The modelling and operations for the digital twin in the context of manufacturing

ABSTRACT The lack of effective methods to develop the product, process and operation models based on virtual and physical convergence leads to the poor performance on intelligence, real-time capability and predictability in production management. This paper proposes an approach of modelling and operations for the digital twin in the context of manufacturing. Firstly, the concept and extension of the digital twin in the manufacturing context are elaborated to provide the implementation methods of virtual-physical convergence and information integration for a factory. Secondly, the modelling approaches of product digital twins, process digital twins and operation digital twins are presented, then the interoperation mode between these digital twins are explained. Thirdly, to elaborate how to execute operations between product, process and resource, Automation Markup Language (AutomationML) is used for modelling a structural parts machining cell. Finally, the performance evaluation is provided to demonstrate the improvement of production efficiency by using the proposed approach.

[1]  Thomas Hedberg,et al.  Promoting Model-based Definition to Establish a Complete Product Definition. , 2016, Journal of manufacturing science and engineering.

[2]  Xin Chen,et al.  A Digital Twin-Based Approach for Designing and Multi-Objective Optimization of Hollow Glass Production Line , 2017, IEEE Access.

[3]  Fei Tao,et al.  Digital twin-driven product design, manufacturing and service with big data , 2017, The International Journal of Advanced Manufacturing Technology.

[4]  Fei Tao,et al.  New IT Driven Service-Oriented Smart Manufacturing: Framework and Characteristics , 2019, IEEE Transactions on Systems, Man, and Cybernetics: Systems.

[5]  Junliang Wang,et al.  Bilateral LSTM: A Two-Dimensional Long Short-Term Memory Model With Multiply Memory Units for Short-Term Cycle Time Forecasting in Re-entrant Manufacturing Systems , 2018, IEEE Transactions on Industrial Informatics.

[6]  Zhonghua Ni,et al.  Integrating modeling mechanism for three-dimensional casting process model based on MBD , 2018 .

[7]  Ahmad Adnan Al-Tit Factors affecting the organizational performance of manufacturing firms , 2017 .

[8]  Carlos Eduardo Pereira,et al.  Digital Twin Data Modeling with AutomationML and a Communication Methodology for Data Exchange , 2016 .

[9]  Long Chen,et al.  Design for control: A concurrent engineering approach for mechatronic systems design , 2001 .

[10]  MengChu Zhou,et al.  A Web service substitution method based on service cluster nets , 2017, Enterp. Inf. Syst..

[11]  Bin Wu,et al.  Integration of Advanced Simulation and Visualization for Manufacturing Process Optimization , 2016 .

[12]  Rolf Steinhilper,et al.  The Digital Twin: Demonstrating the Potential of Real Time Data Acquisition in Production Systems ☆ , 2017 .

[13]  Paulo Carlos Kaminski,et al.  Selection of virtual and physical prototypes in the product development process , 2015 .

[14]  José L. Martínez Lastra,et al.  Cloud computing as a facilitator for web service composition in factory automation , 2019, J. Intell. Manuf..

[15]  Jianhua Liu,et al.  Digital twin-based smart production management and control framework for the complex product assembly shop-floor , 2018, The International Journal of Advanced Manufacturing Technology.

[16]  George Zillante,et al.  Mobile Internet based construction supply chain management: A critical review , 2016 .

[17]  Zhuming Bi Embracing Internet of Things (IoT) and big data for industrial informatics , 2017, Enterp. Inf. Syst..

[18]  Yingfeng Zhang,et al.  CPS-Based Smart Control Model for Shopfloor Material Handling , 2018, IEEE Transactions on Industrial Informatics.

[19]  F. Richard Yu,et al.  Industrial Internet: A Survey on the Enabling Technologies, Applications, and Challenges , 2017, IEEE Communications Surveys & Tutorials.

[20]  Muh-Cherng Wu,et al.  Design of BOM configuration for reducing spare parts logistic costs , 2008, Expert Syst. Appl..

[21]  William Yeoh,et al.  Towards a resilience management framework for complex enterprise systems upgrade implementation , 2017, Enterp. Inf. Syst..

[22]  Yuan-Shin Lee,et al.  Sensor Data and Information Fusion to Construct Digital-twins Virtual Machine Tools for Cyber-physical Manufacturing , 2017 .

[23]  Wenhe Liao,et al.  Representation and share of part feature information in web-based parts library , 2006, Expert Syst. Appl..

