Topology optimization of planar shape memory alloy thermal actuators using element connectivity parameterization

This paper presents the direct application of topology optimization to the design of shape memory alloy (SMA) thermal actuators. Because SMAs exhibit strongly nonlinear, temperature-dependent material behavior, designing effective multidimensional SMA actuator structures is a challenging task. We pursue the use of topology optimization to address this problem. Conventional material scaling topology optimization approaches are hampered by the complexity of the SMA constitutive behavior combined with large actuator deflections. Therefore, for topology optimization we employ the element connectivity parameterization approach, which offers improved analysis convergence and robustness, as well as an unambiguous treatment of nonlinear materials. A path-independent SMA constitutive model, aimed particularly at the NiTi R-phase transformation, is employed, allowing efficient adjoint sensitivity analysis. The effectiveness of the proposed SMA topology optimization is demonstrated by numerical examples of constrained and unconstrained formulations of actuator stroke maximization, which provide insight into the characteristics of optimal SMA actuators. Copyright © 2011 John Wiley & Sons, Ltd.

[1]  Fred van Keulen,et al.  Design optimization of shape memory alloy active structures using the R-phase transformation , 2007, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[2]  Georges Dumont,et al.  Finite element simulation for design optimisation of shape memory alloy spring actuators , 2005 .

[3]  Fred van Keulen,et al.  Sensitivity analysis of shape memory alloy shells , 2008 .

[4]  Matthijs Langelaar,et al.  Design optimization of shape memory alloy structures , 2004 .

[5]  John Yen,et al.  Intelligent design optimization of a shape-memory-alloy-actuated reconfigurable wing , 2000, Smart Structures.

[6]  A. Pelton,et al.  An overview of nitinol medical applications , 1999 .

[7]  Jan Van Humbeeck,et al.  Non-medical applications of shape memory alloys , 1999 .

[8]  Anupam Saxena,et al.  Topology design of large displacement compliant mechanisms with multiple materials and multiple output ports , 2005 .

[9]  Shuichi Miyazaki,et al.  SMA microgripper with integrated antagonism , 2000 .

[11]  Dominiek Reynaerts,et al.  Scale effects and thermal considerations for micro-actuators , 1998, Proceedings. 1998 IEEE International Conference on Robotics and Automation (Cat. No.98CH36146).

[12]  E. Ramm,et al.  Large deformations and stability in topology optimization , 2005 .

[13]  Hisaaki Tobushi,et al.  Stress-Strain-Temperature Relationship Associated with the R-Phase Transformation in TiNi Shape Memory Alloy , 1992 .

[14]  Gil Ho Yoon,et al.  Optimal layout design of three‐dimensional geometrically non‐linear structures using the element connectivity parameterization method , 2007 .

[15]  Tian Jian Lu,et al.  Optimal design of a flexural actuator , 2001 .

[16]  Yoon Young Kim,et al.  The element connectivity parameterization formulation for the topology design optimization of multiphysics systems , 2005 .

[17]  Atsushi Kawamoto,et al.  Stabilization of geometrically nonlinear topology optimization by the Levenberg–Marquardt method , 2009 .

[18]  Craig A. Rogers,et al.  Design of Shape Memory Alloy Actuators , 1992 .

[19]  Bernardo Cockburn.  Discontinuous Galerkin methods , 2003 .

[20]  James K. Guest,et al.  Achieving minimum length scale in topology optimization using nodal design variables and projection functions , 2004 .

[21]  G. Yoon,et al.  Topology optimization of material‐nonlinear continuum structures by the element connectivity parameterization , 2007 .

[22]  Manfred Kohl,et al.  A novel actuation mechanism on the basis of ferromagnetic SMA thin films , 2004 .

[23]  M. Bendsøe,et al.  Generating optimal topologies in structural design using a homogenization method , 1988 .

[24]  Fred van Keulen,et al.  Gradient-based Design Optimization of Shape Memory Alloy Active Catheters , 2007 .

[25]  M. Rohde,et al.  On the response-time behaviour of laser micromachined NiTi shape memory actuators , 1997 .

[26]  Fred van Keulen,et al.  Modeling of shape memory alloy shells for design optimization , 2008 .

[27]  Y. Kim,et al.  Element connectivity parameterization for topology optimization of geometrically nonlinear structures , 2005 .

[28]  Wilhelm Pfleging,et al.  Flexible distal tip made of nitinol (NiTi) for a steerable endoscopic camera system , 1999 .

[29]  O. Sigmund,et al.  Stiffness design of geometrically nonlinear structures using topology optimization , 2000 .

[30]  Philippe Bidaud,et al.  Optimal design of micro-actuators based on SMA wires , 1999 .

[31]  F. van Keulen,et al.  Modeling and design of shape memory alloy actuators , 2005, EuroSimE 2005. Proceedings of the 6th International Conference on Thermal, Mechanial and Multi-Physics Simulation and Experiments in Micro-Electronics and Micro-Systems, 2005..

[32]  T. E. Bruns,et al.  Topology optimization of non-linear elastic structures and compliant mechanisms , 2001 .

[33]  K. Svanberg.  The method of moving asymptotes—a new method for structural optimization , 1987 .

[34]  Victor Birman,et al.  An approach to optimization of shape memory alloy hybrid composite plates subjected to low-velocity impact , 1996 .

[35]  Gil Ho Yoon,et al.  Theoretical aspects of the internal element connectivity parameterization approach for topology optimization , 2008 .