Passive solar sunspace in a Tibetan buddhist house in Gannan cold areas: Sensitivity analysis

[1]  R. Hwang,et al.  Identifying relative importance of solar design determinants on office building façade for cooling loads and thermal comfort in hot-humid climates , 2022, Building and Environment.

[2]  R. Hwang,et al.  Creating glazed facades performance map based on energy and thermal comfort perspective for office building design strategies in Asian hot-humid climate zone , 2022, Applied Energy.

[3]  Shilei Lu,et al.  Research on the Indoor Thermal Environment of Attached Sunspace Passive Solar Heating System Based on Zero-State Response Control Strategy , 2022, Applied Sciences.

[4]  Tianqi Zhang,et al.  A nearly zero energy building design method based on architecture form design for high solar exposure areas in China's severe cold and cold regions , 2021, Journal of Building Engineering.

[5]  Xindong Wei,et al.  A review of the application of sunspace in buildings , 2021, Energy Sources, Part A: Recovery, Utilization, and Environmental Effects.

[6]  Jasmina Radosavljević,et al.  Multi-objective optimization of energy performance for a detached residential building with a sunspace using the NSGA-II genetic algorithm , 2021, Solar Energy.

[7]  D. Li,et al.  Effect of sunspace and PCM louver combination on the energy saving of rural residences: Case study in a severe cold region of China , 2021 .

[8]  D. Aelenei,et al.  Building Façade Retrofit with Solar Passive Technologies: A Literature Review , 2021, Energies.

[9]  Enedir Ghisi,et al.  Evaluation of capabilities of different global sensitivity analysis techniques for building energy simulation: experiment on design variables , 2021, Ambiente Construído.

[10]  R. Hernández-Minguillón,et al.  Energy savings using sunspaces to preheat ventilation intake air: Experimental and simulation study , 2021 .

[11]  Valentina Serra,et al.  Characteristics that matter in a climate façade: A sensitivity analysis with building energy simulation tools , 2020 .

[12]  D. Li,et al.  Influence of sunspace on energy consumption of rural residential buildings , 2020 .

[13]  Guomin Zhang,et al.  Trombe wall for a residential building in Sichuan-Tibet alpine valley – A case study , 2020 .

[14]  Z. Zomorodian,et al.  Energy, carbon, and cost analysis of rural housing retrofit in different climates , 2020 .

[15]  J. Tu,et al.  A PMV-based HVAC control strategy for office rooms subjected to solar radiation , 2020 .

[16]  Waqas Ahmed Mahar,et al.  Sensitivity Analysis of Passive Design Strategies for Residential Buildings in Cold Semi-Arid Climates , 2020 .

[17]  Maria de Fátima Morais de Aguiar e Castro,et al.  Thermal Performance and Comfort Condition Analysis in a Vernacular Building with a Glazed Balcony , 2020, Energies.

[18]  I. Oteiza,et al.  Hygrothermal assessment of a traditional earthen wall in a dry Mediterranean climate , 2020 .

[19]  Jindong Wu,et al.  Effect of inhabitant behavioral responses on adaptive thermal comfort under hot summer and cold winter climate in China , 2020 .

[20]  Bao-Jie He,et al.  Optimizing Building Envelope Dimensions for Passive Solar Houses in the Qinghai-Tibetan Region: Window to Wall Ratio and Depth of Sunspace , 2019, Journal of Thermal Science.

[21]  Yiyun Zhu,et al.  Coupling Effect of Space-Arrangement and Wall Thermal Resistance on Indoor Thermal Environment of Passive Solar Single-Family Building in Tibet , 2019, Applied Sciences.

[22]  Xu Juan,et al.  The comparative study on the climate adaptability based on indoor physical environment of traditional dwelling in Qinba mountainous areas, China , 2019, Energy and Buildings.

[23]  Yun-Ze Li,et al.  Numerical investigation on the impact of an on-top sunspace passive heating approach for typical rural buildings in northern China , 2019, Solar Energy.

[24]  Yun-Ze Li,et al.  A novel on-top inverse sunspace conception and the passive heating effects on a typical northern China rural house , 2019, Indoor and Built Environment.

[25]  Gail Brager,et al.  Analysis of the accuracy on PMV – PPD model using the ASHRAE Global Thermal Comfort Database II , 2019, Building and Environment.

[26]  Tao Yu,et al.  Study on the Thermal Performance of a Hybrid Heat Collecting Facade Used for Passive Solar Buildings in Cold Region , 2019, Energies.

[27]  Yuanda Cheng,et al.  Experimental investigation on the heating performance of a novel designed trombe wall , 2019, Energy.

[28]  Pascal Henry Biwole,et al.  Passive design optimization of low energy buildings in different climates , 2018, Energy.

[29]  Zhijian Liu,et al.  Field measurement and numerical simulation of combined solar heating operation modes for domestic buildings based on the Qinghai–Tibetan plateau case , 2018 .

[30]  Gang Xu,et al.  The performance analysis of a novel TC-Trombe wall system in heating seasons , 2018 .

