Design of Freeform Illumination Optics

Freeform optics constitutes a new technology that is currently driving substantial changes in illumination design. It liberates designers and engineers from restrictions of optical surface geometry, enabling them to achieve compact, lightweight, and efficient illumination systems with excellent optical performance. Freeform optics is currently used widely for both fundamental research and practical applications. This Review focuses on the design of freeform illumination optics, which is a key factor in advancing the development of illumination engineering. The design methods of freeform illumination optics can be divided into two groups: zero-´etendue algorithms based on ideal source assumption and design algorithms for extended light sources. The zero-´etendue algorithms include ray mapping method, Monge–Ampere equation method, and supporting quadric method. The algorithms for extended sources include illumination optimization, feedback design, and simultaneous multiple surfaces method. The characteristics and limitations of these design methods are illustrated and a summary of these methods with future outlooks is also given.

[1]  Zhenrong Zheng,et al.  Conceptual design of dedicated road lighting for city park and housing estate. , 2013, Applied optics.

[2]  Fei Chen,et al.  Design of primary optics for LED chip array in road lighting application. , 2011, Optics express.

[3]  Zhenrong Zheng,et al.  Initial design with L(2) Monge-Kantorovich theory for the Monge-Ampère equation method in freeform surface illumination design. , 2014, Optics express.

[4]  Yi Luo,et al.  Design of compact and smooth free-form optical system with uniform illuminance for LED source. , 2010, Optics express.

[5]  K. Thompson,et al.  Freeform spectrometer enabling increased compactness , 2017, Light: Science & Applications.

[6]  Rongguang Liang,et al.  Catadioptric freeform optical system design for LED off-axis road illumination applications. , 2018, Optics express.

[7]  Xu Liu,et al.  Freeform lens for off-axis illumination in optical lithography system , 2011 .

[8]  Rongguang Liang,et al.  Ray mapping with surface information for freeform illumination design. , 2017, Optics express.

[9]  J. S. Schruben,et al.  Formulation of a Reflector-Design Problem for a Lighting Fixture , 1972 .

[10]  V. Oliker,et al.  Optical Design of Single Reflector Systems and the Monge–Kantorovich Mass Transfer Problem , 2003 .

[11]  Ching-Cherng Sun,et al.  LED array: Where does far-field begin? , 2008, Optical Engineering + Applications.

[12]  Wen-Shing Sun,et al.  Simulating the illuminance and the efficiency of the LED and fluorescent lights used in indoor lighting design. , 2008, Optics express.

[13]  Hugo Thienpont,et al.  Refractive laser beam shaping by means of a functional differential equation based design approach. , 2014, Optics express.

[14]  Xu Liu,et al.  Efficient optimal design of smooth optical freeform surfaces using ray targeting , 2013 .

[15]  Brittany D. Froese,et al.  Freeform illumination optics construction following an optimal transport map. , 2016, Applied optics.

[16]  O. Dross,et al.  Free-form integrator array optics , 2005, SPIE Optics + Photonics.

[17]  Pablo Benitez,et al.  Design in 3D geometry with the simultaneous multiple surface design method of nonimaging optics , 1999, Optics & Photonics.

[18]  Peng Qiu,et al.  High-energy-efficiency optical system for an LED-based headlamp architecture. , 2013, Applied optics.

[19]  Chuen-Lin Tien,et al.  Optical design of an LED motorcycle headlamp with compound reflectors and a toric lens. , 2015, Applied optics.

[20]  Jochen Stollenwerk,et al.  Limitations of the ray mapping approach in freeform optics design. , 2013, Optics letters.

[21]  Zexin Feng,et al.  Freeform illumination lens design using composite ray mapping , 2015 .

[22]  Roland Winston,et al.  Tailored edge-ray reflectors for illumination , 1994 .

[23]  Jochen Stollenwerk,et al.  Algorithm for irradiance tailoring using multiple freeform optical surfaces. , 2012, Optics express.

[24]  Yongjun Xie,et al.  Design of a smooth freeform illumination system for a point light source based on polar-type optimal transport mapping. , 2017, Applied optics.

[25]  J. H. M. ten Thije Boonkkamp,et al.  A Monge-Ampère-Solver for Free-Form Reflector Design , 2014, SIAM J. Sci. Comput..

