Working condition expansion and performance optimization of two-stage ejector based on optimal switching strategy

[1]  Hongbing Ding,et al.  A visual mass transfer study in the ejector considering phase change for multi-effect distillation with thermal vapour compression (MED-TVC) desalination system , 2022, Desalination.

[2]  J. Walther,et al.  Effect of area ratio of the primary nozzle on steam ejector performance considering nonequilibrium condensations , 2021 .

[3]  Haoyuan Xue,et al.  Performance analysis and optimization of a steam ejector through streamlining of the primary nozzle , 2021 .

[4]  Jia Yan,et al.  Optimization on key geometries of a highly coupled two-stage ejector , 2021 .

[5]  L. Jia,et al.  Effects of surface roughness and temperature on non-equilibrium condensation and entrainment performance in a desalination-oriented steam ejector , 2021 .

[6]  Lei Wang,et al.  Optimal design of two-stage ejector for subzero refrigeration system on fishing vessel , 2021 .

[7]  Fabio Inzoli,et al.  Computational fluid-dynamics modelling of supersonic ejectors: Screening of modelling approaches, comprehensive validation and assessment of ejector component efficiencies , 2020 .

[8]  Jia Yan,et al.  Numerical investigation on optimization of ejector primary nozzle geometries with fixed/varied nozzle exit position , 2020 .

[9]  Zhen-ying Zhang,et al.  Progress in ejector-expansion vapor compression refrigeration and heat pump systems , 2020 .

[10]  Chungang Xie,et al.  Design and investigation of a two-stage vacuum ejector for MED-TVC system , 2020 .

[11]  K. Pianthong,et al.  Performance analysis of a two-stage ejector in an ejector refrigeration system using computational fluid dynamics , 2020 .

[12]  Lei Wang,et al.  Optimization design of steam ejector primary nozzle for MED-TVC desalination system , 2019 .

[13]  Lei Wang,et al.  Performance investigation of an auto-tuning area ratio ejector for MED-TVC desalination system , 2019, Applied Thermal Engineering.

[14]  Bourhan Tashtoush,et al.  A comprehensive review of ejector design, performance, and applications , 2019, Applied Energy.

[15]  Jia Yan,et al.  Effects of operating conditions and cooling loads on two-stage ejector performances , 2019, Applied Thermal Engineering.

[16]  Giorgio Besagni,et al.  Ejectors on the cutting edge: The past, the present and the perspective , 2019, Energy.

[17]  Ramy H. Mohammed,et al.  Exergy and thermo-economic analysis for MED-TVC desalination systems , 2018, Desalination.

[18]  Jia Yan,et al.  Optimization on ejector key geometries of a two-stage ejector-based multi-evaporator refrigeration system , 2018, Energy Conversion and Management.

[19]  Mortaza Yari,et al.  Thermodynamic analysis and optimization of a novel combined power and ejector refrigeration cycle – Desalination system , 2017 .

[20]  Lei Wang,et al.  Design and numerical investigation of an adaptive nozzle exit position ejector in multi-effect distillation desalination system , 2017 .

[21]  Fabio Inzoli,et al.  Computational fluid-dynamics modeling of supersonic ejectors: Screening of turbulence modeling approaches , 2017 .

[22]  Fanshi Kong,et al.  Optimization study of a two-stage ejector–diffuser system , 2016 .

[23]  Hongxia Zhao,et al.  Numerical study and design of a two-stage ejector for subzero refrigeration , 2016 .

[24]  Neal Lawrence,et al.  Review of recent developments in advanced ejector technology , 2016 .

[25]  A. S. Hanafi,et al.  1-D Mathematical Modeling and CFD Investigation on Supersonic Steam Ejector in MED-TVC , 2015 .

[26]  Fanshi Kong,et al.  Analytical and computational studies on the performance of a two-stage ejector–diffuser system , 2015 .

[27]  Jiyuan Tu,et al.  Numerical study of primary steam superheating effects on steam ejector flow and its pumping performance , 2014 .

[28]  Yongping Yang,et al.  Integration of the steam cycle and CO2 capture process in a decarbonization power plant , 2014 .

[29]  Pei-Xue Jiang,et al.  Experimental and numerical investigation of the effect of shock wave characteristics on the ejector performance , 2014 .

[30]  Jianyong Chen,et al.  Investigation of ejectors in refrigeration system: Optimum performance evaluation and ejector area ratios perspectives , 2014 .

[31]  Junjie Yan,et al.  A 1D model to predict ejector performance at critical and sub-critical operational regimesModèle unidimensionnel utilisé pour prévoir la performance d'un éjecteur sous des conditions de fonctionnement critiques et sous-critiques , 2013 .

[32]  N. Sharifi.  Axisymmetric and three dimensional flow modeling within thermal vapor compressors , 2013 .

[33]  Navid Sharifi,et al.  An investigation of thermo-compressor design by analysis and experiment: Part 1. Validation of the numerical method , 2013 .

[34]  Xinping Long,et al.  Numerical investigation on the mixing process in a steam ejector with different nozzle structures , 2012 .

[35]  Jean-Marie Seynhaeve,et al.  CFD analysis of a supersonic air ejector. Part II: Relation between global operation and local flow features , 2009 .

[36]  Wenjian Cai,et al.  Shock circle model for ejector performance evaluation , 2007 .

[37]  T. Sriveerakul,et al.  Performance prediction of steam ejector using computational fluid dynamics: Part 1. Validation of the CFD results , 2007 .

[38]  Andrew Ooi,et al.  CFD analysis of ejector in a combined ejector cooling system , 2005 .

[39]  Bin-Juine Huang,et al.  A 1-D analysis of ejector performance , 1999 .

[40]  Bin-Juine Huang,et al.  Ejector Performance Characteristics and Design Analysis of Jet Refrigeration System , 1985 .

[41]  David F. Bagster,et al.  A New Ejector Theory Applied to Steam Jet Refrigeration , 1977 .

[42]  Fabio Inzoli,et al.  Ejector refrigeration: A comprehensive review , 2016 .

[43]  J. Keenan,et al.  An Investigation of Ejector Design by Analysis and Experiment , 1950 .