Role of Moisture in the Failure of Coatings on Wood

Most wood coating tests are done either in a short term artificial weathering chamber or long term on an outdoor rack/fence. In both cases, the coatings are exposed to both ultraviolet radiation and water. This study is focused on the influence of moisture alone on wood opaque film forming coating failures. As moisture is sorbed into the wood structure, the wood swells in proportion to the volume of water sorbed. As moisture is lost, the wood shrinks in proportion to the volume of the water lost. Moisture in the wood end grain is responsible for coating failure in, for example, window corners and end to end siding. The wood cell wall moisture can be greatly reduced by a process known as acetylation which not only reduces the moisture sorbed in the cell wall but results in high levels of dimensional stability. The reduced moisture uptake along with the stability results in less stress created between the coating wood surface interface improving the performance of the coating and increasing its useful lifetime.