Cu-Ni-P Alloy Nano Powders Prepared by Electrical Wire Explosion

[1]  A. Gromov,et al.  Aluminum nanopowders produced by electrical explosion of wires and passivated by non-inert coatings: Characterisation and reactivity with air and water , 2006 .

[2]  G. Zou,et al.  Preparation and characteristics of core–shell structure nickel/silica nanoparticles , 2005 .

[3]  A. Hubin,et al.  Interface between electroless amorphous Ni-Cu-P coatings and Al substrate , 2005 .

[4]  A. Gromov,et al.  Features of passivation, oxidation and combustion of tungsten nanopowders by air , 2004 .

[5]  C. Shearwood,et al.  Characterization of nanocrystalline TiNi powder , 2004 .

[6]  Yu. A. Kotov,et al.  Electric Explosion of Wires as a Method for Preparation of Nanopowders , 2003 .

[7]  Geun-Hie Rim,et al.  The mechanism of combustion of superfine aluminum powders , 2003 .

[8]  G. Zou,et al.  Synthesis of intermetallic NiAl by SHS reaction using coarse-grained nickel and ultrafine-grained aluminum produced by wire electrical explosion , 2002 .

[9]  G. Zou,et al.  Preparation and characterization of nanocrystalline powders of Cu–Zn alloy by wire electrical explosion method , 2001 .

[10]  Yonghun Jung,et al.  ULTRA-FINE POWDER BY WIRE EXPLOSION METHOD , 2001 .

[11]  G. Zou,et al.  Thermal characteristic of ultrafine-grained aluminum produced by wire electrical explosion , 2001 .

[12]  R. C. Birtcher,et al.  Comment on “effect of phosphorus content on the relative proportions of crystalline and amorphous phases in electroless NiP deposits” , 1995 .