3D coseismic deformations and source parameters of the 2010 Yushu earthquake (China) inferred from DInSAR and multiple-aperture InSAR measurements

Abstract The coseismic deformation field related to the 2010 Mw6.9 Yushu earthquake (Qinghai, China) has been investigated by previous studies using the satellite differential interferometric synthetic aperture radar (DInSAR) method. However, one of the limiting factors in the conventional DInSAR is that it can measure only one-dimensional (1D) ground motion along the radar line of sight (LOS) direction, thus resulting in anamorphic coseismic displacements and biased source parameters. In this paper, the three-dimensional (3D) deformation maps for this earthquake were reconstructed over an area of about 100 × 70 km2 for the first time by a combined use of the DInSAR method for detecting LOS motion and the multiple-aperture interferometry (MAI) method for detecting along-track (AT) motion. The fault slip map for this earthquake was generated using the 3D deformation maps. Based on the fault traces on the fault slip map, we constructed a fault model with five segments and preformed a two-step inversion using the 3D deformation data as the constraint. Our results show that the maximum coseismic displacements in up–down, north–south and east–west directions are − 40.4, 113.8, and − 65.7 cm, respectively, and the peak-to-peak slip offset between the southern and northern fault wall is 1.82 m. Our model reveals a shallow dislocation on a NW–SE trending fault extending about 74 km, along which the four fault segments are nearly vertical (84°–88°) and the one fault segment dips 66.2° to the southwest. The estimated seismic moment is 2.43 × 1019 Nm (Mw6.92), which is close to the solution provided by the Global Centroid Moment Tensor (GCMT) Project. The slip distribution derived for each fault patch shows that the slip occurrence extends down to 12 km beneath the ground surface, and a peak slip of 2.23 m appears at the depth of about 5 km right near the epicenter. Comparison with the results derived from the seismic waves, field investigation, GPS and conventional DInSAR observations indicates that the source parameters of the Yushu earthquake can be improved due to the combined use of DInSAR and MAI measurements.

[1]  James Jackson,et al.  The 2010 MW 6.8 Yushu (Qinghai, China) earthquake: Constraints provided by InSAR and body wave seismology , 2011 .

[2]  Y. Fialko.  Probing the mechanical properties of seismically active crust with space geodesy: Study of the coseismic deformation due to the 1992 Mw7.3 Landers (southern California) earthquake , 2004 .

[3]  Henriette Sudhaus,et al.  Improved source modelling through combined use of InSAR and GPS under consideration of correlated data errors: application to the June 2000 Kleifarvatn earthquake, Iceland , 2009 .

[4]  M. de Michele,et al.  Time-variable 3D ground displacements from high-resolution synthetic aperture radar (SAR). application to La Valette landslide (South French Alps) , 2013 .

[5]  Fabiana Calò,et al.  Enhanced landslide investigations through advanced DInSAR techniques: The Ivancich case study, Assisi, Italy , 2014 .

[6]  Rowena B. Lohman,et al.  Some thoughts on the use of InSAR data to constrain models of surface deformation: Noise structure and data downsampling , 2005 .

[7]  Tim J. Wright,et al.  A non-linear geodetic data inversion using ABIC for slip distribution on a fault with an unknown dip angle , 2006 .

[8]  Guojie Meng,et al.  Coseismic Deformation of the 2010 Mw 6.9 Yushu Earthquake Derived from GPS Data , 2013 .

[9]  Rui Zhang,et al.  Surface deformation associated with the 2008 Ms8.0 Wenchuan earthquake from ALOS L-band SAR interferometry , 2010, International Journal of Applied Earth Observation and Geoinformation.

[10]  Peizhen Zhang,et al.  Present‐day crustal motion within the Tibetan Plateau inferred from GPS measurements , 2007 .

[11]  K. Feigl,et al.  Radar interferometry and its application to changes in the Earth's surface , 1998 .

[12]  Joong-Sun Won,et al.  An Improvement of the Performance of Multiple-Aperture SAR Interferometry (MAI) , 2009, IEEE Transactions on Geoscience and Remote Sensing.

[13]  Yaolin Shi,et al.  Dynamic simulation of interactions between major earthquakes on the Xianshuihe fault zone , 2008 .

[14]  Lei Zhang,et al.  3D coseismic Displacement of 2010 Darfield, New Zealand earthquake estimated from multi-aperture InSAR and D-InSAR measurements , 2012, Journal of Geodesy.

[15]  D. Agnew,et al.  The complete (3‐D) surface displacement field in the epicentral area of the 1999 MW7.1 Hector Mine Earthquake, California, from space geodetic observations , 2001 .

