Stacked Integration of MEMS on LSI

Two stacked integration methods have been developed to enable advanced microsystems of microelectromechanical systems (MEMS) on large scale integration (LSI). One is a wafer level transfer of MEMS fabricated on a carrier wafer to a LSI wafer. The other is the use of electrical interconnections using through-Si vias from the structure of a MEMS wafer on a LSI wafer. The wafer level transfer methods are categorized to film transfer, device transfer connectivity last, and immediate connectivity at device transfer. Applications of these transfer methods are film bulk acoustic resonator (FBAR) on LSI, lead zirconate titanate (Pb(Zr,Ti)O3) (PZT) MEMS switch on LSI, and surface acoustic wave (SAW) resonators on LSI using respective methods. A selective transfer process was developed for multiple SAW filters on LSI. Tactile sensors and active matrix electron emitters for massive parallel electron beam lithography were developed using the through-Si vias.

[1]  Masayoshi Esashi,et al.  Development of massively parallel electron beam direct write lithography using active-matrix nanocrystalline-silicon electron emitter arrays , 2015, Microsystems & Nanoengineering.

[2]  Zheyao Wang 3-D Integration and Through-Silicon Vias in MEMS and Microsensors , 2015, Journal of Microelectromechanical Systems.

[3]  M. Esashi,et al.  Monolithic fabrication of film bulk acoustic resonators above integrated circuit by adhesive-bonding-based film transfer , 2012, 2012 IEEE International Ultrasonics Symposium.

[4]  N. Ikegami,et al.  Development of ballistic hot electron emitter and its applications to parallel processing: active-matrix massive direct-write lithography in vacuum and thin films deposition in solutions , 2015, Advanced Lithography.

[5]  Frank Niklaus,et al.  Wafer-Level Heterogeneous Integration for MOEMS, MEMS, and NEMS , 2011, IEEE Journal of Selected Topics in Quantum Electronics.

[6]  Masayoshi Esashi,et al.  Development of ballistic hot electron emitter and its applications to parallel processing: active-matrix massive direct-write lithography in vacuum and thin-film deposition in solutions , 2015 .

[7]  Masayoshi Esashi,et al.  Heterogeneous integration by adhesive bonding , 2013 .

[8]  Hiroyuki Fujiwara,et al.  LED array integrated with Si driving circuits for LED printer printhead , 2006 .

[9]  Masayoshi Esashi,et al.  Electrical interconnection in anodic bonding of silicon wafer to LTCC wafer using highly compliant porous bumps made from submicron gold particles , 2012 .

[10]  Masayoshi Esashi,et al.  Lithium-niobate-based surface acoustic wave oscillator directly integrated with CMOS sustaining amplifier , 2012, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[11]  M. Esashi,et al.  Low-voltage PZT-actuated MEMS switch monolithically integrated with CMOS circuit , 2012, 2012 IEEE 25th International Conference on Micro Electro Mechanical Systems (MEMS).

[12]  Masayoshi Esashi,et al.  Integration of Boron-Doped Diamond Microelectrode on CMOS-Based Amperometric Sensor Array by Film Transfer Technology , 2015, Journal of Microelectromechanical Systems.

[13]  P. Vettiger,et al.  Wafer-scale microdevice transfer/interconnect: its application in an AFM-based data-storage system , 2004, Journal of Microelectromechanical Systems.

[14]  Kuan-Neng Chen,et al.  Wafer-to-Wafer Alignment for Three-Dimensional Integration: A Review , 2011, Journal of Microelectromechanical Systems.

[15]  Masayoshi Esashi,et al.  超並列電子線描画装置のためのピアース型ナノ結晶シリコン電子源アレイの作製;超並列電子線描画装置のためのピアース型ナノ結晶シリコン電子源アレイの作製;Fabrication of Pierce-Type Nanocrystalline Si Electron-Emitter Array for Massively Parallel Electron Beam Lithography , 2014 .

[16]  Yutaka Nonomura,et al.  Integration and packaging technology of MEMS-on-CMOS capacitive tactile sensor for robot application using thick BCB isolation layer and backside-grooved electrical connection , 2012 .

[17]  T. Nakayama,et al.  A 1.7mm3 MEMS-on-CMOS tactile sensor using human-inspired autonomous common bus communication , 2013, 2013 Transducers & Eurosensors XXVII: The 17th International Conference on Solid-State Sensors, Actuators and Microsystems (TRANSDUCERS & EUROSENSORS XXVII).

[18]  Masayoshi Esashi,et al.  Wafer-level selective transfer method for FBAR-LSI Integration , 2014, 2014 IEEE International Frequency Control Symposium (FCS).

[19]  M. Esashi,et al.  Wafer level packaging of MEMS , 2008, TRANSDUCERS 2009 - 2009 International Solid-State Sensors, Actuators and Microsystems Conference.

[20]  U. Drechsler,et al.  Selective Transfer Technology for Microdevice Distribution , 2008, Journal of Microelectromechanical Systems.

[21]  Hiroshi Takahashi,et al.  A 1/4-inch 8Mpixel back-illuminated stacked CMOS image sensor , 2013, 2013 IEEE International Solid-State Circuits Conference Digest of Technical Papers.