[24]  Jie Zhang,et al.  Big data analytics for forecasting cycle time in semiconductor wafer fabrication system , 2016 .

[25]  Wenjun Chris Zhang,et al.  Information modelling for made-to-order virtual enterprise manufacturing systems , 1999, Comput. Aided Des..

[26]  Xiaojun Liu,et al.  An inspecting method of 3D dimensioning completeness based on the recognition of RBs , 2017 .

[27]  Wenjun Chris Zhang,et al.  Big data driven cycle time parallel prediction for production planning in wafer manufacturing , 2018, Enterp. Inf. Syst..

[28]  S. Michael Spottswood,et al.  Reengineering Aircraft Structural Life Prediction Using a Digital Twin , 2011 .

[29]  Aitor Ardanza,et al.  Virtualisation process of a sheet metal punching machine within the Industry 4.0 vision , 2016, International Journal on Interactive Design and Manufacturing (IJIDeM).

[30]  Chih-Hsing Chu,et al.  Multi-agent collaborative 3D design with geometric model at different levels of detail , 2009 .

[31]  Kazuo Furuta,et al.  On domain modelling of the service system with its application to enterprise information systems , 2016, Enterp. Inf. Syst..

[32]  Amadou Coulibaly,et al.  Complex product modeling based on a Multi-solution eXtended Conceptual Design Semantic Matrix for behavioral performance assessment , 2016, Comput. Ind..

[33]  Naiqi Wu,et al.  IoT-Enabled Real-Time Production Performance Analysis and Exception Diagnosis Model , 2016, IEEE Transactions on Automation Science and Engineering.

[34]  Meng Zhang,et al.  Digital Twin Shop-Floor: A New Shop-Floor Paradigm Towards Smart Manufacturing , 2017, IEEE Access.

[35]  Octavian Morariu,et al.  Shop-floor resource virtualization layer with private cloud support , 2016, J. Intell. Manuf..

[36]  Carlos Eduardo Pereira,et al.  Visualising the digital twin using web services and augmented reality , 2016, 2016 IEEE 14th International Conference on Industrial Informatics (INDIN).

[37]  Hervé Pingaud,et al.  A methodology proposal for collaborative business process elaboration using a model-driven approach , 2015, Enterp. Inf. Syst..

[38]  Sandro Wartzack,et al.  Shaping the digital twin for design and production engineering , 2017 .

[39]  Joaquim Filipe,et al.  Enterprise Information Systems , 2000, Springer Netherlands.

[40]  António Paulo Moreira,et al.  Flexible Work Cell Simulator Using Digital Twin Methodology for Highly Complex Systems in Industry 4.0 , 2017, ROBOT.

[41]  Xiaojun Liu,et al.  Assembly process modeling mechanism based on the product hierarchy , 2016 .

[42]  Dong Liu,et al.  Integration of System-Dynamics, Aspect-Programming, and Object-Orientation in System Information Modeling , 2014, IEEE Transactions on Industrial Informatics.

[43]  Ján Vachálek,et al.  The digital twin of an industrial production line within the industry 4.0 concept , 2017, 2017 21st International Conference on Process Control (PC).

[44]  Yiliu Tu,et al.  Manufacturing perspective of enterprise application integration: the state of the art review , 2008 .

[45]  Sanjay Jain,et al.  Towards smart manufacturing with virtual factory and data analytics , 2017, 2017 Winter Simulation Conference (WSC).

[46]  Rikard Söderberg,et al.  Toward a Digital Twin for real-time geometry assurance in individualized production , 2017 .

[47]  Amadou Coulibaly,et al.  Product modeling framework for behavioral performance evaluation at design stage , 2007, Comput. Ind..

[48]  Jing Zhang,et al.  Scheduling multimedia services in cloud computing environment , 2018, Enterp. Inf. Syst..

[49]  Luca Fumagalli,et al.  Flexible Automation and Intelligent Manufacturing , FAIM 2017 , 27-30 June 2017 , Modena , Italy A review of the roles of Digital Twin in CPS-based production systems , 2017 .

[50]  John Lane,et al.  IEEE Standard Computer Dictionary: Compilation of IEEE Standard Computer Glossaries , 1991 .

[51]  Junliang Wang,et al.  A Data Driven Cycle Time Prediction With Feature Selection in a Semiconductor Wafer Fabrication System , 2018, IEEE Transactions on Semiconductor Manufacturing.

[52]  Tianyou Chai,et al.  An intelligent factory-wide optimal operation system for continuous production process , 2016, Enterp. Inf. Syst..