Development of mechanical properties and microstructure for Al–Zn–Mg–Cu alloys through ECAP after optimizing the outer corner angles through FE modeling

[1]  A. Cichański,et al.  The effect of severe plastic deformation on the IF steel properties, evolution of structure and crystallographic texture after dual rolls equal channel extrusion deformation , 2021, Archives of Civil and Mechanical Engineering.

[2]  M. Jabłońska,et al.  Dual rolls equal channel extrusion as unconventional SPD process of the ultralow-carbon steel: finite element simulation, experimental investigations and microstructural analysis , 2021, Archives of Civil and Mechanical Engineering.

[3]  A. Ghosh,et al.  3D FEM simulation of Al-Zn-Mg-Cu alloy during multi-pass ECAP with varying processing routes , 2021 .

[4]  Li Li,et al.  On achieving superior strength for Al–Mg–Zn alloy adopting cold ECAP , 2020 .

[5]  L. Kestens,et al.  Development of ultrafine grained Al–Zn–Mg–Cu alloy by equal channel angular pressing: microstructure, texture and mechanical properties , 2020, Archives of Civil and Mechanical Engineering.

[6]  A. Seikh,et al.  Phase transformation and dispersoid evolution for Al-Zn-Mg-Cu alloy containing Sn during homogenisation , 2020 .

[7]  A. Ghosh,et al.  Influence of homogenisation time on evolution of eutectic phases, dispersoid behaviour and crystallographic texture for Al–Zn–Mg–Cu–Ag alloy , 2019, Journal of Alloys and Compounds.

[8]  Yanjun Li,et al.  Texture evolution of an Al-8Zn alloy during ECAP and post-ECAP isothermal annealing , 2019, Materials Characterization.

[9]  F. Li,et al.  Microstructure and Mechanical Properties of AA6082-T6 by ECAP Under Warm Processing , 2019, Metals and Materials International.

[10]  K. Xue,et al.  Strain‐Induced Dissolution and Precipitation of Secondary Phases and Synergetic Stengthening Mechanisms of Al–Zn–Mg–Cu Alloy during ECAP , 2019, Advanced Engineering Materials.

[11]  R. Valiev,et al.  Dynamic precipitation, segregation and strengthening of an Al-Zn-Mg-Cu alloy (AA7075) processed by high-pressure torsion , 2019, Acta Materialia.

[12]  A. Ghosh,et al.  On the role of precipitates in controlling microstructure and mechanical properties of Ag and Sn added 7075 alloys during artificial ageing , 2018, Materials Science and Engineering: A.

[13]  Z. Yin,et al.  Mechanical Properties and Microstructure of an Al-Zn-Mg-Sc-Zr Alloy Processed by Warm Equal Channel Angular Pressing and Subsequent Aging , 2018 .

[14]  R. Bjørge,et al.  Quantifying the grain boundary segregation strengthening induced by post-ECAP aging in an Al-5Cu alloy , 2018, Acta Materialia.

[15]  M. Shaeri,et al.  Fatigue behavior of AA7075 aluminium alloy severely deformed by equal channel angular pressing , 2018, Journal of Alloys and Compounds.

[16]  Yuanwei Sun,et al.  Mechanical properties and microstructure evolution of ultra-high strength Al-Zn-Mg-Cu alloy processed by room temperature ECAP with post aging , 2018, Materials Science and Engineering: A.

[17]  M. Wagner,et al.  On the Effect of Natural Aging Prior to Low Temperature ECAP of a High-Strength Aluminum Alloy , 2018 .

[18]  Lin Sun,et al.  Effect of quench-induced precipitation on microstructure and mechanical properties of 7085 aluminum alloy , 2017 .

[19]  Bing Chen,et al.  Precipitation in an Al-Zn-Mg-Cu alloy during isothermal aging: Atomic-scale HAADF-STEM investigation , 2017 .

