Fatigue performance evaluation of selective laser melted Ti–6Al–4V

[1]  R. Boyer.  An overview on the use of titanium in the aerospace industry , 1996 .

[2]  S. L. Semiatin,et al.  The effect of laser power and traverse speed on microstructure, porosity, and build height in laser-deposited Ti-6Al-4V , 2000 .

[3]  K. Osakada,et al.  The manufacturing of hard tools from metallic powders by selective laser melting , 2001 .

[4]  S. L. Semiatin,et al.  The laser additive manufacture of Ti-6Al-4V , 2001 .

[5]  K. Osakada,et al.  Residual Stress within Metallic Model Made by Selective Laser Melting Process , 2004 .

[6]  Kozo Osakada,et al.  Microstructure and mechanical properties of pure titanium models fabricated by selective laser melting , 2004 .

[7]  L. Froyen,et al.  Binding Mechanisms in Selective Laser Sintering and Selective Laser Melting , 2004 .

[8]  S. Kelly,et al.  Microstructural evolution in laser-deposited multilayer Ti-6Al-4V builds: Part I. Microstructural characterization , 2004 .

[9]  J. Kruth,et al.  Residual stresses in selective laser sintering and selective laser melting , 2006 .

[10]  F. Klocke,et al.  Consolidation phenomena in laser and powder-bed based layered manufacturing , 2007 .

[11]  Luca Facchini,et al.  Microstructure and mechanical properties of Ti‐6Al‐4V produced by electron beam melting of pre‐alloyed powders , 2009 .

[12]  Ryan B. Wicker,et al.  Microstructures and mechanical properties of electron beam-rapid manufactured Ti–6Al–4V biomedical prototypes compared to wrought Ti–6Al–4V , 2009 .

[13]  Ekkard Brinksmeier,et al.  Surface integrity of selective-laser-melted components , 2010 .

[14]  M. Ramulu,et al.  Mechanical Performance of Heat Treated Ti-6Al-4V Friction Stir Welds , 2010 .

[15]  Konrad Wissenbach,et al.  Ductility of a Ti‐6Al‐4V alloy produced by selective laser melting of prealloyed powders , 2010 .

[16]  Christoph Leyens,et al.  Additive manufactured Ti-6Al-4V using welding wire: comparison of laser and arc beam deposition and evaluation with respect to aerospace material specifications , 2010 .

[17]  J. Kruth,et al.  A study of the microstructural evolution during selective laser melting of Ti–6Al–4V , 2010 .

[18]  David L. Bourell,et al.  Sustainability issues in laser-based additive manufacturing , 2010 .

[19]  Sara M. Gaytan,et al.  Evaluation of Titanium Alloys Fabricated Using Rapid Prototyping Technologies—Electron Beam Melting and Laser Beam Melting , 2011, Materials.

[20]  Claus Emmelmann,et al.  Process and Mechanical Properties: Applicability of a Scandium modified Al-alloy for Laser Additive Manufacturing , 2011 .

[21]  Michael Schmidt,et al.  New Developments of Laser Processing Aluminium Alloys via Additive Manufacturing Technique , 2011 .

[22]  Christoph Leyens,et al.  Mechanical properties of additive manufactured titanium (Ti–6Al–4V) blocks deposited by a solid-state laser and wire , 2011 .

[23]  Omer Van der Biest,et al.  Wire based additive layer manufacturing: Comparison of microstructure and mechanical properties of Ti–6Al–4V components fabricated by laser-beam deposition and shaped metal deposition , 2011 .

[24]  Frédéric Vignat,et al.  Designing for Additive Manufacturing , 2012 .

[25]  Ratnadeep Paul,et al.  Process energy analysis and optimization in selective laser sintering , 2012 .

[26]  Sami Kara,et al.  Towards Energy and Resource Efficient Manufacturing: A Processes and Systems Approach , 2012 .

[27]  C. Colin,et al.  Microstructural and mechanical approaches of the selective laser melting process applied to a nickel-base superalloy , 2012 .

[28]  E. Brandl,et al.  Additive manufactured AlSi10Mg samples using Selective Laser Melting (SLM): Microstructure, high cycle fatigue, and fracture behavior , 2012 .

[29]  Robert L. Mason,et al.  Fatigue Life of Titanium Alloys Fabricated by Additive Layer Manufacturing Techniques for Dental Implants , 2013, Metallurgical and Materials Transactions A.

[30]  H. Maier,et al.  Inconel 939 processed by selective laser melting: Effect of microstructure and temperature on the mechanical properties under static and cyclic loading , 2013 .

[31]  Antti Salminen,et al.  Temperature profile and imaging analysis of laser additive manufacturing of stainless steel , 2013 .

[32]  Moataz M. Attallah,et al.  Microstructure and tensile properties of selectively laser-melted and of HIPed laser-melted Ti–6Al–4V , 2013 .

[33]  Konrad Wegener,et al.  Fatigue performance of additive manufactured metallic parts , 2013 .

[34]  H. Maier,et al.  On the mechanical behaviour of titanium alloy TiAl6V4 manufactured by selective laser melting: Fatigue resistance and crack growth performance , 2013 .

[35]  Timothy P. Quinn,et al.  Effects of processing on microstructure and mechanical properties of a titanium alloy (Ti–6Al–4V) fabricated using electron beam melting (EBM), part 1: Distance from build plate and part size , 2013 .