Digital Image Correlation Based on Projected Pattern for High Frequency Vibration Measurements

Abstract The dynamic characterization of mechanical components is a crucial issue in industry, especially in the field of rotating machinery. High frequency loads are typical in this field and experimental tools need to fulfill severe specifications to be able to analyze these high-speed phenomena. In this work, an experimental setup, based on a Digital Image Correlation (DIC) technique with a projected speckle pattern, is presented. The proposed approach allows the measurement of vibrational response characterized by a single sinusoidal component having a frequency up to 500 Hz and an amplitude lower than 10 μm.

[1]  Paolo Neri,et al.  Automated Experimental Modal Analysis of Bladed Wheels with an Anthropomorphic Robotic Station , 2017 .

[2]  Paolo Neri,et al.  Non-Harmonic Fourier Analysis for bladed wheels damage detection , 2015 .

[3]  Mehmet Imregun,et al.  An improved single-parameter tip-timing method for turbomachinery blade vibration measurements using optical laser probes , 1996 .

[4]  Yves Bidaut,et al.  Identification of Eigenmodes and Determination of the Dynamical Behaviour of Open Impellers , 2012 .

[5]  Paolo Neri,et al.  Analytical investigation of the SAFE diagram for bladed wheels, numerical and experimental validation , 2014 .

[6]  Christoph W. Schwingshackl,et al.  Six degrees of freedom measurement with continuous scanning laser doppler vibrometer , 2013 .

[7]  Sandro Barone,et al.  A Coded Structured Light System Based on Primary Color Stripe Projection and Monochrome Imaging , 2013, Sensors.

[8]  Chi Zhang,et al.  Real-time 3D shape inspection system of automotive parts based on structured light pattern , 2011 .

[9]  R. Abhari,et al.  Experimental Study on Impeller Blade Vibration During Resonance—Part I: Blade Vibration Due to Inlet Flow Distortion , 2009 .

[10]  Jean-François Fontaine,et al.  Systematic error correction of a 3D laser scanning measurement device , 2011 .

[11]  Paolo Neri.  Bladed wheels damage detection through Non-Harmonic Fourier Analysis improved algorithm , 2017 .

[12]  Rodrigo Nicoletti,et al.  Measurement of Shaft Orbits with Photographic Images and Sub-Sampling Technique , 2015 .

[13]  U. Fuellekrug,et al.  The projected pattern correlation technique for vibration measurements , 2004, International Conference on Vibration Measurements by Laser Techniques: Advances and Applications.

[14]  Steve Rothberg,et al.  Vibration measurements using continuous scanning laser vibrometry : Advanced aspects in rotor applications , 2006 .