Performance of high-speed PWM control chips at cryogenic temperatures

Planetary exploration missions and deep space probes require electronics capable of low temperature operation. Such electronics will not only improve circuit performance and reliability, but also increase system efficiency, and reduce development and launch costs. DC/DC converters are an essential part of most aerospace power management distribution systems (PMAD). Therefore, DC/DC converters that can operate at cryogenic temperatures are crucial for space missions where low temperatures are encountered. An important component of a DC/DC converter is the pulse width modulation (PWM) chip that provides the control to the converter main switches. In the process of designing low temperature DC/DC converters, experimental investigations were performed to evaluate the performance of a number of high-speed PWM chips as a function of temperature in the range of 25/spl deg/C to -190/spl deg/C. These integrated circuit (IC) chips ranged in their electrical characteristics, modes of control, packaging options, and applications. This paper presents and discusses the experimental procedures along with the experimental data obtained on the investigated chips.

[1]  Richard L. Patterson,et al.  Performance evaluation of low power DC/DC converter modules at cryogenic temperatures , 2000, 2000 IEEE 31st Annual Power Electronics Specialists Conference. Conference Proceedings (Cat. No.00CH37018).

[2]  Richard L. Patterson,et al.  Characterization of low power DC/DC converter modules at cryogenic temperatures , 2000, Conference Record of the 2000 IEEE Industry Applications Conference. Thirty-Fifth IAS Annual Meeting and World Conference on Industrial Applications of Electrical Energy (Cat. No.00CH37129).

[3]  Richard L. Patterson,et al.  Evaluation of capacitors at cryogenic temperatures for space applications , 1998, Conference Record of the 1998 IEEE International Symposium on Electrical Insulation (Cat. No.98CH36239).

[4]  Richard L. Patterson,et al.  Low-Temperature Power Electronics Program , 1997 .

[5]  B. Ray,et al.  Power control electronics for cryogenic instrumentation , 1995 .

[6]  R.L. Patterson,et al.  77 K operation of a multi-resonant power converter , 1995, Proceedings of PESC '95 - Power Electronics Specialist Conference.

[7]  R. Kirschman,et al.  Cold electronics: An overview , 1984 .

[8]  Ahmad Hammoud,et al.  Efficiency and regulation of commercial low power DC/DC converter modules at low temperatures , 2000 .

[9]  O. Mueller,et al.  On-resistance, thermal resistance and reverse recovery time of power MOSFETs at 77 K , 1989 .

[10]  B. Ray,et al.  Performance of a spacecraft DC-DC converter breadboard modified for low temperature operation , 1996, IECEC 96. Proceedings of the 31st Intersociety Energy Conversion Engineering Conference.

[11]  S. Gerber,et al.  Performance of surface-mount ceramic and solid tantalum capacitors for cryogenic applications , 1998, 1998 Annual Report Conference on Electrical Insulation and Dielectric Phenomena (Cat. No.98CH36257).

[12]  Richard L. Patterson,et al.  Low temperature performance of a full-bridge DC-DC converter , 1996, IECEC 96. Proceedings of the 31st Intersociety Energy Conversion Engineering Conference.