[31]  Xindong Wei,et al.  Experimental Analysis of the Thermal Performance of a Sunspace Attached to a House with a Central Air Conditioning System , 2018 .

[32]  Jean-Louis Scartezzini,et al.  Passive design optimization of newly-built residential buildings in Shanghai for improving indoor thermal comfort while reducing building energy demand , 2017, Energy and Buildings.

[33]  Diego Giuliani,et al.  Experimental monitoring of a sunspace applied to a NZEB mock-up: Assessing and comparing the energy benefits of different configurations , 2017 .

[34]  J. Nikolić,et al.  Estimation of Indoor Temperature for a Passive Solar Building with a Combined Passive Solar System , 2017 .

[35]  Baizhan Li,et al.  A study of thermal comfort in residential buildings on the Tibetan Plateau, China , 2017 .

[36]  Marco Simonetti,et al.  Potential of attached sunspaces in winter season comparing different technological choices in Central and Southern Europe , 2017 .

[37]  Amoako-AttahJoseph,et al.  Impact of conservatory as a passive solar design of UK dwellings , 2016 .

[38]  Chee Ming Lim,et al.  EnergyPlus models for the benchmarking of residential buildings in Brunei Darussalam , 2016, Energy and Buildings.

[39]  Xi Chen,et al.  A comprehensive sensitivity study of major passive design parameters for the public rental housing development in Hong Kong , 2015 .

[40]  Aurora Monge-Barrio,et al.  Energy efficiency and thermal behaviour of attached sunspaces, in the residential architecture in Spain. Summer Conditions , 2015 .

[41]  Mohammad Aminy,et al.  Experiments and simulations on the thermal performance of a sunspace attached to a room including heat-storing porous bed and water tanks , 2015 .

[42]  Jukka Lahdensivu,et al.  Energy saving potential of glazed space: Sensitivity analysis , 2015 .

[43]  Dušan Ignjatović,et al.  Application of sunspaces in fostering energy efficiency and economical viability of residential buildings in Serbia , 2015 .

[44]  Jeong Tai Kim,et al.  Development of the adaptive PMV model for improving prediction performances , 2015 .

[45]  Hejiang Sun,et al.  Analysis on building energy performance of Tibetan traditional dwelling in cold rural area of Gannan , 2015 .

[46]  Jyotirmay Mathur,et al.  Assessment of thermal environmental conditions and quantification of thermal adaptation in naturally ventilated buildings in composite climate of India , 2015 .

[47]  Laure Itard,et al.  Energy performance and comfort in residential buildings: Sensitivity for building parameters and occupancy , 2015 .

[48]  Miroslav Lambic,et al.  Estimation of Indoor Temperature for a Direct-Gain Passive Solar Building , 2014 .

[49]  Sanja Stevanović,et al.  Optimization of passive solar design strategies: A review , 2013 .

[50]  Barbara Shaw,et al.  Interpretation of passive solar field data with EnergyPlus models: Un-conventional wisdom from four sunspaces in Eugene, Oregon , 2013 .

[51]  E. Halawa,et al.  The adaptive approach to thermal comfort: A critical overview , 2012 .

[52]  Kostas Laskos,et al.  Assessing cooling energy performance of windows for office buildings in the Mediterranean zone , 2012 .

[53]  Roberto Bruno,et al.  Solar heat gains and operative temperature in attached sunspaces , 2012 .

[54]  K. Bataineh,et al.  Analysis of thermal performance of building attached sunspace , 2011 .

[55]  D. Steinberg,et al.  Computer experiments: a review , 2010 .

[56]  Qiang Wang,et al.  Situation and outlook of solar energy utilization in Tibet, China , 2009 .

[57]  R. Yao,et al.  A theoretical adaptive model of thermal comfort – Adaptive Predicted Mean Vote (aPMV) , 2009 .

[58]  Jon C. Helton,et al.  Survey of sampling-based methods for uncertainty and sensitivity analysis , 2006, Reliab. Eng. Syst. Saf..

[59]  G. Mihalakakou,et al.  Energy conservation and potential of a sunspace : sensitivity analysis , 2000 .

[60]  G. C. Bakos,et al.  Technology, thermal analysis and economic evaluation of a sunspace located in northern Greece , 2000 .

[61]  Ambrose Dodoo,et al.  Design optimization of a building attached sunspace through experimental monitoring and dynamic modelling , 2020, E3S Web of Conferences.

[62]  Dengjia Wang,et al.  The passive solar heating technologies in rural school buildings in cold climates in China , 2018 .

[63]  B. Sajadi,et al.  Sensitivity analysis of building energy performance: A simulation-based approach using OFAT and variance-based sensitivity analysis methods , 2018 .

[64]  Rehan Sadiq,et al.  Improving the energy efficiency of the existing building stock: A critical review of commercial and institutional buildings , 2016 .

[65]  Daniel Aelenei,et al.  The Use of Attached-sunspaces in Retrofitting Design: The Case of Residential Buildings in Portugal , 2014 .