[16]  Zhong Lu,et al.  Integrated analysis of PALSAR/Radarsat-1 InSAR and ENVISAT altimeter data for mapping of absolute water level changes in Louisiana wetlands. , 2009 .

[17]  Peizhen Zhang,et al.  Slip maxima at fault junctions and rupturing of barriers during the 2008 Wenchuan earthquake , 2009 .

[18]  Xiaojing Li,et al.  Fault Geometry and Slip Distribution of the 2010 Yushu Earthquakes Inferred from InSAR Measurement , 2011 .

[19]  Brendan J. Meade,et al.  Present-day kinematics at the India-Asia collision zone , 2007 .

[20]  Pierre Briole,et al.  Surface displacement of the Mw 7 Machaze earthquake (Mozambique): Complementary use of multiband InSAR and radar amplitude image correlation with elastic modelling. , 2010 .

[21]  Pablo J. González,et al.  Coseismic Three-Dimensional Displacements Determined Using SAR Data: Theory and an Application Test , 2009 .

[22]  Y. Ran,et al.  The MS7.1 Yushu earthquake surface rupture and large historical earthquakes on the Garzê-Yushu Fault , 2010 .

[23]  Walter H. F. Smith,et al.  New, improved version of generic mapping tools released , 1998 .

[24]  Yun‐tai Chen,et al.  Source process of the 2010 Yushu, Qinghai, earthquake , 2010 .

[25]  P. Shi,et al.  Coseismic Surface Rupture Structures Associated with 2010 Ms 7.1 Yushu Earthquake, China , 2012 .

[26]  James Jackson,et al.  Surface displacements and source parameters of the 2003 Bam (Iran) earthquake from Envisat advanced synthetic aperture radar imagery , 2005 .

[27]  D. Sandwell,et al.  Three-dimensional deformation caused by the Bam, Iran, earthquake and the origin of shallow slip deficit , 2005, Nature.

[28]  R. Hanssen.  Radar Interferometry: Data Interpretation and Error Analysis , 2001 .

[29]  Peter Molnar,et al.  Active faulting and tectonics in China , 1977 .

[30]  Guifang Zhang,et al.  Earthquake deformation field characteristics associated with the 2010 Yushu Ms7.1 earthquake , 2011 .

[31]  W. Mooney,et al.  Crustal structure of the northeastern margin of the Tibetan plateau from the Songpan-Ganzi terrane to the Ordos basin , 2005 .

[32]  Tomokazu Kobayashi,et al.  Estimation of coseismic deformation and a fault model of the 2010 Yushu earthquake using PALSAR interferometry data , 2011 .

[33]  Bing Zhang,et al.  Spatial distribution and inducement of collapsed buildings in Yushu earthquake based on remote sensing analysis , 2010 .

[34]  H. Zebker,et al.  Fault Slip Distribution of the 1999 Mw 7.1 Hector Mine, California, Earthquake, Estimated from Satellite Radar and GPS Measurements , 2002 .

[35]  Y. Okada.  Surface deformation due to shear and tensile faults in a half-space , 1985 .

[36]  Sylvain Barbot,et al.  Space geodetic investigation of the coseismic and postseismic deformation due to the 2003 Mw7.2 Altai earthquake: Implications for the local lithospheric rheology , 2008 .

[37]  David A. Seal,et al.  The Shuttle Radar Topography Mission , 2007 .

[38]  H. Kanamori,et al.  A moment magnitude scale , 1979 .

[39]  James Jackson,et al.  The 1994 Sefidabeh (eastern Iran) earthquakes revisited: new evidence from satellite radar interferometry and carbonate dating about the growth of an active fold above a blind thrust fault , 2006 .

[40]  Joong-Sun Won,et al.  Mapping Three-Dimensional Surface Deformation by Combining Multiple-Aperture Interferometry and Conventional Interferometry: Application to the June 2007 Eruption of Kilauea Volcano, Hawaii , 2011, IEEE Geoscience and Remote Sensing Letters.

[41]  Coseismic deformation derived from analyses of C and L band SAR data and fault slip inversion of the Yushu Ms7.1 earthquake, China in 2010 , 2013 .

[42]  Co-seismic strike-slip surface rupture and displacement produced by the 2010 MW 6.9 Yushu earthquake, China, and implications for Tibetan tectonics , 2011 .

[43]  M. Taylor,et al.  Active structures of the Himalayan-Tibetan orogen and their relationships to earthquake distribution, contemporary strain field, and Cenozoic volcanism , 2009 .

[44]  H. Zebker,et al.  Measuring two‐dimensional movements using a single InSAR pair , 2006 .