[20]  M. Reihanian,et al.  Effect of strain path on microstructure, deformation texture and mechanical properties of nano/ultrafine grained AA1050 processed by accumulative roll bonding (ARB) , 2016 .

[21]  M. A. Agwa.  Optimum processing parameters for equal channel angular pressing , 2016 .

[22]  P. Snopiński,et al.  Structure and properties of AlMg alloy after combination of ECAP and post-ECAP ageing , 2016 .

[23]  Z. Yin,et al.  Microstructure and mechanical properties of 7005 aluminum alloy processed by room temperature ECAP and subsequent annealing , 2016 .

[24]  M. Ebrahimi,et al.  Effect of ECAP temperature on microstructure and mechanical properties of Al–Zn–Mg–Cu alloy , 2016 .

[25]  Davoud M. Jafarlou,et al.  Severe plastic deformation of tubular AA 6061 via equal channel angular pressing , 2016 .

[26]  F. Djavanroodi,et al.  Damage prediction of 7025 aluminum alloy during equal-channel angular pressing , 2014, International Journal of Minerals, Metallurgy, and Materials.

[27]  S. Sulaiman,et al.  Finite Element Study of Deformation Behaviour of Al-6063 Alloy Developed by Equal Channel Angular Extrusion , 2014 .

[28]  Joong-Keun Park,et al.  Microstructure and mechanical properties of Al-7075 alloy processed by equal channel angular pressing combined with aging treatment , 2014 .

[29]  A. K. Tieu,et al.  Influence of outer corner angle (OCA) on the plastic deformation and texture evolution in equal channel angular pressing , 2014 .

[30]  A. K. Tieu,et al.  Investigation of sample size effect on the deformation heterogeneity and texture development during equal channel angular pressing , 2013 .

[31]  M. Sedighi,et al.  Designing of ECAP parameters based on strain distribution uniformity , 2012 .

[32]  Faramarz Djavanroodi,et al.  Effect of die channel angle, friction and back pressure in the equal channel angular pressing using 3D finite element simulation , 2010 .

[33]  C. Şimşir,et al.  Investigating the effects of hardening of aluminium alloys on equal-channel angular pressing-A finite-element study , 2009 .

[34]  E. Cerri,et al.  FEM and metallurgical analysis of modified 6082 aluminium alloys processed by multipass ECAP: Influence of material properties and different process settings on induced plastic strain , 2009 .

[35]  Hyoung-Seop Kim,et al.  Analysis of T-shaped equal channel angular pressing using the finite element method , 2008 .

[36]  Hyoung-Seop Kim,et al.  Finite element analysis of the effect of the inner corner angle in equal channel angular pressing , 2008 .

[37]  Pham Quang,et al.  Die design for homogeneous plastic deformation during equal channel angular pressing , 2007 .

[38]  Guoqun Zhao,et al.  Finite element analysis and optimization of equal channel angular pressing for producing ultra-fine grained materials , 2007 .

[39]  A. Taheri,et al.  A new method for estimating strain in equal channel angular extrusion , 2007 .

[40]  J. Marte,et al.  Effect of friction, backpressure and strain rate sensitivity on material flow during equal channel angular extrusion , 2005 .

[41]  A. V. Nagasekhar,et al.  Optimal tool angles for equal channel angular extrusion of strain hardening materials by finite element analysis , 2004 .

[42]  T. Langdon,et al.  Influence of a round corner die on flow homogeneity in ECA pressing , 2003 .

[43]  Hyoung-Seop Kim,et al.  Finite element analysis of deformation behaviour of metals during equal channel multi-angular pressing , 2002 .

[44]  Hyoung-Seop Kim,et al.  Finite element analysis of equal channel angular pressing using a round corner die , 2001 .

[45]  T. Langdon,et al.  Influence of channel angle on the development of ultrafine grains in equal-channel angular pressing , 1998 .

[46]  R. Valiev,et al.  An investigation of ductility and microstructural evolution in an Al−3% Mg alloy with submicron grain size , 1993 .