[26]  Leonid L Doskolovich,et al.  On the use of the supporting quadric method in the problem of the light field eikonal calculation. , 2015, Optics express.

[27]  Marc Himel,et al.  An improved process for manufacturing diffractive optical elements (DOEs) for off-axis illumination systems , 2008, SPIE Advanced Lithography.

[28]  Chien-Cheng Kuo,et al.  Hybrid sunlight/LED illumination and renewable solar energy saving concepts for indoor lighting. , 2010, Optics express.

[29]  Juan Carlos Miñano,et al.  Compact illumination optic with three freeform surfaces for improved beam control. , 2017, Optics express.

[30]  Michael J. Hayford,et al.  Illumination optimization: The revolution has begun , 2002, International Optical Design Conference.

[31]  Leonid L Doskolovich,et al.  Design of LED refractive optics with predetermined balance of ray deflection angles between inner and outer surfaces. , 2015, Optics express.

[32]  Pablo Benítez,et al.  Aspheric V-groove reflector design with the SMS method in two dimensions. , 2010, Optics express.

[33]  Chih-Ching Hung,et al.  Modular design of the LED vehicle projector headlamp system. , 2013, Applied optics.

[34]  Kolja Brix,et al.  Designing illumination lenses and mirrors by the numerical solution of Monge-Ampère equations. , 2015, Journal of the Optical Society of America. A, Optics, image science, and vision.

[35]  Mali Gong,et al.  Beam shaping system design using double freeform optical surfaces. , 2013, Optics express.

[36]  John C. Bortz,et al.  Iterative generalized functional method of nonimaging optical design , 2007, SPIE Optical Engineering + Applications.

[37]  Leonid L Doskolovich,et al.  Designing freeform TIR optical elements using supporting quadric method. , 2017, Optics express.

[38]  Sheng Liu,et al.  Integral freeform illumination lens design of LED based pico-projector. , 2013, Applied optics.

[39]  Guofan Jin,et al.  Design method of surface contour for a freeform lens with wide linear field-of-view. , 2013, Optics express.

[40]  Rengmao Wu,et al.  Direct three-dimensional design of compact and ultra-efficient freeform lenses for extended light sources , 2016 .

[41]  Vladimir Oliker.  Freeform optical systems with prescribed irradiance properties in near-field , 2006, International Optical Design Conference.

[42]  Vladimir Oliker,et al.  Controlling light with freeform multifocal lens designed with supporting quadric method(SQM). , 2017, Optics express.

[43]  R John Koshel.  Simplex optimization method for illumination design. , 2005, Optics letters.

[44]  Peng Liu,et al.  Parametric optimization method for the design of high-efficiency free-form illumination system with a LED source , 2012 .

[45]  Herbert Gross,et al.  Ray-mapping approach in double freeform surface design for collimated beam shaping beyond the paraxial approximation. , 2017, Applied optics.

[46]  Pablo Benítez,et al.  Free-form V-groove reflector design with the SMS method in three dimensions. , 2011, Optics express.

[47]  Xiuhua Yuan,et al.  Free-form surface generation in a double pole coordinate system for off-axis illumination application. , 2017, Applied optics.

[48]  Jochen Stollenwerk,et al.  High resolution irradiance tailoring using multiple freeform surfaces. , 2013, Optics express.

[49]  Feihong Yu,et al.  Free-form reflector optimization for general lighting , 2010 .

[50]  Xu Liu,et al.  Freeform illumination design: a nonlinear boundary problem for the elliptic Monge-Ampére equation. , 2013, Optics letters.

[51]  William J. Cassarly.  Illumination merit functions , 2007, SPIE Optical Engineering + Applications.

[52]  Xu Liu,et al.  Double freeform surfaces design for laser beam shaping with Monge–Ampère equation method , 2014 .

[53]  Yi Luo,et al.  Combined feedback method for designing a free-form optical system with complicated illumination patterns for an extended LED source. , 2011, Optics express.

[54]  Yi-Chin Fang,et al.  Optical design of automotive headlight system incorporating digital micromirror device. , 2010, Applied optics.

[55]  Fei Chen,et al.  Design method of high-efficient 
LED headlamp lens. , 2010, Optics express.

[56]  Lei Zhu,et al.  Optimal Mass Transport for Registration and Warping , 2004, International Journal of Computer Vision.

