Proton conducting membranes composed of sulfonated poly(etheretherketone) and zirconium phosphate nanosheets for fuel cell applications

Abstract The composite membranes were prepared by dispersing particles (ZrP) or nanosheets (ZrP-NS) of layered zirconium phosphate hydrate (Zr(HPO 4 ) 2 · n H 2 O) in sulfonated poly(etheretherketone) (SPEEK) with various ZrP or ZrP-NS contents (0–50 vol.%). Their chemical stability and proton conductivities at 40–150 °C were investigated, and compared for ZrP- and ZrP-NS-composite membranes. The enhanced chemical stability was confirmed in both composite membranes. The results of thermogravimetry (TG)–differential thermal analysis (DTA) and diffuse reflectance Fourier transform infra-red (FT-IR) spectroscopy suggests that hydrogen-bonds were formed at both the SPEEK/ZrP and the SPEEK/ZrP-NS interface and that enhanced stability is attributed to these bonds. The membrane with 50 vol.% ZrP-NS showed a high conductivity of 7.9 × 10 − 2  S cm − 1 at 150 °C under saturated water vapor pressure, and a smaller relative humidity dependence of conductivity at 130 °C than the SPEEK membrane with 50 vol.% ZrP. The SPEEK/ZrP-NS composites were shown to have promising potential as membranes usable at 150 °C.

[1]  J. Mcgrath,et al.  Zirconium hydrogen phosphate/disulfonated poly(arylene ether sulfone) copolymer composite membranes for proton exchange membrane fuel cells , 2006 .

[2]  Silvia Licoccia,et al.  Nafion–TiO2 hybrid membranes for medium temperature polymer electrolyte fuel cells (PEFCs) , 2005 .

[3]  B. Smitha,et al.  Proton conducting composite membranes from polysulfone and heteropolyacid for fuel cell applications , 2005 .

[4]  Alessandro Lenci,et al.  SPEEK-TiO2 nanocomposite hybrid proton conductive membranes via in situ mixed sol–gel process , 2007 .

[5]  Ronghuan He,et al.  Proton conductivity of phosphoric acid doped polybenzimidazole and its composites with inorganic proton conductors , 2003 .

[6]  Y. Noguchi,et al.  Metastable Sr0.5TaO3 Perovskite Oxides Prepared by Nanosheet Processing , 2008 .

[7]  Ravindra Datta,et al.  Synthesis and characterization of Nafion®-MO2 (M = Zr, Si, Ti) nanocomposite membranes for higher temperature PEM fuel cells , 2005 .

[8]  Michael D. Guiver,et al.  Proton conducting composite membranes from polyether ether ketone and heteropolyacids for fuel cell applications , 2000 .

[9]  T. Sasaki,et al.  Osmotic Swelling to Exfoliation. Exceptionally High Degrees of Hydration of a Layered Titanate , 1998 .

[10]  S. Kaliaguine,et al.  Sulfonated polyether ether ketone based composite polymer electrolyte membranes , 2001 .

[11]  Chang-Soo Kim,et al.  Preparation of proton-conducting sulfonated poly(ether ether ketone)/boron phosphate composite membranes by an in situ sol–gel process , 2006 .

[12]  D. E. Hooks,et al.  Chemistry on the Edge: A Microscopic Analysis of the Intercalation, Exfoliation, Edge Functionalization, and Monolayer Surface Tiling Reactions of α-Zirconium Phosphate , 1998 .

[13]  Chenxi Sun,et al.  Preparation and characterization of Nafion/SPEEK layered composite membrane and its application in vanadium redox flow battery , 2008 .

[14]  T. Sasaki,et al.  Restacked Perovskite Nanosheets and Their Pt-Loaded Materials as Photocatalysts , 2002 .

[15]  M. Miyayama,et al.  Proton Conducting Properties of Layered Metal Phosphate Hydrates , 2006 .

[16]  Bernd Bauer,et al.  Polymeric proton conducting membranes for medium temperature fuel cells (110–160°C) , 2001 .

[17]  G. Alberti,et al.  On the mechanism of diffusion and ionic transport in crystalline insoluble acid salts of tetravalent metals—I Electrical conductance of zirconium bis (monohydrogen ortho-phosphate) monohydrate with a layered structure , 1978 .

[18]  T. Sasaki,et al.  Fabrication and Characterization of Multilayer Ultrathin Films of Exfoliated MnO2 Nanosheets and Polycations , 2003 .