,et al.  Multilayer InSb diodes grown by molecular beam epitaxy for near-ambient temperature operation , 1991 .

[3]  T. Ashley,et al.  A heterojunction minority carrier barrier for InSb devices , 1993 .

[4]  Hong Jiang,et al.  Numerical analysis of the detectivity in n(+)-n-p and p(+)-p-n GaInAsSb infrared detectors , 1999 .

[5]  A. Rogalski,et al.  Band-to-band recombination in InAs1−xSbx , 1985 .

[6]  Antoni Rogalski,et al.  Heterostructure infrared photovoltaic detectors , 2000 .

[7]  A. Krier,et al.  High quality InAs grown by liquid phase epitaxy using gadolinium gettering , 1999 .

[8]  Anthony Krier,et al.  A room temperature photovoltaic detector for the mid-infrared (1.8-3.4 m) wavelength region , 1998 .

[9]  J. G. Crowder,et al.  Direct determination of Shockley-Read-Hall trap density in InSb/InAlSb detectors , 2000 .

[10]  D. Day,et al.  Interband tunneling in heterostructure tunnel diodes , 1991 .

[11]  M. Shur,et al.  Handbook Series on Semiconductor Parameters , 1996 .

[12]  Hirofumi Kan,et al.  Room-Temperature Operation of InAsSb/InAsPSb Photodetectors with a Cut-off Wavelength of 4.3 µm , 1999 .

[13]  Neil Thomson Gordon,et al.  Epitaxial structures for reduced cooling of high-performance infrared detectors , 1998, Photonics West.

[14]  A. Rogalski,et al.  Near room-temperature InAsSb photodiodes: Theoretical predictions and experimental data , 1996 .

[15]  Y. Hayakawa,et al.  Room Temperature InAsxP 1-x-ySby/InAs Photodetectors with High Quantum Efficiency , 1997 .

[16]  W. Anderson,et al.  Absorption constant of Pb1−xSnxTe and Hg1−xCdxTe alloys☆ , 1980 .

[17]  A. Krier,et al.  Room-temperature InAs0.89Sb0.11 photodetectors for CO detection at 4.6 μm , 2000 .

[18]  Gaetano Assanto,et al.  High-performance p-i-n Ge on Si photodetectors for the near infrared: from model to demonstration , 2001 .

[19]  Y. Ning,et al.  Theoretical analysis of the Auger mechanism in a GaInAsSb infrared photovoltaic detector , 1998 .

[20]  Hong Jiang,et al.  Theoretical analysis of the detectivity in N-p and P-n GaSb/GaInAsSb infrared photodetectors , 2000 .