[57]  Jannick Rolland,et al.  Optimization of freeform lightpipes for light-emitting-diode projectors. , 2008, Applied optics.

[58]  Zhenrong Zheng,et al.  Design beam shapers with double freeform surfaces to form a desired wavefront with prescribed illumination pattern by solving a Monge-Ampère type equation , 2016 .

[59]  Kolja Brix,et al.  Solving the Monge–Ampère equations for the inverse reflector problem , 2014, 1404.7821.

[60]  Andrzej Pawlak,et al.  Reflector luminaire with high power light-emitting diodes for general lighting. , 2008, Applied optics.

[61]  Julio Chaves,et al.  Review of SMS design methods and real-world applications , 2004, SPIE Optics + Photonics.

[62]  Yi Luo,et al.  Overlapping-based optical freeform surface construction for extended lighting source. , 2013, Optics express.

[63]  Zhenfeng Zhuang,et al.  Multi-element direct design using a freeform surface for a compact illumination system. , 2017, Applied optics.

[64]  Zexin Feng,et al.  Creating unconventional geometric beams with large depth of field using double freeform-surface optics. , 2015, Applied optics.

[65]  Xu Liu,et al.  Freeform lens arrays for off-axis illumination in an optical lithography system. , 2011, Applied optics.

[66]  Juan C. Miñano,et al.  Free-form optics for illumination , 2009 .

[67]  H. Gross,et al.  Double freeform illumination design for prescribed wavefronts and irradiances. , 2018, Journal of the Optical Society of America. A, Optics, image science, and vision.

[68]  Herbert Gross,et al.  Ray mapping approach for the efficient design of continuous freeform surfaces. , 2015, Optics express.

[69]  Zhenwu Lu,et al.  Automated optimization of an aspheric light-emitting diode lens for uniform illumination. , 2011, Applied optics.

[70]  Leonid L Doskolovich,et al.  Development of multiple-surface optical elements for road lighting. , 2017, Optics express.

[71]  Harald Ries,et al.  Tailored freeform optical surfaces. , 2002, Journal of the Optical Society of America. A, Optics, image science, and vision.

[72]  R Wester,et al.  Designing optical free-form surfaces for extended sources. , 2014, Optics express.

[73]  Uli Lemmer,et al.  New design tools for LED headlamps , 2008, Photonics Europe.

[74]  José Blen,et al.  High-efficiency free-form condenser overcoming rotational symmetry limitations. , 2008, Optics express.

[75]  R. Schwarte,et al.  Design of an aspherical lens to generate a homogenous irradiance for three-dimensional sensors with a light-emitting-diode source. , 2000, Applied optics.

[76]  Maximino Avendaño-Alejo,et al.  Modeling LED street lighting. , 2014, Applied optics.

[77]  Yi Luo,et al.  Discontinuous free-form lens design for prescribed irradiance. , 2007, Applied optics.

[78]  Guo-Fan Jin,et al.  Automated design of freeform imaging systems , 2017, Light: Science & Applications.

[79]  Juan C. Minano,et al.  Novel nonimaging lens for photodiode receivers with a prescribed angular response and maximum integrated sensitivity , 2001, SPIE Optics East.

[80]  Julio Chaves,et al.  Simultaneous multiple surface optical design method in three dimensions , 2004 .

[81]  Thomas L. R. Davenport,et al.  Optimization for illumination systems: the next level of design , 2004, SPIE Photonics Europe.

[82]  Roland Winston,et al.  7 – CONCENTRATORS FOR PRESCRIBED IRRADIANCE , 2005 .

[83]  William J. Cassarly.  Iterative reflector design using a cumulative flux compensation approach , 2010, International Optical Design Conference.

[84]  A. Cvetković,et al.  Etendue-preserving mixing and projection optics for high-luminance LEDs, applied to automotive headlamps. , 2006, Optics express.

[85]  Cristina Canavesi,et al.  Target flux estimation by calculating intersections between neighboring conic reflector patches. , 2013, Optics letters.

[86]  Leonid L. Doskolovich,et al.  Design of refractive spline surface for generating required irradiance distribution with large angular dimension , 2010 .

[87]  Miro Erkintalo,et al.  Environment, Wildlife and LED Illumination , 2015 .

[88]  J. F. Williams,et al.  An efficient approach for the numerical solution of the Monge-Ampère equation , 2011 .

