The particle-size distribution of concrete and mortar aggregates by image analysis

[1]  J. Mirão,et al.  The interaction between rainwater and polished building stones for flooring and cladding - Implications in architecture , 2022, Journal of Building Engineering.

[2]  F. Sitzia,et al.  Climate change and its outcome on the archaeological areas and their building materials. The case study of Tharros (Italy) , 2022, Digital Applications in Archaeology and Cultural Heritage.

[3]  Hammad A. Khan,et al.  Performance of cementitious and alkali-activated mortars exposed to laboratory simulated microbially induced corrosion test , 2022, Cement and Concrete Composites.

[4]  M. Beltrame,et al.  Micro Destructive Analysis for the Characterization of Ancient Mortars: A Case Study from the Little Roman Bath of Nora (Sardinia, Italy) , 2021, Heritage.

[5]  J. Mirão,et al.  Building pathology and environment: Weathering and decay of stone construction materials subjected to a Csa mediterranean climate laboratory simulation , 2021 .

[6]  F. Sitzia.  The San Saturnino Basilica (Cagliari, Italy): An Up-Close Investigation about the Archaeological Stratigraphy of Mortars from the Roman to the Middle Ages , 2021, Heritage.

[7]  M. Skaf,et al.  Temporal flowability evolution of slag-based self-compacting concrete with recycled concrete aggregate , 2021 .

[8]  J. Mirão,et al.  Accelerate ageing on building stone materials by simulating daily, seasonal thermo-hygrometric conditions and solar radiation of Csa Mediterranean climate , 2021 .

[9]  H. Khater,et al.  Optimization of geopolymer mortar incorporating heavy metals in producing dense hybrid composites , 2020 .

[10]  C. Mazzoli,et al.  Comparison between different image acquisition methods for grain-size analysis and quantification of ceramic inclusions by digital image processing: how much similar are the results? , 2020, Archaeological and Anthropological Sciences.

[11]  Sitzia Fabio,et al.  Ancient restoration and production technologies of Roman mortars from monuments placed in hydrogeological risk areas: a case study , 2020, Archaeological and Anthropological Sciences.

[12]  A. S. Varzaneh,et al.  Determination of Mechanical Properties of Repair Mortars Using in Situ Methods under Different Curings , 2020 .

[13]  L. Maritan.  Archaeo-ceramic 2.0: investigating ancient ceramics using modern technological approaches , 2019, Archaeological and Anthropological Sciences.

[14]  G. Borsoi,et al.  Analytical characterization of ancient mortars from the archaeological roman site of Pisões (Beja, Portugal) , 2019, Construction and Building Materials.

[15]  F. Sitzia,et al.  Geochemical, mineral-petrographic and physical-mechanical characterization of stones and mortars from the Romanesque Saccargia Basilica (Sardinia, Italy) to define their origin and alteration , 2018, Italian Journal of Geosciences.

[16]  G. Castellano,et al.  Classification of mineral inclusions in ancient ceramics: comparing different modal analysis strategies , 2018, Archaeological and Anthropological Sciences.

[17]  B. Middendorf,et al.  Quantitative Analysis of Historic Mortars by Digital Image Analysis of Thin Sections , 2019 .

[18]  Fernando Avancini Tristão,et al.  Use of digital image analysis combined with fractal theory to determine particle morphology and surface texture of quartz sands , 2017 .

[19]  Barbara Mayer,et al.  Vitruvius The Ten Books On Architecture , 2016 .

[20]  Giorgio Verdiani,et al.  Contribution of petrophysical analysis and 3D digital survey in the archaeometric investigations of the Emperor Hadrian’s Baths (Tivoli, Italy) , 2015, Rendiconti Lincei.

[21]  F. Corfu,et al.  The quartz-dioritic Hospitais intrusion (SW Iberian Massif) and its mafic microgranular enclaves — Evidence for mineral clustering , 2015 .

[22]  Chandra L. Reedy,et al.  Image Analysis in Quantitative Particle Studies of Archaeological Ceramic Thin Sections , 2014, Advances in Archaeological Practice.

[23]  O. Gomes,et al.  Morphological Characterization of Natural and Artificial Sands Through Image Analysis , 2012 .

[24]  Gilles Mertens,et al.  Use of computer assisted image analysis for the determination of the grain-size distribution of sands used in mortars , 2006 .

[25]  M. Lake,et al.  Geographical Information Systems in Archaeology , 2006 .

[26]  F. Casadio,et al.  EVALUATION OF BINDER/AGGREGATE RATIOS IN ARCHAEOLOGICAL LIME MORTARS WITH CARBONATE AGGREGATE: A COMPARATIVE ASSESSMENT OF CHEMICAL, MECHANICAL AND MICROSCOPIC APPROACHES* , 2005 .

[27]  Marco Foi,et al.  Characterisation of Mortar Morphology in Thin Sections by Digital Image Processing , 2005 .

[28]  J. Chermant,et al.  Image analysis and mathematical morphology for civil engineering materials , 2001 .

[29]  J. Chermant,et al.  Some fields of applications of automatic image analysis in civil engineering , 2001 .

[30]  Michael Denis Higgins,et al.  Measurement of crystal size distributions , 2000 .

[31]  A. Kwan,et al.  Sphericity, shape factor, and convexity measurement of coarse aggregate for concrete using digital image processing , 2000 .

[32]  Denys Breysse,et al.  A new image analysis technique for the quantitative assessment of microcracks in cement-based materials , 2000 .

[33]  A. Kwan,et al.  Particle shape analysis of coarse aggregate using digital image processing , 1999 .

[34]  P. Navi,et al.  Three-dimensional characterization of the pore structure of a simulated cement paste , 1999 .

[35]  P Campadelli,et al.  Automated morphometric analysis in peripheral neuropathies , 1999, Comput. Biol. Medicine.

[36]  Klaudia Oleschko,et al.  Delesse principle and statistical fractal sets : 1. Dimensional equivalents , 1998 .

[37]  A. Moropoulou,et al.  Characterization of structural byzantine mortars by thermogravimetric analysis , 1998 .

[38]  Akh Kwan,et al.  Particle size distribution analysis of coarse aggregate using digital image processing , 1998 .

[39]  Jean Serra,et al.  Automatic Image Analysis Today , 1996 .