论文信息 - Cyclic behaviour of axially loaded members: Numerical simulation and experimental verification

Cyclic behaviour of axially loaded members: Numerical simulation and experimental verification

Abstract This paper deals with the simulation of the cyclic behaviour of axially loaded members required in order to assess the performance of bracing systems under strong seismic actions. A numerical model is first presented; the experimental cyclic tests performed by the authors following the procedure developed by the ECCS are then described. Finally the results obtained by the two approaches are compared and discussed.

Federico Perotti | G. Ballio | F. Perotti | G. Ballio

[1] S. Vinnakota,et al. Inelastic behaviour of rotationally restrained columns under biaxial bending , 1974 .

[2] Lynn S. Beedle,et al. Basic Column Strength , 1960 .

[3] Robert L. Ketter,et al. Columns under Combined Bending and Thrust , 1959 .

[4] Bruce G. Johnston,et al. BEHAVIOR AND MAXIMUM STRENGTH OF METAL COLUMNS. , 1966 .

[5] James C. Anderson. Seismic Behavior of K-Braced Framing Systems , 1975 .

[6] Egor P. Popov. SEISMIC BEHAVIOUR OF STRUCTURAL SUBASSEMBLAGES , 1980 .

[7] Le-Wu Lu,et al. Structural Subassemblages Prevented from Sway , 1965 .

[8] Robert D. Hanson,et al. Seismic Behavior of Multistory Braced Steel Frames , 1974 .

[9] Egor P. Popov,et al. Cyclic Response Prediction for Braced Steel Frames , 1980 .

[10] Egor P. Popov,et al. Steel Struts under Severe Cyclic Loadings , 1981 .

[11] G. Ballio,et al. A Finite Element Describing axially loaded members subjected to Cyclic loads , 1983 .

[12] Federico M. Mazzolani,et al. Theory and design of steel structures , 1983 .

[13] Lynn S. Beedle,et al. Structural steel design , 1974 .