[89]  Rolf Wester,et al.  Freeform lens for an efficient wall washer , 2011, Optical Systems Design.

[90]  Yi Luo,et al.  Two-step design method for highly compact three-dimensional freeform optical system for LED surface light source. , 2014, Optics express.

[91]  Leonid L Doskolovich,et al.  Design of high-efficient freeform LED lens for illumination of elongated rectangular regions. , 2011, Optics express.

[92]  D Michaelis,et al.  Cartesian oval representation of freeform optics in illumination systems. , 2011, Optics letters.

[93]  Zhenrong Zheng,et al.  A mathematical model of the single freeform surface design for collimated beam shaping. , 2013, Optics express.

[94]  Ching-Cherng Sun,et al.  High-performance LED street lighting using microlens arrays. , 2013, Optics express.

[95]  Julio Chaves,et al.  SMS design method in 3D geometry: examples and applications , 2004, SPIE Optics + Photonics.

[96]  Andreas Bräuer,et al.  Incoherent beam shaping with freeform mirror , 2008, Optical Engineering + Applications.

[97]  Jannick P Rolland,et al.  Fast freeform reflector generation usingsource-target maps. , 2010, Optics express.

[98]  Xu Liu,et al.  Freeform LED lens for uniform illumination. , 2008, Optics express.

[99]  Zhenrong Zheng,et al.  Freeform surface off-axis illumination design with the Monge-Ampère equation method in optical lithography. , 2014, Applied optics.

[100]  Yang Li,et al.  LED high-beam headlamp based on free-form microlenses. , 2014, Applied optics.

[101]  Mali Gong,et al.  Designing double freeform optical surfaces for controlling both irradiance and wavefront. , 2013, Optics express.

[102]  Jannick P. Rolland,et al.  Designing freeform reflectors for extended sources , 2009, Optical Engineering + Applications.

[103]  Jacob Rubinstein,et al.  Supporting quadric method in optical design of freeform lenses for illumination control of a collimated light , 2015, Adv. Appl. Math..

[104]  L. Doskolovich,et al.  Design of mirrors for generating prescribed continuous illuminance distributions on the basis of the supporting quadric method. , 2016, Applied optics.

[105]  James Gordon,et al.  Museum lighting: why are some illuminants preferred? , 2004, Journal of The Optical Society of America A-optics Image Science and Vision.

[106]  Andrew Riser,et al.  Automated design of a uniform distribution using faceted reflectors , 2000 .

[107]  Yongtian Wang,et al.  Simplified freeform optics design for complicated laser beam shaping. , 2017, Applied optics.

[108]  Zexin Feng,et al.  Tailoring freeform illumination optics in a double-pole coordinate system. , 2015, Applied optics.

[109]  Hsin-Yi Ma,et al.  Design of asymmetric freeform lens for low glared LED street light with total internal reflection. , 2016, Optics express.

[110]  W B Elmer.  A study in street lighting reflector design. , 1966, Applied optics.

[111]  Zexin Feng,et al.  Design of LED freeform optical system for road lighting with high luminance/illuminance ratio. , 2010, Optics express.

[112]  Harald Ries,et al.  Performance limitations of rotationally symmetric nonimaging devices , 1997 .

[113]  Youri Meuret,et al.  Flexible design method for freeform lenses with an arbitrary lens contour. , 2017, Optics letters.

[114]  Shu-Chun Chu,et al.  One-time ray-tracing method for the optimization of illumination system , 2013, Other Conferences.

[115]  John C. Bortz,et al.  Optimal design of a nonimaging TIR doublet lens for an illumination system using an LED source , 2004, SPIE Optics + Photonics.

[116]  Juan C. Miñano,et al.  Influence of the characteristics of a light source and target on the Monge-Ampére equation method in freeform optics design. , 2014, Optics letters.

[117]  Xu-jia Wang.  On the design of a reflector antenna II , 2004 .

[118]  Benjamin A. Jacobson,et al.  Beam shape transforming devices in high-efficiency projection systems , 1997, Optics + Photonics.

[119]  Hugo Thienpont,et al.  Tailored free-form optics with movement to integrate tracking in concentrating photovoltaics. , 2013, Optics express.

[120]  Leonid L Doskolovich,et al.  Variational approach to calculation of light field eikonal function for illuminating a prescribed region. , 2017, Optics express.