A Parameter Dependent Riccati Equation Approach to Output Feedback Adaptive Control

A parameter dependent Riccati equation approach is taken to analyze the stability properties of an output feedback adaptive control law design. The adaptive controller is intended to augment a nominal, fixed gain, observer based output feedback control law. Although the formulation is in the setting of model following adaptive control, the realization of the adaptive controll er does not require implementing the reference model. In this regard, the cost of implementing the adaptive controller above that of a fixed gain control law is far less than that of other methods. The error signals are shown to be uniformly ultimately bounded and an expression for the ultimate bound is provided. The control design process and theoretical results are illustrated using a model for wing-rock dynamics. Research in adaptive output feedback control of uncertain nonlinear systems is motivated by the many emerging applications that employ novel actuation devices for active control of flexible structures and fluid flows. These applications include actuators such as piezo-electric films and s ynthetic jets, which are typically nonlinearly coupled to t he plant dynamics they are intended to control. Models for these applications vary from accurate low frequency models to models that crudely approximate the true dynamics even at low frequencies. Examples of applications include active damping of flexible structures, control of aeroservoelasti c aircraft, and active control of flows. Adaptive control can be used to satisfy performance requirements in the presence of large scale parameter uncertainty, and improved safety in the event of actuator failure.