Truth Cube: Establishing Physical Standards for Real Time Soft Tissue Simulation

Accurate and real-time models of soft tissue behavior are key elements in the development of medical simulation systems. However, precise validation of these models remains a challenge. Currently, real-time modeling is at best validated against FEM models that have their own intrinsic limitations. This study is the first in a series that will develop physical standards resulting in a database of relevant information used to validate real-time soft tissue deformation. In this first study, a simple 8cm cube of silicone rubber with an exact pattern of embedded Teflon beads was tested in uniaxial compression while CT images were taken. The known material properties, geometry, and carefully controlled boundary conditions resulted in a complete set of volumetric displacement data. The results were also compared to an FEM analysis of an identical situation. This work has served as a proof of concept for a robust physical standard for use in validating real time models. A web site has been created to provide access to our database at: http://biorobotics.harvard.edu/truthcube /.

[1]  G Mawdsley,et al.  Computed Tomography Artefacts: An Experimental Investigation of Causative Factors , 1998 .

[2]  H Delingette,et al.  Geometric and physical representations for a simulator of hepatic surgery. , 1996, Studies in health technology and informatics.

[3]  B. Neisius,et al.  The Karlsruhe Endoscopic Surgery Trainer as an example for virtual reality in medical education , 1997 .

[4]  李幼升,et al.  Ph , 1989 .

[5]  J G Pipe,et al.  Method for measuring three-dimensional motion with tagged MR imaging. , 1991, Radiology.

[6]  A F Mak,et al.  Estimating the effective Young's modulus of soft tissues from indentation tests--nonlinear finite element analysis of effects of friction and large deformation. , 1997, Medical engineering & physics.

[7]  Jerry L. Prince,et al.  Imaging heart motion using harmonic phase MRI , 2000, IEEE Transactions on Medical Imaging.

[8]  M. Ottensmeyer.  Minimally invasive instrument for in vivo measurement of solid organ mechanical impedance , 2001 .

[9]  Vincent Hayward,et al.  Multirate haptic simulation achieved by coupling finite element meshes through Norton equivalents , 1998, Proceedings. 1998 IEEE International Conference on Robotics and Automation (Cat. No.98CH36146).

[10]  M. A. Srinivasan,et al.  Virtual surgery simulation using a collocation-based method of finite spheres , 2001 .

[11]  Hervé Delingette,et al.  Nonlinear and anisotropic elastic soft tissue models for medical simulation , 2001, Proceedings 2001 ICRA. IEEE International Conference on Robotics and Automation (Cat. No.01CH37164).

[12]  R. Howe,et al.  Breast Tissue Stiffness in Compression is Correlated to Histological Diagnosis , 1999 .